Part Details for LTC3414IFE#PBF by Linear Technology
Results Overview of LTC3414IFE#PBF by Linear Technology
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
LTC3414IFE#PBF Information
LTC3414IFE#PBF by Linear Technology is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC3414IFE#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Other Function Semiconductors | 563 |
|
RFQ | |
|
|
Win Source Electronics | IC REG BUCK ADJ 4A SYNC 20TSSOP / Conv DC-DC 2.25V to 5.5V Synchronous Step Down Single-Out 0.8V to 5V 4A Automotive 20-Pin TSSOP EP Tube | 5500 |
|
$23.9374 / $35.9055 | Buy Now |
Part Details for LTC3414IFE#PBF
LTC3414IFE#PBF CAD Models
LTC3414IFE#PBF Part Data Attributes
|
|
LTC3414IFE#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC3414IFE#PBF
Linear Technology
LTC3414 - 4A, 4MHz, Monolithic Synchronous Step-Down Regulator; Package: TSSOP; Pins: 20; Temperature Range: -40°C to 85°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | TSSOP | |
| Package Description | 4.40 MM, LEAD FREE, PLASTIC, TSSOP-20 | |
| Pin Count | 20 | |
| Manufacturer Package Code | FE | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | CURRENT-MODE | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 2.25 V | |
| Input Voltage-Nom | 3.3 V | |
| JESD-30 Code | R-PDSO-G20 | |
| JESD-609 Code | e3 | |
| Length | 6.5 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | ||
| Output Current-Max | 9.5 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HTSSOP | |
| Package Equivalence Code | TSSOP20,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.2 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 4000 kHz | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL EXTENDED | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 4.4 mm |
Alternate Parts for LTC3414IFE#PBF
This table gives cross-reference parts and alternative options found for LTC3414IFE#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC3414IFE#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC3414IFE#TRPBF | Analog Devices Inc | $7.6438 | 4A, 4MHz, Monolithic Synchronous Step-Down Regulator | LTC3414IFE#PBF vs LTC3414IFE#TRPBF |
| LTC3414EFE#PBF | Linear Technology | Check for Price | LTC3414 - 4A, 4MHz, Monolithic Synchronous Step-Down Regulator; Package: TSSOP; Pins: 20; Temperature Range: -40°C to 85°C | LTC3414IFE#PBF vs LTC3414EFE#PBF |
LTC3414IFE#PBF Frequently Asked Questions (FAQ)
-
The maximum input voltage that the LTC3414 can handle is 36V, but it's recommended to keep it below 34V for reliable operation.
-
To optimize inductor selection, consider the inductor's saturation current, DC resistance, and core material. A good starting point is to choose an inductor with a saturation current rating of at least 1.5 times the maximum output current, and a DC resistance of less than 100mΩ.
-
The SYNC pin is used to synchronize the switching frequency of multiple LTC3414 devices in a system, ensuring that they operate in phase and reducing electromagnetic interference (EMI).
-
To configure the LTC3414 for a specific output voltage, use the FB pin and a resistive divider network to set the output voltage. The FB pin is connected to the output voltage through a resistive divider, and the output voltage is set by adjusting the ratio of the resistors.
-
The thermal shutdown temperature of the LTC3414 is typically around 150°C, but it can vary depending on the specific package and operating conditions.