Part Details for LTC2901-2CGN#TRPBF by Analog Devices Inc
Results Overview of LTC2901-2CGN#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
LTC2901-2CGN#TRPBF Information
LTC2901-2CGN#TRPBF by Analog Devices Inc is a Power Management Circuit.
Power Management Circuits are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC2901-2CGN#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC2901-2CGN#TRPBF-ND
|
DigiKey | IC SUPERVISOR 4 CHANNEL 16SSOP Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$3.9000 | Buy Now |
|
DISTI #
584-C2901-2CGNTRPBF
|
Mouser Electronics | Supervisory Circuits Progmable 4x S Mon w/ Adj Reset & Watch RoHS: Compliant | 0 |
|
$3.9000 | Order Now |
|
|
Analog Devices Inc | Progmable 4x S Mon w/ Adj Res Min Qty: 2500 Package Multiple: 2500 | 0 |
|
$3.1200 / $3.9000 | Buy Now |
|
DISTI #
LTC2901-2CGNTRP
|
Richardson RFPD | POWER MANAGEMENT IC RoHS: Compliant Min Qty: 2500 | 0 |
|
$4.0300 / $4.1900 | Buy Now |
|
|
Vyrian | Peripheral ICs | 1299 |
|
RFQ |
Part Details for LTC2901-2CGN#TRPBF
LTC2901-2CGN#TRPBF CAD Models
LTC2901-2CGN#TRPBF Part Data Attributes
|
|
LTC2901-2CGN#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2901-2CGN#TRPBF
Analog Devices Inc
Programmable Quad Supply Monitor with Adjustable Reset and Watchdog Timers
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.150 INCH, LEAD FREE, PLASTIC, SSOP-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 05-08-1641 (GN16) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | BAT BUP SW:N;MNL RST:N;OV DET:N;PW FL IP:N;PW FL IO:N;PW FL OP:N;PRG RST DLY:Y;UV DET:N;WD:Y;WWD:N | |
| Adjustable Threshold | YES | |
| Analog IC - Other Type | VOLTAGE SUPERVISOR/RESET IC | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 4.8895 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Channels | 4 | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.899 mm |
Alternate Parts for LTC2901-2CGN#TRPBF
This table gives cross-reference parts and alternative options found for LTC2901-2CGN#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2901-2CGN#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2901-2CGN#TR | Analog Devices Inc | Check for Price | Power Supply Management Circuit, Adjustable, 4 Channel, CMOS, PDSO16 | LTC2901-2CGN#TRPBF vs LTC2901-2CGN#TR |
| LTC2901-2IGN | Analog Devices Inc | Check for Price | Power Supply Management Circuit, Adjustable, 4 Channel, CMOS, PDSO16 | LTC2901-2CGN#TRPBF vs LTC2901-2IGN |
| LTC2901-2IGN#TR | Analog Devices Inc | Check for Price | Power Supply Management Circuit, Adjustable, 4 Channel, CMOS, PDSO16 | LTC2901-2CGN#TRPBF vs LTC2901-2IGN#TR |
| LTC2901-2CGN#TR | Linear Technology | Check for Price | LTC2901 - Programmable Quad Supply Monitor with Adjustable Reset and Watchdog Timers; Package: SSOP; Pins: 16; Temperature Range: 0°C to 70°C | LTC2901-2CGN#TRPBF vs LTC2901-2CGN#TR |
| LTC2901-2CGN | Analog Devices Inc | Check for Price | Power Supply Management Circuit, Adjustable, 4 Channel, CMOS, PDSO16 | LTC2901-2CGN#TRPBF vs LTC2901-2CGN |
| LTC2901-2IGN | Linear Technology | Check for Price | LTC2901 - Programmable Quad Supply Monitor with Adjustable Reset and Watchdog Timers; Package: SSOP; Pins: 16; Temperature Range: -40°C to 85°C | LTC2901-2CGN#TRPBF vs LTC2901-2IGN |
| LTC2901-2IGN#PBF | Linear Technology | Check for Price | LTC2901 - Programmable Quad Supply Monitor with Adjustable Reset and Watchdog Timers; Package: SSOP; Pins: 16; Temperature Range: -40°C to 85°C | LTC2901-2CGN#TRPBF vs LTC2901-2IGN#PBF |
LTC2901-2CGN#TRPBF Frequently Asked Questions (FAQ)
-
It is recommended to place the LTC2901-2CGN#TRPBF close to the voltage source being monitored, and to use a solid ground plane to minimize noise. Additionally, keep the input traces short and away from high-frequency signals, and use a low-ESR capacitor for the VCC bypass.
-
To ensure accuracy, use a high-precision voltage reference, and calibrate the LTC2901-2CGN#TRPBF at multiple voltage points. Additionally, consider using a voltage buffer or amplifier to condition the input signal, and ensure that the input voltage range is within the specified operating range of the device.
-
The maximum cable length and type depend on the specific application and noise environment. As a general guideline, use a shielded cable with a length of less than 10 inches (25 cm) to minimize noise pickup. For longer cable lengths, consider using a differential signaling scheme or a isolated voltage sensing approach.
-
The LTC2901-2CGN#TRPBF has built-in overvoltage protection on the input pins, but it is still recommended to add external protection circuitry, such as a voltage clamp or a TVS diode, to prevent damage from high-voltage transients or faults.
-
The recommended power-up sequence is to apply the VCC supply voltage first, followed by the input voltage being monitored. This ensures that the internal voltage reference and analog circuitry are properly initialized before the input voltage is applied.