Part Details for LTC2293CUP#PBF by Analog Devices Inc
Results Overview of LTC2293CUP#PBF by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LTC2293CUP#PBF Information
LTC2293CUP#PBF by Analog Devices Inc is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for LTC2293CUP#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-LTC2293CUP#PBF-ND
|
DigiKey | IC ADC 12BIT PIPELINED 64QFN Min Qty: 1 Lead time: 13 Weeks Container: Tube |
108 In Stock |
|
$32.1625 / $44.8900 | Buy Now |
|
DISTI #
584-LTC2293CUP#PBF
|
Mouser Electronics | Analog to Digital Converters - ADC 2x 12-B, 65Msps L Pwr 3V ADCs RoHS: Compliant | 40 |
|
$32.2200 / $44.8900 | Buy Now |
|
|
Analog Devices Inc | 2x 12-B, 65Msps L Pwr 3V ADCs Package Multiple: 40 | 462 |
|
$25.7300 / $44.8900 | Buy Now |
|
DISTI #
LTC2293CUP#PBF
|
Richardson RFPD | CONVERTER - ADC RoHS: Compliant Min Qty: 40 | 0 |
|
$33.2200 / $38.6000 | Buy Now |
Part Details for LTC2293CUP#PBF
LTC2293CUP#PBF CAD Models
LTC2293CUP#PBF Part Data Attributes
|
|
LTC2293CUP#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC2293CUP#PBF
Analog Devices Inc
Dual 12-Bit, 65Msps Low Power 3V ADCs
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Pin Count | 64 | |
| Manufacturer Package Code | 05-08-1705 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Analog Input Voltage-Max | 1 V | |
| Analog Input Voltage-Min | -0.5 V | |
| Converter Type | ADC, PIPELINED | |
| JESD-30 Code | S-PQCC-N64 | |
| JESD-609 Code | e3 | |
| Length | 9 mm | |
| Linearity Error-Max (EL) | 0.0342% | |
| Moisture Sensitivity Level | 1 | |
| Number of Analog In Channels | 1 | |
| Number of Bits | 12 | |
| Number of Functions | 2 | |
| Number of Terminals | 64 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY | |
| Output Format | PARALLEL, WORD | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC64,.35SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 65 MHz | |
| Sample and Hold / Track and Hold | SAMPLE | |
| Seated Height-Max | 0.8 mm | |
| Supply Voltage-Nom | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 9 mm |
Alternate Parts for LTC2293CUP#PBF
This table gives cross-reference parts and alternative options found for LTC2293CUP#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2293CUP#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2293IUP#TRPBF | Analog Devices Inc | Check for Price | Dual 12-Bit, 65Msps Low Power 3V ADCs | LTC2293CUP#PBF vs LTC2293IUP#TRPBF |
| LTC2293IUP | Analog Devices Inc | Check for Price | ADC, Proprietary Method, 12-Bit, 2 Func, 1 Channel, Parallel, Word Access, CMOS, PQCC64 | LTC2293CUP#PBF vs LTC2293IUP |
LTC2293CUP#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC2293 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the analog signal traces. Additionally, it's recommended to place the device close to the analog signal sources and to use a low-ESR capacitor for the VCC bypass.
-
To ensure proper power-up and configuration, make sure to follow the recommended power-up sequence, which is to apply VCC before applying the analog input signal. Also, ensure that the device is properly configured by setting the correct gain and offset settings, and that the input signal is within the recommended range.
-
The LTC2293 has a maximum junction temperature of 150°C. To ensure reliable operation, it's recommended to keep the device within a temperature range of -40°C to 85°C. Additionally, ensure good airflow around the device and avoid blocking the thermal pad on the underside of the package.
-
Common issues with the LTC2293 include incorrect gain or offset settings, noise or oscillations in the output signal, and incorrect power-up sequencing. To troubleshoot, check the device configuration, ensure proper power-up sequencing, and verify that the input signal is within the recommended range. Also, check for noise or oscillations in the output signal and ensure that the device is properly bypassed.
-
To minimize EMI and RFI, ensure that the device is properly shielded, and that the PCB layout is designed to minimize radiation. Additionally, use a low-pass filter on the output signal to reduce high-frequency noise, and consider using a shielded enclosure for the device.