Part Details for LTC2862HS8-1#TRPBF by Analog Devices Inc
Results Overview of LTC2862HS8-1#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LTC2862HS8-1#TRPBF Information
LTC2862HS8-1#TRPBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC2862HS8-1#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-LTC2862HS8-1#TRPBFTR-ND
|
DigiKey | IC TRANSCEIVER HALF 1/1 8SO Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$3.0750 | Buy Now |
|
DISTI #
584-C2862HS8-1TRPBF
|
Mouser Electronics | RS-422/RS-485 Interface IC 60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers RoHS: Compliant | 0 |
|
$3.0700 / $7.7200 | Order Now |
|
|
Analog Devices Inc | ±60V Fault Protected 3V to 5.5 Min Qty: 2500 Package Multiple: 2500 | 0 |
|
$2.4600 / $7.4500 | Buy Now |
|
DISTI #
LTC2862HS8-1TRP
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 2500 | 0 |
|
$3.1700 / $3.3000 | Buy Now |
|
|
Vyrian | Peripheral ICs | 964 |
|
RFQ |
Part Details for LTC2862HS8-1#TRPBF
LTC2862HS8-1#TRPBF CAD Models
LTC2862HS8-1#TRPBF Part Data Attributes
|
|
LTC2862HS8-1#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2862HS8-1#TRPBF
Analog Devices Inc
±60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.150 INCH, LEAD FREE, PLASTIC, SOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 05-08-1610 (S8) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9025 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Receive Delay-Max | 65 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.752 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 50 ns | |
| Width | 3.899 mm |
Alternate Parts for LTC2862HS8-1#TRPBF
This table gives cross-reference parts and alternative options found for LTC2862HS8-1#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2862HS8-1#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2862CS8-1#PBF | Analog Devices Inc | $3.3256 | ±60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers | LTC2862HS8-1#TRPBF vs LTC2862CS8-1#PBF |
| LTC2862IS8-1#TRPBF | Analog Devices Inc | $3.5283 | ±60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers | LTC2862HS8-1#TRPBF vs LTC2862IS8-1#TRPBF |
| LTC2862CS8-1#TRPBF | Analog Devices Inc | $3.5378 | ±60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers | LTC2862HS8-1#TRPBF vs LTC2862CS8-1#TRPBF |
| LTC2862HS8-1#PBF | Analog Devices Inc | $3.5440 | ±60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers | LTC2862HS8-1#TRPBF vs LTC2862HS8-1#PBF |
| LTC2862IS8-1#PBF | Linear Technology | Check for Price | LTC2862 - ±60V Fault Protected 3V to 5.5V RS485/RS422 Transceivers; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C | LTC2862HS8-1#TRPBF vs LTC2862IS8-1#PBF |
LTC2862HS8-1#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2862HS8-1#TRPBF involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a low-ESR capacitor for the VCC pin and to keep the signal traces short and away from noise sources.
-
To ensure proper power-up and initialization, make sure to follow the recommended power-up sequence, which is to apply VCC before applying any input signals. Also, ensure that the EN pin is high during power-up and that the device is properly configured through the SPI interface.
-
The LTC2862HS8-1#TRPBF has a maximum junction temperature of 150°C. To prevent overheating, ensure good airflow around the device, use a heat sink if necessary, and avoid operating the device at maximum power dissipation for extended periods. Also, monitor the device temperature using the internal temperature sensor.
-
To troubleshoot issues with the LTC2862HS8-1#TRPBF, start by verifying the power supply and input signals, then check the device configuration and register settings. Use a logic analyzer or oscilloscope to monitor the device's behavior and output signals. Consult the datasheet and application notes for troubleshooting guides and common pitfalls to avoid.
-
The LTC2862HS8-1#TRPBF is designed to meet EMI/EMC regulatory standards, but proper PCB layout, grounding, and shielding are still essential. Ensure that the device is properly decoupled, use a common-mode choke for the input signals, and follow good EMI/EMC design practices to minimize radiation and susceptibility.