Part Details for LTC2858IMS-1#PBF by Analog Devices Inc
Results Overview of LTC2858IMS-1#PBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC2858IMS-1#PBF Information
LTC2858IMS-1#PBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC2858IMS-1#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-LTC2858IMS-1#PBF-ND
|
DigiKey | IC TRANSCEIVER FULL 1/1 10MSOP Min Qty: 1 Lead time: 10 Weeks Container: Tube |
317 In Stock |
|
$2.8250 / $7.0000 | Buy Now |
|
DISTI #
584-LTC2858IMS-1#PBF
|
Mouser Electronics | RS-422/RS-485 Interface IC 20Mbps & SR Limed 15kV RS485/RS422 Tran RoHS: Compliant | 82 |
|
$2.9600 / $5.4700 | Buy Now |
|
|
Analog Devices Inc | 20Mbps & SR Limed 15kV RS485/R Package Multiple: 50 | 1964 |
|
$2.2600 / $7.0000 | Buy Now |
|
DISTI #
35212975
|
Verical | Single Transmitter/Receiver RS-422/RS-485 10-Pin MSOP Tube RoHS: Compliant Min Qty: 200 Package Multiple: 200 | Americas - 1800 |
|
$2.8428 | Buy Now |
|
DISTI #
LTC2858IMS-1PBF
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 200 | 0 |
|
$2.9200 / $3.2000 | Buy Now |
Part Details for LTC2858IMS-1#PBF
LTC2858IMS-1#PBF CAD Models
LTC2858IMS-1#PBF Part Data Attributes
|
|
LTC2858IMS-1#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2858IMS-1#PBF
Analog Devices Inc
20Mbps and Slew Rate Limited 15kV RS485/RS422 Transceiver
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | LEAD FREE, PLASTIC, MSOP-10 | |
| Pin Count | 10 | |
| Manufacturer Package Code | 05-08-1661 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-485-A; TIA-485-A | |
| JESD-30 Code | S-PDSO-G10 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 10 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 70 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.1 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 50 ns | |
| Width | 3 mm |
Alternate Parts for LTC2858IMS-1#PBF
This table gives cross-reference parts and alternative options found for LTC2858IMS-1#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2858IMS-1#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2858IMS-1#TRPBF | Analog Devices Inc | $3.2530 | 20Mbps and Slew Rate Limited 15kV RS485/RS422 Transceiver | LTC2858IMS-1#PBF vs LTC2858IMS-1#TRPBF |
| LTC2858IMS-1 | Analog Devices Inc | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10 | LTC2858IMS-1#PBF vs LTC2858IMS-1 |
| LTC2858IMS-1 | Linear Technology | Check for Price | IC LINE TRANSCEIVER, PDSO10, PLASTIC, MSOP-10, Line Driver or Receiver | LTC2858IMS-1#PBF vs LTC2858IMS-1 |
| LTC2858IMS-1#PBF | Linear Technology | Check for Price | LTC2858 - 20Mbps and Slew Rate Limited 15kV RS485/RS422 Transceiver; Package: MSOP; Pins: 10; Temperature Range: -40°C to 85°C | LTC2858IMS-1#PBF vs LTC2858IMS-1#PBF |
| LTC2858IMS-1#TRPBF | Linear Technology | Check for Price | LTC2858 - 20Mbps and Slew Rate Limited 15kV RS485/RS422 Transceiver; Package: MSOP; Pins: 10; Temperature Range: -40°C to 85°C | LTC2858IMS-1#PBF vs LTC2858IMS-1#TRPBF |
| LTC2858IMS-1#TR | Linear Technology | Check for Price | IC LINE TRANSCEIVER, PDSO10, PLASTIC, MSOP-10, Line Driver or Receiver | LTC2858IMS-1#PBF vs LTC2858IMS-1#TR |
LTC2858IMS-1#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2858IMS-1#PBF involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
The LTC2858IMS-1#PBF requires a single 3.3V or 5V power supply. It's recommended to power the device with a low-noise, low-dropout regulator. The power sequencing requirement is to power up the device after the power supply has stabilized, and to ensure that the power supply is within the recommended operating range.
-
The LTC2858IMS-1#PBF has a maximum junction temperature of 150°C. To prevent overheating, ensure good airflow around the device, use a heat sink if necessary, and avoid blocking the airflow around the device. Also, ensure that the device is operated within the recommended operating temperature range.
-
To troubleshoot issues with the LTC2858IMS-1#PBF, start by checking the power supply and ensuring that it's within the recommended operating range. Check for proper PCB layout and routing, and ensure that the device is properly grounded. Common pitfalls to avoid include not following the recommended PCB layout, not using a low-noise power supply, and not ensuring proper grounding.
-
The LTC2858IMS-1#PBF is designed to meet the EMI and RFI requirements of various regulatory bodies. To ensure compliance, follow proper PCB layout and routing guidelines, use shielding and filtering as necessary, and ensure that the device is operated within the recommended operating range.