Part Details for LTC3736EUF-2#PBF by Analog Devices Inc
Results Overview of LTC3736EUF-2#PBF by Analog Devices Inc
- Distributor Offerings: (8 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC3736EUF-2#PBF Information
LTC3736EUF-2#PBF by Analog Devices Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC3736EUF-2#PBF
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
02AM2421
|
Newark | Dc/Dc Ctrl, Sync Buck, 750Khz, Qfn-Ep Rohs Compliant: Yes |Analog Devices LTC3736EUF-2#PBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 0 |
|
$6.5900 / $13.2200 | Buy Now |
DISTI #
LTC3736EUF-2#PBF-ND
|
DigiKey | IC REG CTRLR BUCK 24QFN Min Qty: 1 Lead time: 10 Weeks Container: Tube |
17 In Stock |
|
$5.8875 / $12.0600 | Buy Now |
DISTI #
584-LTC3736EUF-2#PBF
|
Mouser Electronics | Switching Voltage Regulators 2x 2-Phase, No RSENSE Sync Cntr w/ Out T RoHS: Compliant | 56 |
|
$6.4000 / $10.6100 | Buy Now |
|
Analog Devices Inc | 2x 2-Phase, No RSENSE Sync Cnt Package Multiple: 91 | 1551 |
|
$4.7100 / $12.0600 | Buy Now |
DISTI #
35216488
|
Verical | DC/DC Cntrlr Dual-OUT Step Down 850kHz 24-Pin QFN EP Tube RoHS: Compliant Min Qty: 91 Package Multiple: 91 | Americas - 1547 |
|
$5.9245 | Buy Now |
DISTI #
LTC3736EUF-2PBF
|
TME | PMIC, DC/DC converter, Uin: 2.75÷9.8VDC, Uout: 0.6÷9.8VDC, 5A, SMD Min Qty: 1 | 0 |
|
$5.8500 / $8.5800 | RFQ |
DISTI #
LTC3736EUF-2PBF
|
Richardson RFPD | POWER MANAGEMENT IC RoHS: Compliant Min Qty: 91 | 0 |
|
$6.0800 / $7.0700 | Buy Now |
|
Flip Electronics | Stock, ship today | 273 |
|
RFQ |
Part Details for LTC3736EUF-2#PBF
LTC3736EUF-2#PBF CAD Models
LTC3736EUF-2#PBF Part Data Attributes
|
LTC3736EUF-2#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC3736EUF-2#PBF
Analog Devices Inc
Dual 2-Phase, No RSENSE™, Synchronous Controller with Output Tracking
|
Pbfree Code | No | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | ANALOG DEVICES INC | |
Package Description | 4 X 4 MM, LEAD FREE, PLASTIC, MO-220WGGD, QFN-24 | |
Pin Count | 24 | |
Manufacturer Package Code | 05-08-1697 | |
Reach Compliance Code | compliant | |
Analog IC - Other Type | DUAL SWITCHING CONTROLLER | |
Control Mode | CURRENT-MODE | |
Control Technique | PULSE WIDTH MODULATION | |
Input Voltage-Max | 9.8 V | |
Input Voltage-Min | 2.75 V | |
Input Voltage-Nom | 4.2 V | |
JESD-30 Code | S-PQCC-N24 | |
JESD-609 Code | e3 | |
Length | 4 mm | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 1 | |
Number of Terminals | 24 | |
Operating Temperature-Max | 85 °C | |
Operating Temperature-Min | ||
Output Current-Max | 1 A | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | HVQCCN | |
Package Shape | SQUARE | |
Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
Peak Reflow Temperature (Cel) | 260 | |
Qualification Status | Not Qualified | |
Seated Height-Max | 0.8 mm | |
Surface Mount | YES | |
Switcher Configuration | PUSH-PULL | |
Switching Frequency-Max | 825 kHz | |
Technology | CMOS | |
Temperature Grade | OTHER | |
Terminal Finish | Matte Tin (Sn) | |
Terminal Form | NO LEAD | |
Terminal Pitch | 0.5 mm | |
Terminal Position | QUAD | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Width | 4 mm |
Alternate Parts for LTC3736EUF-2#PBF
This table gives cross-reference parts and alternative options found for LTC3736EUF-2#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC3736EUF-2#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
LTC3736EUF-2 | Linear Technology | Check for Price | LTC3736-2 - Dual 2-Phase, No RSENSE Synchronous Controller with Output Tracking; Package: QFN; Pins: 24; Temperature Range: -40°C to 85°C | LTC3736EUF-2#PBF vs LTC3736EUF-2 |
LTC3736EUF-2 | Analog Devices Inc | Check for Price | Dual Switching Controller, Current-mode, 1A, 825kHz Switching Freq-Max, PQCC24 | LTC3736EUF-2#PBF vs LTC3736EUF-2 |
LTC3736EUF-2#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC3736EUF-2#PBF involves keeping the high-current paths short and wide, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a 4-layer board with a dedicated power plane and a dedicated ground plane to reduce noise and EMI.
-
The selection of external components for the LTC3736EUF-2#PBF depends on the specific application requirements, such as the input voltage, output voltage, and output current. A good starting point is to use the component values recommended in the datasheet, and then adjust them based on the specific requirements of the application. It's also recommended to use components with low ESR and high ripple current ratings to ensure reliable operation.
-
The maximum ambient temperature that the LTC3736EUF-2#PBF can operate at is 85°C, with a junction temperature of up to 125°C. However, it's recommended to derate the device's performance at high temperatures to ensure reliable operation.
-
Common issues with the LTC3736EUF-2#PBF can be troubleshooted by checking the PCB layout, component values, and input/output connections. Oscillations or instability can be caused by poor PCB layout, incorrect component values, or inadequate decoupling. It's recommended to use a scope to measure the output voltage and current, and to check for any signs of oscillation or instability.
-
Yes, the LTC3736EUF-2#PBF can be used in a synchronous buck converter configuration, which can improve efficiency and reduce heat generation. However, it's recommended to use a dedicated synchronous rectifier controller, such as the LTC6992, to ensure proper operation and to minimize losses.