Part Details for LTC2804CGN-1#TRPBF by Analog Devices Inc
Results Overview of LTC2804CGN-1#TRPBF by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Aerospace and Defense
Agriculture Technology
Robotics and Drones
LTC2804CGN-1#TRPBF Information
LTC2804CGN-1#TRPBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC2804CGN-1#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC2804CGN-1#TRPBFCT-ND
|
DigiKey | IC TRANSCEIVER HALF 2/2 16SSOP Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
2936 In Stock |
|
$2.9500 / $7.2300 | Buy Now |
|
DISTI #
584-C2804CGN-1TRPBF
|
Mouser Electronics | RS-232 Interface IC 1.8V to 5.5V RS-232 1x & 2x Trans RoHS: Compliant | 2128 |
|
$3.0600 / $5.6800 | Buy Now |
|
|
Analog Devices Inc | 1.8V to 5.5V RS-232 1x & 2x Tr Min Qty: 1 Package Multiple: 2500 | 10588 |
|
$2.3600 / $7.2300 | Buy Now |
|
DISTI #
LTC2804CGN-1TRP
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 2500 | 0 |
|
$3.0500 / $3.1700 | Buy Now |
Part Details for LTC2804CGN-1#TRPBF
LTC2804CGN-1#TRPBF CAD Models
LTC2804CGN-1#TRPBF Part Data Attributes
|
|
LTC2804CGN-1#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2804CGN-1#TRPBF
Analog Devices Inc
1.8V to 5.5V RS-232 Single and Dual Transceivers
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.150 INCH, LEAD FREE, PLASTIC, SSOP-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 05-08-1641 (GN16) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Differential Output | NO | |
| Driver Number of Bits | 2 | |
| Input Characteristics | SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-232-F; TIA-232-F | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 4.8895 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Equivalence Code | SSOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 400 ns | |
| Receiver Number of Bits | 2 | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 1.8 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 500 ns | |
| Width | 3.899 mm |
Alternate Parts for LTC2804CGN-1#TRPBF
This table gives cross-reference parts and alternative options found for LTC2804CGN-1#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2804CGN-1#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2804CGN-1#PBF | Analog Devices Inc | $2.4183 | 1.8V to 5.5V RS-232 Single and Dual Transceivers | LTC2804CGN-1#TRPBF vs LTC2804CGN-1#PBF |
| LTC2804IGN-1#PBF | Analog Devices Inc | $4.0330 | 1.8V to 5.5V RS-232 Single and Dual Transceivers | LTC2804CGN-1#TRPBF vs LTC2804IGN-1#PBF |
| LTC2804IGN-1#TRPBF | Analog Devices Inc | $4.0352 | 1.8V to 5.5V RS-232 Single and Dual Transceivers | LTC2804CGN-1#TRPBF vs LTC2804IGN-1#TRPBF |
| LTC2804IGN-1 | Linear Technology | Check for Price | LTC2804 - 1.8V to 5.5V RS-232 Single and Dual Transceivers; Package: SSOP; Pins: 16; Temperature Range: -40°C to 85°C | LTC2804CGN-1#TRPBF vs LTC2804IGN-1 |
| LTC2804IGN-1#PBF | Linear Technology | Check for Price | LTC2804 - 1.8V to 5.5V RS-232 Single and Dual Transceivers; Package: SSOP; Pins: 16; Temperature Range: -40°C to 85°C | LTC2804CGN-1#TRPBF vs LTC2804IGN-1#PBF |
| LTC2804IGN-1 | Analog Devices Inc | Check for Price | Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, PDSO16 | LTC2804CGN-1#TRPBF vs LTC2804IGN-1 |
LTC2804CGN-1#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2804CGN-1 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. A 4-layer PCB with a dedicated ground plane is recommended.
-
To ensure proper power-up and power-down of the LTC2804CGN-1, make sure to follow the recommended power-up sequence, which is to apply VCC first, followed by VIO. During power-down, remove VIO first, followed by VCC. Also, ensure that the input voltage ramps up and down slowly to prevent damage to the IC.
-
The maximum allowed capacitance for the bypass capacitors on the VCC and VIO pins is 10uF. Exceeding this value may cause instability or oscillations in the IC.
-
To handle thermal considerations for the LTC2804CGN-1, ensure good airflow around the IC, use a heat sink if necessary, and avoid blocking the airflow around the IC. Also, follow the recommended thermal design guidelines to prevent overheating.
-
To protect the LTC2804CGN-1 from electrostatic discharge (ESD), use ESD protection devices such as TVS diodes or ESD arrays on the input and output pins. Follow the recommended ESD protection guidelines to prevent damage to the IC.