Part Details for LTC1049CS8 by Linear Technology
Results Overview of LTC1049CS8 by Linear Technology
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Energy and Power Systems
Renewable Energy
Telecommunications
Automotive
LTC1049CS8 Information
LTC1049CS8 by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LTC1049CS8
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 2 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,SINGLE,CMOS,SOP,8PIN,PLASTIC | 58 |
|
$5.3650 / $8.7000 | Buy Now |
Part Details for LTC1049CS8
LTC1049CS8 CAD Models
LTC1049CS8 Part Data Attributes
|
|
LTC1049CS8
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC1049CS8
Linear Technology
LTC1049 - Low Power Zero-Drift Operational Amplifier with Internal Capacitors; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C
|
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, PLASTIC, SOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | S8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | CHOPPER-STAB | |
| Average Bias Current-Max (IIB) | 0.00015 µA | |
| Bias Current-Max (IIB) @25C | 0.00005 µA | |
| Common-mode Reject Ratio-Min | 110 dB | |
| Common-mode Reject Ratio-Nom | 130 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 10 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9025 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -9 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 235 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.752 mm | |
| Slew Rate-Nom | 0.8 V/us | |
| Supply Current-Max | 0.45 mA | |
| Supply Voltage Limit-Max | 9 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 20 | |
| Unity Gain BW-Nom | 800 | |
| Voltage Gain-Min | 3200000 | |
| Width | 3.899 mm |
Alternate Parts for LTC1049CS8
This table gives cross-reference parts and alternative options found for LTC1049CS8. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1049CS8, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC1049CS8#PBF | Analog Devices Inc | $5.2406 | Low Power Zero-Drift Operational Amplifier with Internal Capacitors | LTC1049CS8 vs LTC1049CS8#PBF |
| LTC1049CS8#TRPBF | Linear Technology | Check for Price | LTC1049 - Low Power Zero-Drift Operational Amplifier with Internal Capacitors; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C | LTC1049CS8 vs LTC1049CS8#TRPBF |
| LMV2011MF/NOPB | National Semiconductor Corporation | Check for Price | IC OP-AMP, 35 uV OFFSET-MAX, 3 MHz BAND WIDTH, PDSO5, ROHS COMPLIANT, SOT-23, 5-PIN, Operational Amplifier | LTC1049CS8 vs LMV2011MF/NOPB |
| LMV2011MF | National Semiconductor Corporation | Check for Price | IC OP-AMP, 35 uV OFFSET-MAX, 3 MHz BAND WIDTH, PDSO5, SOT-23, 5-PIN, Operational Amplifier | LTC1049CS8 vs LMV2011MF |
LTC1049CS8 Frequently Asked Questions (FAQ)
-
The maximum clock frequency that can be used with the LTC1049CS8 is 1MHz. However, it's recommended to use a clock frequency of 100kHz to 500kHz for optimal performance.
-
To ensure proper power-up and initialization, make sure to follow the recommended power-up sequence: VCC, then CLK, then CS. Also, ensure that the CS pin is high during power-up and that the CLK pin is low during power-up.
-
For optimal performance, it's recommended to use a symmetrical layout and routing for the analog and digital signals. Keep the analog and digital grounds separate and use a solid ground plane. Also, keep the clock and data lines as short as possible and away from noise sources.
-
The LTC1049CS8 outputs serial data in a 12-bit, two's complement format. To handle the output data, you'll need to use a microcontroller or FPGA to receive and process the data. You may also need to add additional circuitry to convert the serial data to parallel data if required.
-
The typical settling time for the LTC1049CS8 is 10µs to 20µs, depending on the input signal and the clock frequency. However, this can vary depending on the specific application and operating conditions.