Part Details for LTC3407EMSE-4#PBF by Analog Devices Inc
Results Overview of LTC3407EMSE-4#PBF by Analog Devices Inc
- Distributor Offerings: (7 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
LTC3407EMSE-4#PBF Information
LTC3407EMSE-4#PBF by Analog Devices Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC3407EMSE-4#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
4407100
|
Farnell | DC/DC CONV, SYNC BUCK, 2.7MHZ, 85DEG C RoHS: Compliant Min Qty: 1 Lead time: 11 Weeks, 1 Days Container: Each | 100 |
|
$5.0077 / $8.9262 | Buy Now |
|
DISTI #
LTC3407EMSE-4#PBF-ND
|
DigiKey | IC REG BUCK ADJ 800MA DL 10MSOP Min Qty: 1 Lead time: 10 Weeks Container: Tube |
59 In Stock |
|
$4.4250 / $9.7500 | Buy Now |
|
DISTI #
584-LTC3407EMSE-4PBF
|
Mouser Electronics | Switching Voltage Regulators 2x Sync, 800mA, 2.25MHz Buck DC/DC Reg RoHS: Compliant | 10 |
|
$4.5900 / $8.1900 | Buy Now |
|
DISTI #
V36:1790_06469290
|
Arrow Electronics | Conv DC-DC 2.5V to 5.5V Synchronous Step Down Dual-Out 0.6V to 5V 0.8A/0.8A 10-Pin MSOP EP Tube RoHS: Compliant Min Qty: 100 Package Multiple: 50 Lead time: 10 Weeks Date Code: 2052 | Americas - 3 |
|
$4.1330 | Buy Now |
|
|
Analog Devices Inc | 2x Sync, 800mA, 2.25MHz Buck D Package Multiple: 50 | 12 |
|
$3.5400 / $9.7500 | Buy Now |
|
DISTI #
LTC3407EMSE-4PBF
|
TME | PMIC, DC/DC converter, Uin: 2.5÷5.5VDC, Uout: 0.6÷5.5VDC, 1.2A Min Qty: 1 | 0 |
|
$3.9900 / $5.8600 | RFQ |
|
DISTI #
LTC3407EMSE-4PB
|
Richardson RFPD | DC TO DC CONVERTER RoHS: Compliant Min Qty: 100 | 0 |
|
$4.5700 / $5.0200 | Buy Now |
Part Details for LTC3407EMSE-4#PBF
LTC3407EMSE-4#PBF CAD Models
LTC3407EMSE-4#PBF Part Data Attributes
|
|
LTC3407EMSE-4#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC3407EMSE-4#PBF
Analog Devices Inc
Dual Synchronous, 800mA, 2.25MHz Step-Down DC/DC Regulator
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | LEAD FREE, PLASTIC, MSOP-10 | |
| Pin Count | 10 | |
| Manufacturer Package Code | 05-08-1664 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER | |
| Control Mode | CURRENT-MODE | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 2.5 V | |
| Input Voltage-Nom | 3.6 V | |
| JESD-30 Code | S-PDSO-G10 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 10 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | ||
| Output Current-Max | 1.6 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HTSSOP | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Surface Mount | YES | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 2700 kHz | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL EXTENDED | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3 mm |
Alternate Parts for LTC3407EMSE-4#PBF
This table gives cross-reference parts and alternative options found for LTC3407EMSE-4#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC3407EMSE-4#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC3407EMSE-4#PBF | Linear Technology | Check for Price | LTC3407-4 - Dual Synchronous, 800mA, 2.25MHz Step-Down DC/DC Regulator; Package: MSOP; Pins: 10; Temperature Range: -40°C to 85°C | LTC3407EMSE-4#PBF vs LTC3407EMSE-4#PBF |
| LTC3407EMSE-4 | Analog Devices Inc | Check for Price | Dual Switching Controller, Current-mode, 1.6A, 2700kHz Switching Freq-Max, PDSO10 | LTC3407EMSE-4#PBF vs LTC3407EMSE-4 |
| LTC3407EMSE-4 | Linear Technology | Check for Price | LTC3407-4 - Dual Synchronous, 800mA, 2.25MHz Step-Down DC/DC Regulator; Package: MSOP; Pins: 10; Temperature Range: -40°C to 85°C | LTC3407EMSE-4#PBF vs LTC3407EMSE-4 |
LTC3407EMSE-4#PBF Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the LTC3407EMSE-4#PBF is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
-
To ensure the stability of the output voltage, it's essential to follow the recommended layout and component selection guidelines, including the use of a suitable output capacitor and a low-ESR input capacitor. Additionally, the input voltage should be well-regulated and free of noise.
-
The minimum input voltage required for the LTC3407EMSE-4#PBF to operate is 2.5V, but it's recommended to keep it above 3V for optimal performance and to ensure that the output voltage remains within the specified tolerance.
-
The LTC3407EMSE-4#PBF is rated for operation up to 125°C, but it's essential to ensure that the device is properly heatsinked and that the ambient temperature is within the specified range to prevent overheating and ensure reliable operation.
-
The output voltage of the LTC3407EMSE-4#PBF can be calculated using the formula: VOUT = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors used to set the output voltage. The output voltage can be adjusted by changing the values of R1 and R2.