Part Details for LTC2852MPS#TRPBF by Analog Devices Inc
Results Overview of LTC2852MPS#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC2852MPS#TRPBF Information
LTC2852MPS#TRPBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC2852MPS#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC2852MPS#TRPBF-ND
|
DigiKey | IC TRANSCEIVER FULL 1/1 14SO Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$6.9250 | Buy Now |
|
DISTI #
584-LTC2852MPS#TRPBF
|
Mouser Electronics | RS-422/RS-485 Interface IC 3.3V 20Mbps RS485/RS422 Tran RoHS: Compliant | 0 |
|
$6.9200 | Order Now |
|
|
Analog Devices Inc | 3.3V 20Mbps RS485/RS422 Tran Min Qty: 2500 Package Multiple: 2500 | 0 |
|
$5.5400 / $7.8100 | Buy Now |
|
DISTI #
LTC2852MPSTRPBF
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 2500 | 0 |
|
$7.1500 / $7.4400 | Buy Now |
|
|
Vyrian | Peripheral ICs | 1079 |
|
RFQ |
Part Details for LTC2852MPS#TRPBF
LTC2852MPS#TRPBF CAD Models
LTC2852MPS#TRPBF Part Data Attributes
|
|
LTC2852MPS#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2852MPS#TRPBF
Analog Devices Inc
3.3V 20Mbps RS485/RS422 Transceiver
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.150 INCH, LEAD FREE, PLASTIC, SOP-14 | |
| Pin Count | 14 | |
| Manufacturer Package Code | 05-08-1610 (S14) | |
| Reach Compliance Code | compliant | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-485-A; TIA-485-A; EIA-422 | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e3 | |
| Length | 8.649 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 70 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.752 mm | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | MILITARY | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 50 ns | |
| Width | 3.899 mm |
Alternate Parts for LTC2852MPS#TRPBF
This table gives cross-reference parts and alternative options found for LTC2852MPS#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2852MPS#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2852MPS#TRPBF | Linear Technology | Check for Price | LTC2852 - 3.3V 20Mbps RS485/RS422 Transceiver; Package: SO; Pins: 14; Temperature Range: -55°C to 125°C | LTC2852MPS#TRPBF vs LTC2852MPS#TRPBF |
| LTC2852CS | Linear Technology | Check for Price | IC LINE TRANSCEIVER, PDSO14, 0.150 INCH, PLASTIC, SOP-14, Line Driver or Receiver | LTC2852MPS#TRPBF vs LTC2852CS |
LTC2852MPS#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2852MPS involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the datasheet provides a recommended PCB layout and land pattern that should be followed.
-
The LTC2852MPS has a specific power-up and power-down sequence that must be followed to ensure proper operation. The datasheet recommends powering up the VCC pin first, followed by the VDD pin, and then the EN pin. When powering down, the EN pin should be turned off first, followed by the VDD pin, and then the VCC pin. Additionally, the power supply should be ramped up and down slowly to prevent damage to the IC.
-
The LTC2852MPS has an operating temperature range of -40°C to 125°C. However, the IC's performance may degrade at temperatures above 85°C, and the maximum junction temperature should not exceed 150°C. It's recommended to use thermal management techniques such as heat sinks or thermal pads to keep the IC within its operating temperature range.
-
To troubleshoot issues with the LTC2852MPS, start by checking the power supply and ensuring that the IC is properly powered up and powered down. Verify that the clock and data lines are properly connected and that the IC is properly configured. Use a logic analyzer or oscilloscope to monitor the IC's signals and identify any errors or anomalies. Consult the datasheet and application notes for troubleshooting guides and FAQs.
-
The LTC2852MPS is a surface-mount device and can be susceptible to vibration and shock. However, it's designed to meet the requirements of various industrial and automotive standards. To ensure reliable operation in high-vibration or high-shock environments, it's recommended to use a robust PCB design, secure the IC to the PCB using a suitable adhesive or mechanical fastening, and consider using a conformal coating to protect the IC from environmental factors.