Part Details for LTC3124EDHC#TRPBF by Analog Devices Inc
Results Overview of LTC3124EDHC#TRPBF by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC3124EDHC#TRPBF Information
LTC3124EDHC#TRPBF by Analog Devices Inc is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC3124EDHC#TRPBF
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
LTC3124EDHC#TRPBFCT-ND
|
DigiKey | IC REG BOOST ADJ 2.5A 16DFN Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
3670 In Stock |
|
$4.8875 / $10.4900 | Buy Now |
DISTI #
584-LTC3124EDHCTRPBF
|
Mouser Electronics | Switching Voltage Regulators 15V, 5A 2-PhSync Boost DC/DC Conv w/ Out RoHS: Compliant | 2579 |
|
$5.3500 / $8.9700 | Buy Now |
|
Analog Devices Inc | 15V, 5A 2-PhSync Boost DC/DC C Min Qty: 1 Package Multiple: 2500 | 3234 |
|
$3.9100 / $10.4900 | Buy Now |
DISTI #
LTC3124EDHCTRPB
|
Richardson RFPD | DC TO DC CONVERTER RoHS: Compliant Min Qty: 2500 | 0 |
|
$5.0500 / $5.2400 | Buy Now |
Part Details for LTC3124EDHC#TRPBF
LTC3124EDHC#TRPBF CAD Models
LTC3124EDHC#TRPBF Part Data Attributes
|
LTC3124EDHC#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC3124EDHC#TRPBF
Analog Devices Inc
15V, 5A 2-Phase Synchronous Step-Up DC/DC Converter with Output Disconnect
|
Pbfree Code | No | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | ANALOG DEVICES INC | |
Package Description | 5 X 3 MM, LEAD FREE, PLASTIC, MO-229WJED-1, DFN-16 | |
Pin Count | 16 | |
Manufacturer Package Code | 05-08-1706 | |
Reach Compliance Code | compliant | |
Samacsys Manufacturer | Analog Devices | |
Additional Feature | OUTPUT VOLTAGE RANGE FROM 2.5 VOLT TO 15 VOLT | |
Analog IC - Other Type | SWITCHING REGULATOR | |
Control Mode | CURRENT-MODE | |
Control Technique | PULSE WIDTH MODULATION | |
Input Voltage-Max | 5.5 V | |
Input Voltage-Min | 0.5 V | |
Input Voltage-Nom | 3.6 V | |
JESD-30 Code | R-PDSO-G16 | |
JESD-609 Code | e3 | |
Length | 5 mm | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 1 | |
Number of Terminals | 16 | |
Operating Temperature-Max | 85 °C | |
Operating Temperature-Min | ||
Output Voltage-Nom | 12 V | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | HVSSOP | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH | |
Peak Reflow Temperature (Cel) | 260 | |
Seated Height-Max | 0.8 mm | |
Surface Mount | YES | |
Switcher Configuration | BOOST | |
Switching Frequency-Max | 1170 kHz | |
Technology | CMOS | |
Temperature Grade | OTHER | |
Terminal Finish | Matte Tin (Sn) | |
Terminal Form | GULL WING | |
Terminal Pitch | 0.5 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Width | 3 mm |
Alternate Parts for LTC3124EDHC#TRPBF
This table gives cross-reference parts and alternative options found for LTC3124EDHC#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC3124EDHC#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
TPS61022RWUT | Texas Instruments | Check for Price | 8-A boost converter with 0.5-V ultra-low input voltage 7-VQFN-HR -40 to 125 | LTC3124EDHC#TRPBF vs TPS61022RWUT |
TPS61235PRWLT | Texas Instruments | Check for Price | 8-A valley current, 5.1-V fixed output voltage synchronous boost converters 9-VQFN-HR -40 to 125 | LTC3124EDHC#TRPBF vs TPS61235PRWLT |
TPS61236PRWLT | Texas Instruments | Check for Price | 8-A valley current, adjustable output voltage synchronous boost converters 9-VQFN-HR -40 to 125 | LTC3124EDHC#TRPBF vs TPS61236PRWLT |
LTC3124EDHC#TRPBF Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the VIN pin is 18V, but it's recommended to keep it below 15V for optimal performance and reliability.
-
To optimize the inductor selection, consider the inductor's saturation current, DC resistance, and core material. A good starting point is to choose an inductor with a saturation current rating above the peak current of the converter, and a DC resistance that minimizes losses.
-
For optimal performance, keep the power components (L, C, and R) close to the IC, and use a solid ground plane to reduce noise and EMI. Keep the input and output capacitors close to the VIN and VOUT pins, respectively, and use a Kelvin connection for the sense resistors.
-
The output voltage of the LTC3124 can be adjusted by changing the resistor divider ratio of the feedback network (RFBT and RFB B). Use the formula VOUT = 0.8V x (1 + RFBT/RFB) to calculate the desired resistor values.
-
The RUN pin is an active-high enable input that allows the user to turn the converter on and off. Connect the RUN pin to VIN or a logic signal to enable the converter, and connect it to GND to disable it.