Part Details for LTC3835EDHC-1#TRPBF by Analog Devices Inc
Results Overview of LTC3835EDHC-1#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC3835EDHC-1#TRPBF Information
LTC3835EDHC-1#TRPBF by Analog Devices Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC3835EDHC-1#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-LTC3835EDHC-1#TRPBFTR-ND
|
DigiKey | IC REG CTRLR BUCK 16-DFN Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$5.1000 | Buy Now |
|
DISTI #
584-C3835EDHC-1TRPBF
|
Mouser Electronics | Switching Voltage Regulators L IQ Sync Buck Cntr RoHS: Compliant | 0 |
|
$5.1000 | Order Now |
|
|
Analog Devices Inc | L IQ Sync Buck Cntr Min Qty: 2500 Package Multiple: 2500 | 2500 |
|
$4.0800 / $11.4000 | Buy Now |
|
DISTI #
LTC3835EDHC-1TRPBF
|
TME | PMIC, DC/DC converter, Uin: 4÷36VDC, Uout: 0.8÷10VDC, 20A, DFN16 Min Qty: 2500 | 0 |
|
$3.5100 | RFQ |
|
DISTI #
LTC3835EDHC1TRP
|
Richardson RFPD | POWER MANAGEMENT IC RoHS: Compliant Min Qty: 2500 | 0 |
|
$5.2600 / $5.4800 | Buy Now |
Part Details for LTC3835EDHC-1#TRPBF
LTC3835EDHC-1#TRPBF CAD Models
LTC3835EDHC-1#TRPBF Part Data Attributes
|
|
LTC3835EDHC-1#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC3835EDHC-1#TRPBF
Analog Devices Inc
Low IQ Synchronous Step-Down Controller
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 5 X 3 MM, LEAD FREE, PLASTIC, MO-229WJED-1, DFN-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 05-08-1706 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Analog IC - Other Type | SWITCHING CONTROLLER | |
| Control Mode | CURRENT-MODE | |
| Control Technique | PULSE WIDTH MODULATION | |
| Input Voltage-Max | 36 V | |
| Input Voltage-Min | 4 V | |
| Input Voltage-Nom | 12 V | |
| JESD-30 Code | R-PDSO-N16 | |
| JESD-609 Code | e3 | |
| Length | 5 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | ||
| Output Current-Max | 3 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.8 mm | |
| Surface Mount | YES | |
| Switcher Configuration | PUSH-PULL | |
| Switching Frequency-Max | 580 kHz | |
| Technology | CMOS | |
| Temperature Grade | OTHER | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3 mm |
Alternate Parts for LTC3835EDHC-1#TRPBF
This table gives cross-reference parts and alternative options found for LTC3835EDHC-1#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC3835EDHC-1#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC3835EDHC-1 | Linear Technology | Check for Price | LTC3835-1 - Low IQ Synchronous Step-Down Controller; Package: DFN; Pins: 16; Temperature Range: -40°C to 85°C | LTC3835EDHC-1#TRPBF vs LTC3835EDHC-1 |
LTC3835EDHC-1#TRPBF Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the LTC3835EDHC-1#TRPBF involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to reduce noise and EMI.
-
The selection of input and output capacitors for the LTC3835EDHC-1#TRPBF depends on the specific application requirements. In general, it's recommended to use low-ESR capacitors with a high ripple current rating. The input capacitor should be at least 10uF, and the output capacitor should be at least 22uF. The capacitor values can be adjusted based on the output voltage and current requirements.
-
The maximum ambient temperature range for the LTC3835EDHC-1#TRPBF is -40°C to 125°C. However, the device can operate up to 150°C with derating. It's recommended to ensure that the device is operated within the specified temperature range to ensure optimal performance and reliability.
-
To troubleshoot issues with the LTC3835EDHC-1#TRPBF, it's recommended to follow a systematic approach. First, verify that the input voltage and current are within the specified range. Next, check the output voltage and current to ensure they are within the specified range. Check the PCB layout and ensure that it meets the recommended layout guidelines. Finally, use an oscilloscope to check for any noise or oscillations on the output voltage. If the issue persists, consult the datasheet and application notes for further guidance.
-
The LTC3835EDHC-1#TRPBF is a commercial-grade device, but it can be used in high-reliability or aerospace applications with proper qualification and testing. It's recommended to consult with Analog Devices Inc. for specific guidance on using the device in such applications, and to ensure that the device meets the required specifications and standards.