Part Details for LTC2804IGN-1#PBF by Analog Devices Inc
Results Overview of LTC2804IGN-1#PBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Aerospace and Defense
Agriculture Technology
Robotics and Drones
LTC2804IGN-1#PBF Information
LTC2804IGN-1#PBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC2804IGN-1#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
50AK2524
|
Newark | Rs232 Transceiver, -40 To 85Deg C, Ic Type:Rs232 Transceiver, No. Of Receivers:2Receivers, No. Of Transmitters:2, Communication Mode:-, Data Rate Max:1Mbps, Supply Voltage Min:1.8V, Supply Voltage Max:5.5V, Ic Case/Package:Nssop Rohs Compliant: Yes |Analog Devices LTC2804IGN-1#PBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 125 |
|
$3.5500 / $7.7700 | Buy Now |
|
DISTI #
LTC2804IGN-1#PBF-ND
|
DigiKey | IC TRANSCEIVER HALF 2/2 16SSOP Min Qty: 1 Lead time: 10 Weeks Container: Tube |
697 In Stock |
|
$3.5500 / $8.2800 | Buy Now |
|
DISTI #
584-LTC2804IGN-1#PBF
|
Mouser Electronics | RS-232 Interface IC 1.8V to 5.5V RS-232 1x & 2x Trans RoHS: Compliant | 1429 |
|
$4.0200 / $6.7100 | Buy Now |
|
|
Analog Devices Inc | 1.8V to 5.5V RS-232 1x & 2x Tr Package Multiple: 100 | 840 |
|
$2.8400 / $8.2800 | Buy Now |
|
DISTI #
LTC2804IGN-1PBF
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 100 | 0 |
|
$3.6600 / $4.0200 | Buy Now |
Part Details for LTC2804IGN-1#PBF
LTC2804IGN-1#PBF CAD Models
LTC2804IGN-1#PBF Part Data Attributes
|
|
LTC2804IGN-1#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2804IGN-1#PBF
Analog Devices Inc
1.8V to 5.5V RS-232 Single and Dual Transceivers
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.150 INCH, LEAD FREE, PLASTIC, SSOP-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 05-08-1641 (GN16) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | NO | |
| Driver Number of Bits | 2 | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232-F; TIA-232-F | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 4.8895 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Equivalence Code | SSOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 400 ns | |
| Receiver Number of Bits | 2 | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 1.8 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 500 ns | |
| Width | 3.899 mm |
Alternate Parts for LTC2804IGN-1#PBF
This table gives cross-reference parts and alternative options found for LTC2804IGN-1#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2804IGN-1#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2804IGN-1#TRPBF | Analog Devices Inc | $4.0352 | 1.8V to 5.5V RS-232 Single and Dual Transceivers | LTC2804IGN-1#PBF vs LTC2804IGN-1#TRPBF |
| LTC2804CGN-1#TRPBF | Analog Devices Inc | Check for Price | 1.8V to 5.5V RS-232 Single and Dual Transceivers | LTC2804IGN-1#PBF vs LTC2804CGN-1#TRPBF |
| LTC2804CGN-1#TRPBF | Linear Technology | Check for Price | LTC2804 - 1.8V to 5.5V RS-232 Single and Dual Transceivers; Package: SSOP; Pins: 16; Temperature Range: 0°C to 70°C | LTC2804IGN-1#PBF vs LTC2804CGN-1#TRPBF |
| LTC2804IGN-1 | Linear Technology | Check for Price | LTC2804 - 1.8V to 5.5V RS-232 Single and Dual Transceivers; Package: SSOP; Pins: 16; Temperature Range: -40°C to 85°C | LTC2804IGN-1#PBF vs LTC2804IGN-1 |
| LTC2804CGN-1#PBF | Linear Technology | Check for Price | LTC2804 - 1.8V to 5.5V RS-232 Single and Dual Transceivers; Package: SSOP; Pins: 16; Temperature Range: 0°C to 70°C | LTC2804IGN-1#PBF vs LTC2804CGN-1#PBF |
LTC2804IGN-1#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2804IGN-1#PBF involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and ensure optimal performance.
-
The LTC2804IGN-1#PBF requires a single 2.7V to 5.5V power supply. It's recommended to power the device with a clean, low-noise power supply, and to ensure that the power supply is stable before applying signals to the device. The power sequencing requirements are not critical, but it's recommended to power the device after the power supply has stabilized.
-
The LTC2804IGN-1#PBF has a maximum data transfer rate of 100kbps. This means that the system design should ensure that the data transmission rate is within this limit to avoid data corruption or loss. Additionally, the system design should also consider the clock frequency and the number of devices on the bus to ensure reliable data transfer.
-
To troubleshoot issues with the LTC2804IGN-1#PBF, start by checking the power supply and ensuring that it's within the recommended range. Then, verify that the device is properly configured and that the communication protocol is correct. Use a logic analyzer or oscilloscope to debug the communication signals and identify any errors. If the issue persists, consult the datasheet and application notes for further guidance.
-
The LTC2804IGN-1#PBF has a maximum junction temperature of 150°C. To ensure reliable operation in high-temperature environments, it's recommended to provide adequate heat sinking, use a thermally conductive PCB material, and ensure good airflow around the device. Additionally, consider using thermal interface materials and heat sinks to reduce the thermal resistance.