Part Details for LTC1232IS8#TRPBF by Analog Devices Inc
Results Overview of LTC1232IS8#TRPBF by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Healthcare
Energy and Power Systems
Renewable Energy
Automotive
LTC1232IS8#TRPBF Information
LTC1232IS8#TRPBF by Analog Devices Inc is a Power Management Circuit.
Power Management Circuits are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LTC1232IS8#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-LTC1232IS8#TRPBFTR-ND
|
DigiKey | IC SUPERVISOR 1 CHANNEL 8SOIC Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$3.9500 | Buy Now |
|
DISTI #
584-LTC1232IS8#TRPBF
|
Mouser Electronics | Supervisory Circuits uP Supy Circ RoHS: Compliant | 0 |
|
$3.9500 | Order Now |
|
|
Analog Devices Inc | uP Supy Circ Min Qty: 2500 Package Multiple: 2500 | 7500 |
|
$3.1600 / $9.3700 | Buy Now |
|
DISTI #
LTC1232IS8TRPBF
|
Richardson RFPD | POWER MANAGEMENT IC RoHS: Compliant Min Qty: 2500 | 0 |
|
$4.0800 / $4.2400 | Buy Now |
Part Details for LTC1232IS8#TRPBF
LTC1232IS8#TRPBF CAD Models
LTC1232IS8#TRPBF Part Data Attributes
|
|
LTC1232IS8#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LTC1232IS8#TRPBF
Analog Devices Inc
Microprocessor Supervisory Circuit
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.150 INCH, PLASTIC, SOIC-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 05-08-1610 (S8) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Additional Feature | PUSH-BUTTON RESET | |
| Adjustable Threshold | NO | |
| Analog IC - Other Type | VOLTAGE SUPERVISOR/RESET IC | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9025 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.752 mm | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 4.5 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.899 mm |
Alternate Parts for LTC1232IS8#TRPBF
This table gives cross-reference parts and alternative options found for LTC1232IS8#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1232IS8#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MAX1232CSA+ | Analog Devices Inc | $3.8873 | Microprocessor Monitor, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | LTC1232IS8#TRPBF vs MAX1232CSA+ |
| DS1232LPS-2+ | Analog Devices Inc | $3.9370 | Low-Power MicroMonitor Chip, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | LTC1232IS8#TRPBF vs DS1232LPS-2+ |
| LTC1232IS8#TRPBF | Linear Technology | Check for Price | LTC1232 - Microprocessor Supervisory Circuit; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C | LTC1232IS8#TRPBF vs LTC1232IS8#TRPBF |
| DS1232LPU | Dallas Semiconductor | Check for Price | Power Supply Management Circuit, Fixed, 1 Channel, +4.37/4.62VV, CMOS, PDSO8, 0.118 INCH, MICRO, SOP-8 | LTC1232IS8#TRPBF vs DS1232LPU |
LTC1232IS8#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LTC1232IS8 involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing trace lengths and widths to reduce parasitic inductance and capacitance. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended.
-
To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Additionally, ensure that the input and output capacitors are of high quality and have low ESR. A minimum of 10uF input capacitance and 10uF output capacitance is recommended. Also, avoid using capacitors with high ESL (Equivalent Series Inductance).
-
The maximum ambient temperature range for the LTC1232IS8 is -40°C to 125°C. However, the device's performance and reliability may degrade at temperatures above 85°C. It's recommended to derate the device's output current and voltage at high temperatures.
-
Yes, the LTC1232IS8 is designed to operate in high-vibration environments. However, it's recommended to follow proper PCB mounting and soldering techniques to ensure the device is securely attached to the PCB. Additionally, consider using a conformal coating to protect the device from moisture and contaminants.
-
To troubleshoot issues with the LTC1232IS8, start by checking the input voltage, output voltage, and output current. Use an oscilloscope to check for oscillations or noise on the output. Verify that the input and output capacitors are of the correct value and type. Check the PCB layout for any signs of damage or contamination. Consult the datasheet and application notes for troubleshooting guides and FAQs.