Part Details for LTC1292CCN8#PBF by Analog Devices Inc
Results Overview of LTC1292CCN8#PBF by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LTC1292CCN8#PBF Information
LTC1292CCN8#PBF by Analog Devices Inc is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for LTC1292CCN8#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LTC1292CCN8#PBF-ND
|
DigiKey | IC DAS 12BIT 60K 8DIP Min Qty: 1 Lead time: 10 Weeks Container: Tube |
50 In Stock |
|
$24.7500 / $36.4500 | Buy Now |
|
DISTI #
584-LTC1292CCN8#PBF
|
Mouser Electronics | Analog to Digital Converters - ADC 1x Chip 12-B Data Acquisition Ss RoHS: Compliant | 38 |
|
$24.7400 / $36.4500 | Buy Now |
|
|
Analog Devices Inc | 1x Chip 12-B Data Acquisition Package Multiple: 50 | 160 |
|
$19.8000 / $36.4500 | Buy Now |
|
DISTI #
LTC1292CCN8#PBF
|
Richardson RFPD | CONVERTER - ADC RoHS: Compliant Min Qty: 50 | 0 |
|
$25.5600 / $29.7000 | Buy Now |
Part Details for LTC1292CCN8#PBF
LTC1292CCN8#PBF CAD Models
LTC1292CCN8#PBF Part Data Attributes
|
|
LTC1292CCN8#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1292CCN8#PBF
Analog Devices Inc
Single Chip 12-Bit Data Acquisition Systems
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.300 INCH, PLASTIC, DIP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 05-08-1510 (N8) | |
| Reach Compliance Code | compliant | |
| Analog Input Voltage-Max | 5.05 V | |
| Analog Input Voltage-Min | -0.05 V | |
| Conversion Time-Max | 12 µs | |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e3 | |
| Linearity Error-Max (EL) | 0.0122% | |
| Moisture Sensitivity Level | 1 | |
| Number of Analog In Channels | 1 | |
| Number of Bits | 12 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Bit Code | BINARY | |
| Output Format | SERIAL | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 0.06 MHz | |
| Sample and Hold / Track and Hold | SAMPLE | |
| Seated Height-Max | 3.937 mm | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 7.62 mm |
Alternate Parts for LTC1292CCN8#PBF
This table gives cross-reference parts and alternative options found for LTC1292CCN8#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1292CCN8#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC1292CCN8 | Linear Technology | Check for Price | LTC1292 - Single Chip 12-Bit Data Acquisition Systems; Package: PDIP; Pins: 8; Temperature Range: 0°C to 70°C | LTC1292CCN8#PBF vs LTC1292CCN8 |
| LTC1292CCJ8 | Linear Technology | Check for Price | IC 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, CDIP8, 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8, Analog to Digital Converter | LTC1292CCN8#PBF vs LTC1292CCJ8 |
| LTC1292CCN8#PBF | Linear Technology | Check for Price | LTC1292 - Single Chip 12-Bit Data Acquisition Systems; Package: PDIP; Pins: 8; Temperature Range: 0°C to 70°C | LTC1292CCN8#PBF vs LTC1292CCN8#PBF |
| LTC1292CCJ8#PBF | Linear Technology | Check for Price | IC 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, CDIP8, 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8, Analog to Digital Converter | LTC1292CCN8#PBF vs LTC1292CCJ8#PBF |
LTC1292CCN8#PBF Frequently Asked Questions (FAQ)
-
The maximum clock frequency that can be used with the LTC1292 is 1.5MHz. However, it's recommended to use a clock frequency between 100kHz to 500kHz for optimal performance.
-
To ensure accurate conversions with the LTC1292, make sure to follow proper layout and grounding techniques, use a low-noise power supply, and minimize digital noise coupling to the analog inputs. Additionally, use the recommended capacitor values for the internal oscillator and reference voltage.
-
Yes, the LTC1292 can be used with a single-ended analog input. However, the input signal should be referenced to the analog ground (AGND) pin, and the analog input range should be limited to 0V to VREF (2.5V or 5V) to avoid saturation.
-
The LTC1292 can be interfaced with a microcontroller using a 3-wire serial interface (SCK, SDI, and SDO). The microcontroller should provide a clock signal to the SCK pin, and the LTC1292 will output the converted data on the SDO pin. The SDI pin is used to input the control bits and start the conversion.
-
The LTC1292 has a power-on reset (POR) circuit that resets the internal registers and logic to their default state when the power supply voltage (VCC) rises above 1.5V. This ensures that the device starts in a known state after power-up.