Part Details for LTC2054IS5#PBF by Linear Technology
Results Overview of LTC2054IS5#PBF by Linear Technology
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Energy and Power Systems
Healthcare
Renewable Energy
Telecommunications
Medical Imaging
Automotive
LTC2054IS5#PBF Information
LTC2054IS5#PBF by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LTC2054IS5#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 872 |
|
RFQ |
Part Details for LTC2054IS5#PBF
LTC2054IS5#PBF CAD Models
LTC2054IS5#PBF Part Data Attributes
|
|
LTC2054IS5#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC2054IS5#PBF
Linear Technology
LTC2054 - Single Micropower Zero-Drift Operational Amplifiers; Package: SOT; Pins: 5; Temperature Range: -40°C to 85°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOT | |
| Package Description | VSSOP, TSOP5/6,.11,37 | |
| Pin Count | 5 | |
| Manufacturer Package Code | S5 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.00015 µA | |
| Common-mode Reject Ratio-Min | 115 dB | |
| Common-mode Reject Ratio-Nom | 130 dB | |
| Input Offset Current-Max (IIO) | 0.0003 µA | |
| Input Offset Voltage-Max | 3 µV | |
| JESD-30 Code | R-PDSO-G5 | |
| JESD-609 Code | e3 | |
| Length | 2.9 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VSSOP | |
| Package Equivalence Code | TSOP5/6,.11,37 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1 mm | |
| Slew Rate-Nom | 0.5 V/us | |
| Supply Current-Max | 0.175 mA | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.95 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 500 | |
| Voltage Gain-Min | 120 | |
| Width | 1.62 mm |
Alternate Parts for LTC2054IS5#PBF
This table gives cross-reference parts and alternative options found for LTC2054IS5#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC2054IS5#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC2054IS5#TRPBF | Linear Technology | Check for Price | LTC2054 - Single Micropower Zero-Drift Operational Amplifiers; Package: SOT; Pins: 5; Temperature Range: -40°C to 85°C | LTC2054IS5#PBF vs LTC2054IS5#TRPBF |
| LTC2054CS5#TRM | Linear Technology | Check for Price | LTC2054 - Single Micropower Zero-Drift Operational Amplifiers; Package: SOT; Pins: 5; Temperature Range: 0°C to 70°C | LTC2054IS5#PBF vs LTC2054CS5#TRM |
LTC2054IS5#PBF Frequently Asked Questions (FAQ)
-
The datasheet provides some general guidelines, but a good rule of thumb is to keep the input and output traces short and away from each other, use a solid ground plane, and place the device close to the analog-to-digital converter (ADC) or digital-to-analog converter (DAC) it's connected to. Additionally, consider using a four-layer PCB with a dedicated analog ground layer to reduce noise and crosstalk.
-
The datasheet provides a typical application circuit, but you may need to adjust the biasing and configuration based on your specific requirements. Consult the datasheet's 'Application Information' section and consider factors such as the input signal range, output voltage, and power supply voltage. You may also need to add external components, such as resistors or capacitors, to optimize performance.
-
The datasheet specifies an operating temperature range of -40°C to 125°C, but the device's performance may degrade at extreme temperatures. Be aware that the amplifier's gain, bandwidth, and noise figure may vary with temperature, and consider derating the device's performance accordingly. Consult the datasheet's 'Electrical Characteristics' section for more information.
-
Common issues with the LTC2054IS5#PBF can often be attributed to poor layout, inadequate power supply decoupling, or incorrect biasing. Check the datasheet's 'Troubleshooting' section for guidance, and consider using simulation tools or Spice models to analyze and debug your design. Additionally, consult Linear Technology's application notes and technical support resources for further assistance.
-
Yes, the LTC2054IS5#PBF is a high-frequency device and can be susceptible to electromagnetic interference (EMI). Take steps to minimize EMI by using a solid ground plane, keeping sensitive traces short, and using shielding or filtering where necessary. Consult the datasheet's 'Electromagnetic Compatibility' section and relevant industry standards (e.g., CISPR 22) for more information.