-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Differential Bus Transceiver
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC1485CS8#TRPBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
50AK2058
|
Newark | Rs422/Rs485 Diff Transceiver, 70Deg C, Ic Type:Rs422/Rs485 Transceiver, No. Of Receivers:1Receivers, No. Of Transmitters:1, Communication Mode:Half Duplex, Data Rate Max:10Mbps, Supply Voltage Min:4.75V, Supply Voltage Max:5.25V Rohs Compliant: Yes |Analog Devices LTC1485CS8#TRPBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 0 Container: Cut Tape | 6756 |
|
$3.4400 / $5.0800 | Buy Now |
DISTI #
505-LTC1485CS8#TRPBFCT-ND
|
DigiKey | IC TRANSCEIVER HALF 1/1 8SO Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
3796 In Stock |
|
$3.4375 / $8.0900 | Buy Now |
DISTI #
584-LTC1485CS8#TRPBF
|
Mouser Electronics | RS-485 Interface IC Diff Bus Tran RoHS: Compliant | 5547 |
|
$3.4400 / $6.5200 | Buy Now |
|
Analog Devices Inc | Diff Bus Tran Min Qty: 1 Package Multiple: 2500 | 760 |
|
$2.7500 / $8.0900 | Buy Now |
DISTI #
LTC1485CS8TRPBF
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 2500 | 0 |
|
$3.5500 / $3.6900 | Buy Now |
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
|
LTC1485CS8#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1485CS8#TRPBF
Analog Devices Inc
Differential Bus Transceiver
|
Pbfree Code | No | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | ANALOG DEVICES INC | |
Package Description | LEAD FREE, SOP-8 | |
Pin Count | 8 | |
Manufacturer Package Code | 05-08-1610 (S8) | |
Reach Compliance Code | compliant | |
Samacsys Manufacturer | Analog Devices | |
Additional Feature | COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN | |
Differential Output | YES | |
Driver Number of Bits | 1 | |
Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
Interface IC Type | LINE TRANSCEIVER | |
Interface Standard | EIA-422; EIA-485 | |
JESD-30 Code | R-PDSO-G8 | |
JESD-609 Code | e3 | |
Length | 4.9025 mm | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 1 | |
Number of Terminals | 8 | |
Operating Temperature-Max | 70 °C | |
Operating Temperature-Min | ||
Output Characteristics | 3-STATE | |
Output Polarity | COMPLEMENTARY | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SOP | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE | |
Peak Reflow Temperature (Cel) | 260 | |
Qualification Status | Not Qualified | |
Receive Delay-Max | 55 ns | |
Receiver Number of Bits | 1 | |
Seated Height-Max | 1.752 mm | |
Supply Voltage-Max | 5.25 V | |
Supply Voltage-Min | 4.75 V | |
Supply Voltage-Nom | 5 V | |
Surface Mount | YES | |
Technology | BICMOS | |
Temperature Grade | COMMERCIAL | |
Terminal Finish | Matte Tin (Sn) | |
Terminal Form | GULL WING | |
Terminal Pitch | 1.27 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Transmit Delay-Max | 50 ns | |
Width | 3.899 mm |
This table gives cross-reference parts and alternative options found for LTC1485CS8#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1485CS8#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
TL3695DR | Texas Instruments | $1.0193 | Differential Bus Transceiver 8-SOIC 0 to 70 | LTC1485CS8#TRPBF vs TL3695DR |
MAX485CSA+T | Analog Devices Inc | $1.4381 | Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | LTC1485CS8#TRPBF vs MAX485CSA+T |
ADM485JRZ | Analog Devices Inc | $1.7449 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | LTC1485CS8#TRPBF vs ADM485JRZ |
ADM485JRZ-REEL | Analog Devices Inc | $2.4275 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | LTC1485CS8#TRPBF vs ADM485JRZ-REEL |
MAX1487ECSA+ | Analog Devices Inc | $3.1404 | ±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | LTC1485CS8#TRPBF vs MAX1487ECSA+ |
ADM1485ARZ | Analog Devices Inc | $3.2751 | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | LTC1485CS8#TRPBF vs ADM1485ARZ |
MAX485EESA | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, 0.150 INCH, MS-012A, SOIC-8 | LTC1485CS8#TRPBF vs MAX485EESA |
MAX485CSA-T | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, SOIC-8 | LTC1485CS8#TRPBF vs MAX485CSA-T |
LTC485IS8 | Analog Devices Inc | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 | LTC1485CS8#TRPBF vs LTC485IS8 |
LTC1485CS8#TR | Analog Devices Inc | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 | LTC1485CS8#TRPBF vs LTC1485CS8#TR |
A good PCB layout for the LTC1485CS8 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the IC and the external components. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure the LTC1485CS8 operates within its specified temperature range, make sure to provide adequate heat sinking, avoid overheating, and keep the device away from high-temperature sources. Also, consider using a thermal interface material to improve heat transfer between the device and the heat sink.
Not using the recommended bypass capacitors can lead to instability, oscillations, and reduced performance of the LTC1485CS8. The bypass capacitors help to filter out noise and ensure a stable power supply to the device.
Yes, the LTC1485CS8 is suitable for high-reliability and high-availability applications. However, it's essential to follow proper design and manufacturing practices, including using a robust PCB design, selecting high-quality components, and implementing adequate testing and validation procedures.
To troubleshoot issues with the LTC1485CS8, start by checking the power supply, ensuring that the input voltage is within the specified range. Then, verify that the device is properly configured and that the external components are correctly connected. Use an oscilloscope to check the output waveforms and identify any anomalies.