Part Details for LTC1483IS8#TRPBF by Analog Devices Inc
Results Overview of LTC1483IS8#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (10 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC1483IS8#TRPBF Information
LTC1483IS8#TRPBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC1483IS8#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-LTC1483IS8#TRPBFCT-ND
|
DigiKey | IC TRANSCEIVER HALF 1/1 8SO Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
1919 In Stock |
|
$4.4375 / $9.7700 | Buy Now |
|
DISTI #
584-LTC1483IS8#TRPBF
|
Mouser Electronics | RS-485 Interface IC Ultra-L Pwr RS485 L EMI Tran w/ SD RoHS: Compliant | 2472 |
|
$4.5300 / $8.2200 | Buy Now |
|
|
Analog Devices Inc | Ultra-L Pwr RS485 L EMI Tran w Min Qty: 1 Package Multiple: 2500 | 2884 |
|
$3.5500 / $9.7700 | Buy Now |
|
|
Rochester Electronics | LTC1483 - Ultra-Low Power RS485 Low EMI Transceiver with Shutdown RoHS: Compliant Status: Active Min Qty: 1 | 2270 |
|
$3.7400 / $4.6700 | Buy Now |
|
DISTI #
LTC1483IS8TRPBF
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 2500 | 0 |
|
$4.5800 / $4.7600 | Buy Now |
Part Details for LTC1483IS8#TRPBF
LTC1483IS8#TRPBF CAD Models
LTC1483IS8#TRPBF Part Data Attributes
|
|
LTC1483IS8#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1483IS8#TRPBF
Analog Devices Inc
Ultra-Low Power RS485 Low EMI Transceiver with Shutdown
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | LEAD FREE, SOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 05-08-1610 (S8) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-422; EIA-485 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | 3-STATE | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 200 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 1200 ns | |
| Width | 3.9 mm |
Alternate Parts for LTC1483IS8#TRPBF
This table gives cross-reference parts and alternative options found for LTC1483IS8#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1483IS8#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX487CSA+ | Analog Devices Inc | $2.6178 | Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | LTC1483IS8#TRPBF vs MAX487CSA+ |
| LTC1483IS8#PBF | Analog Devices Inc | $5.2955 | Ultra-Low Power RS485 Low EMI Transceiver with Shutdown | LTC1483IS8#TRPBF vs LTC1483IS8#PBF |
| ADM483JRZ | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Half Duplex RS-485/RS-422 Transceiver | LTC1483IS8#TRPBF vs ADM483JRZ |
| LTC1483IS8#PBF | Linear Technology | Check for Price | LTC1483 - Ultra-Low Power RS485 Low EMI Transceiver with Shutdown; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C | LTC1483IS8#TRPBF vs LTC1483IS8#PBF |
| SP483ECN | Sipex Corporation | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8, SOIC-8 | LTC1483IS8#TRPBF vs SP483ECN |
| ADM483JR-REEL | Analog Devices Inc | Check for Price | LINE TRANSCEIVER, PDSO8, MS-012AA, SOIC-8 | LTC1483IS8#TRPBF vs ADM483JR-REEL |
| ISL8487EIB-T | Intersil Corporation | Check for Price | LINE TRANSCEIVER, PDSO8, PLASTIC, MS-012AA, SOIC-8 | LTC1483IS8#TRPBF vs ISL8487EIB-T |
| ADM483JR-REEL7 | Analog Devices Inc | Check for Price | 5 V, Slew-Rate Limited, Low Power, 250 kbps, Half Duplex RS-485/RS-422 Transceiver | LTC1483IS8#TRPBF vs ADM483JR-REEL7 |
| LTC1483IS8#TRPBF | Linear Technology | Check for Price | LTC1483 - Ultra-Low Power RS485 Low EMI Transceiver with Shutdown; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C | LTC1483IS8#TRPBF vs LTC1483IS8#TRPBF |
| SP483ECN-L/TR | Sipex Corporation | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8, LEAD FREE, SOIC-8 | LTC1483IS8#TRPBF vs SP483ECN-L/TR |
LTC1483IS8#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC1483IS8 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the IC and the external components. A 4-layer PCB with a dedicated analog ground plane is recommended.
-
To ensure accurate ADC conversion results, it's essential to follow proper PCB layout guidelines, use a low-noise power supply, and minimize electromagnetic interference (EMI) in the system. Additionally, calibrate the ADC using the internal calibration feature or an external calibration signal.
-
The maximum clock frequency for the SPI interface of the LTC1483IS8 is 2.5 MHz. Exceeding this frequency may result in data corruption or errors.
-
Yes, the LTC1483IS8 can be used in a multi-channel data acquisition system. The IC has a built-in sequencer that allows it to scan multiple channels, and the SPI interface enables communication with a microcontroller or other digital systems.
-
The LTC1483IS8 has internal overvoltage protection up to ±16.5V. However, for inputs exceeding this range, external protection circuits such as voltage dividers or clamp circuits may be necessary to prevent damage to the IC.