Part Details for LTC1343CGW#TRPBF by Analog Devices Inc
Results Overview of LTC1343CGW#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
LTC1343CGW#TRPBF Information
LTC1343CGW#TRPBF by Analog Devices Inc is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for LTC1343CGW#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC1343CGW#TRPBF-ND
|
DigiKey | IC TRANSCEIVER FULL 4/4 44SSOP Min Qty: 1000 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$19.5375 | Buy Now |
|
DISTI #
584-LTC1343CGW#TRPBF
|
Mouser Electronics | RS-232 Interface IC Sftwr-Sel Multiprotocol Tran RoHS: Compliant | 0 |
|
$19.5300 | Order Now |
|
|
Analog Devices Inc | Sftwr-Sel Multiprotocol Tran Min Qty: 1000 Package Multiple: 1000 | 0 |
|
$19.2600 / $19.5375 | Buy Now |
|
DISTI #
LTC1343CGWTRPBF
|
Richardson RFPD | INTERFACE - TRANSCEIVER RoHS: Compliant Min Qty: 1000 | 0 |
|
$20.1800 / $20.9800 | Buy Now |
|
|
Vyrian | Peripheral ICs | 804 |
|
RFQ |
Part Details for LTC1343CGW#TRPBF
LTC1343CGW#TRPBF CAD Models
LTC1343CGW#TRPBF Part Data Attributes
|
|
LTC1343CGW#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1343CGW#TRPBF
Analog Devices Inc
Software-Selectable Multiprotocol Transceiver
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.300 INCH, PLASTIC, SSOP-44 | |
| Pin Count | 44 | |
| Manufacturer Package Code | 05-08-1642 (GW44) | |
| Reach Compliance Code | compliant | |
| Differential Output | YES | |
| Driver Number of Bits | 4 | |
| Input Characteristics | DIFFERENTIAL | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA232; V.35; V.36; X.21; EIA-449; EIA-530; EIA-530-A | |
| JESD-30 Code | R-PDSO-G44 | |
| JESD-609 Code | e3 | |
| Length | 17.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 4 | |
| Number of Terminals | 44 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Characteristics | TOTEM-POLE | |
| Output Polarity | COMPLEMENTARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Equivalence Code | SOP44,.4,32 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 800 ns | |
| Receiver Number of Bits | 4 | |
| Seated Height-Max | 2.641 mm | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.8 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Transmit Delay-Max | 2500 ns | |
| Width | 7.5 mm |
Alternate Parts for LTC1343CGW#TRPBF
This table gives cross-reference parts and alternative options found for LTC1343CGW#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1343CGW#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC1343CGW#TR | Analog Devices Inc | Check for Price | Line Transceiver, 1 Func, 4 Driver, 4 Rcvr, CMOS, PDSO44 | LTC1343CGW#TRPBF vs LTC1343CGW#TR |
LTC1343CGW#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC1343CGW involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing noise coupling between the analog and digital sections. A 4-layer PCB with a dedicated analog ground plane is recommended. Additionally, the datasheet provides a recommended PCB layout and land pattern that should be followed.
-
The LTC1343CGW requires a single 5V supply, and it's essential to ensure that the power supply is clean and well-regulated. A 0.1uF ceramic capacitor should be placed as close as possible to the VCC pin, and a 10uF tantalum capacitor can be added in parallel to filter out low-frequency noise. Additionally, the analog and digital grounds should be connected at a single point, preferably at the power supply.
-
The LTC1343CGW can operate at data rates up to 30Mbps, but the actual data rate achievable depends on the specific application, PCB layout, and noise environment. In general, it's recommended to operate the device at a data rate of 10Mbps or less to ensure reliable operation.
-
The LTC1343CGW has a maximum junction temperature of 150°C, and it's essential to ensure that the device does not exceed this temperature during operation. A thermal pad is provided on the package, and it should be connected to a solid ground plane to dissipate heat. Additionally, the device should be operated within the recommended operating temperature range of -40°C to 85°C.
-
The LTC1343CGW can operate with a clock frequency range of 1MHz to 30MHz, but the recommended clock frequency is 10MHz. A higher clock frequency can improve the device's noise immunity, but it may also increase power consumption.