Part Details for LTC2484IDD#TRPBF by Linear Technology
Results Overview of LTC2484IDD#TRPBF by Linear Technology
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC2484IDD#TRPBF Information
LTC2484IDD#TRPBF by Linear Technology is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for LTC2484IDD#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Converters | 1022 |
|
RFQ | |
|
|
Win Source Electronics | IC ADC 24BIT 10-DFN / 1-Channel Single ADC Delta-Sigma 15sps 24-bit Serial Automotive 10-Pin DFN EP T/R | 12224 |
|
$6.3361 / $8.1840 | Buy Now |
Part Details for LTC2484IDD#TRPBF
LTC2484IDD#TRPBF CAD Models
LTC2484IDD#TRPBF Part Data Attributes
|
|
LTC2484IDD#TRPBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC2484IDD#TRPBF
Linear Technology
LTC2484 - 24-Bit ΔΣ ADC with Easy Drive Input Current Cancellation; Package: DFN; Pins: 10; Temperature Range: -40°C to 85°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | DFN | |
| Package Description | 3 X 3 MM, LEAD FREE, PLASTIC, MO-229WEED-2, DFN-10 | |
| Pin Count | 10 | |
| Manufacturer Package Code | DD | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Analog Input Voltage-Max | 5.5 V | |
| Analog Input Voltage-Min | ||
| Conversion Time-Max | 163500 µs | |
| Converter Type | ADC, DELTA-SIGMA | |
| JESD-30 Code | S-PDSO-N10 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Linearity Error-Max (EL) | 0.001% | |
| Moisture Sensitivity Level | 1 | |
| Number of Analog In Channels | 1 | |
| Number of Bits | 24 | |
| Number of Functions | 1 | |
| Number of Terminals | 10 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Bit Code | BINARY | |
| Output Format | SERIAL | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Equivalence Code | SOLCC10,.12,20 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 0.0000075 MHz | |
| Seated Height-Max | 0.8 mm | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3 mm |
Alternate Parts for LTC2484IDD#TRPBF
This table gives cross-reference parts and alternative options found for LTC2484IDD#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2484IDD#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2484IDD#TRPBF | Analog Devices Inc | $5.6881 | 24-Bit ΔΣ ADC with Easy Drive Input Current Cancellation | LTC2484IDD#TRPBF vs LTC2484IDD#TRPBF |
LTC2484IDD#TRPBF Frequently Asked Questions (FAQ)
-
The datasheet provides some general guidelines, but a good rule of thumb is to keep the analog and digital grounds separate, use a solid ground plane, and place the device close to the analog signal sources. Additionally, use short traces and avoid running digital signals near the analog inputs.
-
The high impedance of the analog inputs requires careful attention to input filtering and protection. Use a low-pass filter with a low impedance output to drive the inputs, and consider adding protection diodes or resistors to prevent overvoltage or ESD damage.
-
Temperature affects the gain and offset of the device, but the datasheet provides temperature coefficients for these effects. You can use these coefficients to develop a temperature compensation scheme, such as using an external temperature sensor and adjusting the gain and offset accordingly.
-
Calibration is critical for accurate readings. Follow the datasheet's calibration procedure, and consider using an external calibration source or a calibration routine in your firmware. Calibration errors can result in offset or gain errors, which can be compensated for using external trim resistors or software corrections.
-
The datasheet specifies the power sequencing and supply voltage requirements. Ensure that the analog and digital supplies are powered up and down in the correct sequence, and use a low-dropout regulator or a high-PSRR regulator to maintain a stable supply voltage.