-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LTC2871IFE#PBF by Analog Devices Inc
Results Overview of LTC2871IFE#PBF by Analog Devices Inc
- Distributor Offerings: (7 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC2871IFE#PBF Information
LTC2871IFE#PBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC2871IFE#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
51AK6643
|
Newark | Transceiver, Rs232, Rs485, 2Tx, 2Rx, Ic Type:Rs232/Rs485 Transceiver, No. Of Receivers:2Receivers, No. Of Transmitters:3, Communication Mode:Half Duplex, Full Duplex, Data Rate Max:20Mbps, Supply Voltage Min:3V, No. Of Pins:38Pins Rohs Compliant: Yes |Analog Devices LTC2871IFE#PBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 50 |
|
$10.6800 / $18.7300 | Buy Now |
|
DISTI #
LTC2871IFE#PBF-ND
|
DigiKey | IC TRANSCEIVER FULL 3/5 38TSSOP Min Qty: 1 Lead time: 10 Weeks Container: Tube |
190 In Stock |
|
$10.5250 / $18.7300 | Buy Now |
|
DISTI #
584-LTC2871IFE#PBF
|
Mouser Electronics | RS-232 Interface IC RS232/RS485 Multiprotocol Trans w/ Int T RoHS: Compliant | 473 |
|
$10.8800 / $18.0100 | Buy Now |
|
|
Analog Devices Inc | RS232/RS485 Multiprotocol Tran Package Multiple: 50 | 38 |
|
$8.4200 / $18.7300 | Buy Now |
|
DISTI #
69704185
|
Verical | Single Transmitter/Receiver RS-232/RS-422/RS-485 38-Pin TSSOP EP Tube RoHS: Compliant Min Qty: 30 Package Multiple: 30 Date Code: 2312 | Americas - 30 |
|
$9.2800 | Buy Now |
|
DISTI #
LTC2871IFE#PBF
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 50 | 0 |
|
$10.8700 / $12.6300 | Buy Now |
|
|
Cytech Systems Limited | IC TRANSCEIVER FULL 3/5 38TSSOP | 5000 |
|
RFQ |
Part Details for LTC2871IFE#PBF
LTC2871IFE#PBF CAD Models
LTC2871IFE#PBF Part Data Attributes
|
|
LTC2871IFE#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2871IFE#PBF
Analog Devices Inc
RS232/RS485 Multiprotocol Transceivers with Integrated Termination
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | TSSOP-38 | |
| Pin Count | 38 | |
| Manufacturer Package Code | 05-08-1772 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | YES | |
| Driver Number of Bits | 3 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232; EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G38 | |
| JESD-609 Code | e3 | |
| Length | 9.7 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 3 | |
| Number of Terminals | 38 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HTSSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 200 ns | |
| Receiver Number of Bits | 3 | |
| Seated Height-Max | 1.2 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 1.7 V | |
| Supply Voltage-Nom | 3.3 V | |
| Supply Voltage1-Max | 5.5 V | |
| Supply Voltage1-Min | 3 V | |
| Supply Voltage1-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 70 ns | |
| Width | 4.4 mm |
Alternate Parts for LTC2871IFE#PBF
This table gives cross-reference parts and alternative options found for LTC2871IFE#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2871IFE#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2871CFE#TRPBF | Analog Devices Inc | Check for Price | RS232/RS485 Multiprotocol Transceivers with Integrated Termination | LTC2871IFE#PBF vs LTC2871CFE#TRPBF |
| LTC2871IFE#TRPBF | Analog Devices Inc | Check for Price | RS232/RS485 Multiprotocol Transceivers with Integrated Termination | LTC2871IFE#PBF vs LTC2871IFE#TRPBF |
| LTC2871CFE#PBF | Linear Technology | Check for Price | LTC2871 - RS232/RS485 Multiprotocol Transceivers with Integrated Termination; Package: TSSOP; Pins: 38; Temperature Range: 0°C to 70°C | LTC2871IFE#PBF vs LTC2871CFE#PBF |
| LTC2871IFE#TRPBF | Linear Technology | Check for Price | LTC2871 - RS232/RS485 Multiprotocol Transceivers with Integrated Termination; Package: TSSOP; Pins: 38; Temperature Range: -40°C to 85°C | LTC2871IFE#PBF vs LTC2871IFE#TRPBF |
| LTC2871IFE#PBF | Linear Technology | Check for Price | LTC2871 - RS232/RS485 Multiprotocol Transceivers with Integrated Termination; Package: TSSOP; Pins: 38; Temperature Range: -40°C to 85°C | LTC2871IFE#PBF vs LTC2871IFE#PBF |
LTC2871IFE#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2871IFE involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, keep the analog and digital signal traces separate and avoid crossing them over each other.
-
To ensure reliable communication with the LTC2871IFE, make sure to use a reliable clock source, use a pull-up resistor on the SCL line, and ensure that the I2C bus is properly terminated. Also, avoid using long cables and ensure that the I2C bus is not heavily loaded.
-
The maximum cable length for the I2C bus with the LTC2871IFE depends on the specific application and the capacitance of the bus. As a general rule, the maximum cable length should be limited to 1 meter to ensure reliable communication. However, this can be extended up to 3 meters with proper termination and a low-capacitance bus.
-
To ensure proper power-up and power-down sequencing with the LTC2871IFE, make sure to power up the device after the power supply has stabilized. Also, ensure that the power-down sequence is slow enough to allow the device to properly shut down. A power-down sequence of 10ms to 100ms is recommended.
-
The recommended power supply decoupling for the LTC2871IFE involves using a 10uF ceramic capacitor in parallel with a 1uF ceramic capacitor, both placed close to the device. Additionally, a 100nF ceramic capacitor can be used to decouple the analog supply.