Part Details for LT3008EDC-2.5#TRPBF by Analog Devices Inc
Results Overview of LT3008EDC-2.5#TRPBF by Analog Devices Inc
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
LT3008EDC-2.5#TRPBF Information
LT3008EDC-2.5#TRPBF by Analog Devices Inc is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LT3008EDC-2.5#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LT3008EDC-2.5#TRPBF-ND
|
DigiKey | IC REG LINEAR 2.5V 20MA 6-DFN Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$1.8500 | Buy Now |
|
DISTI #
584-3008EDC-2.5TRPBF
|
Mouser Electronics | LDO Voltage Regulators 3uA IQ, 20mA, 45V L Drop Lin Regs RoHS: Compliant | 0 |
|
$1.9300 | Order Now |
|
|
Analog Devices Inc | 3µA IQ, 20mA, 45V L Drop Lin R Min Qty: 2500 Package Multiple: 2500 | 0 |
|
$1.4800 / $2.0100 | Buy Now |
|
DISTI #
LT3008EDC2.5TRP
|
Richardson RFPD | VOLTAGE REGULATOR RoHS: Compliant Min Qty: 2500 | 0 |
|
$1.9100 / $1.9900 | Buy Now |
Part Details for LT3008EDC-2.5#TRPBF
LT3008EDC-2.5#TRPBF CAD Models
LT3008EDC-2.5#TRPBF Part Data Attributes
|
|
LT3008EDC-2.5#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LT3008EDC-2.5#TRPBF
Analog Devices Inc
LT3008EDC-2.5#TRPBF
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 2 X 2 MM, LEAD FREE, PLASTIC, M0-229WCCD-2, DFN-6 | |
| Pin Count | 6 | |
| Manufacturer Package Code | 05-08-1703 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Dropout Voltage1-Max | 0.5 V | |
| Dropout Voltage1-Nom | 0.3 V | |
| Input Voltage-Max | 45 V | |
| Input Voltage-Min | 2 V | |
| JESD-30 Code | S-PDSO-N6 | |
| JESD-609 Code | e3 | |
| Length | 2 mm | |
| Load Regulation-Max | 0.021% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 6 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.02 A | |
| Output Voltage1-Max | 2.55 V | |
| Output Voltage1-Min | 2.45 V | |
| Output Voltage1-Nom | 2.5 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 0.8 mm | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Tolerance-Max | 2% | |
| Width | 2 mm |
Alternate Parts for LT3008EDC-2.5#TRPBF
This table gives cross-reference parts and alternative options found for LT3008EDC-2.5#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT3008EDC-2.5#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT3008IDC-2.5#PBF | Analog Devices Inc | Check for Price | 3µA IQ, 20mA, 45V Low Dropout Linear Regulators | LT3008EDC-2.5#TRPBF vs LT3008IDC-2.5#PBF |
| LT3008IDC-2.5 | Analog Devices Inc | Check for Price | Fixed Positive LDO Regulator, 2.5V, 0.5V Dropout, PDSO6 | LT3008EDC-2.5#TRPBF vs LT3008IDC-2.5 |
| LT3008IDC-2.5#TRMPBF | Linear Technology | Check for Price | LT3008 Series - 3µA IQ, 20mA, 45V Low Dropout Linear Regulators; Package: DFN; Pins: 6; Temperature Range: -40°C to 85°C | LT3008EDC-2.5#TRPBF vs LT3008IDC-2.5#TRMPBF |
LT3008EDC-2.5#TRPBF Frequently Asked Questions (FAQ)
-
Analog Devices provides a recommended PCB layout in the datasheet, but it's also recommended to follow general best practices for switching regulator layouts, such as keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing trace lengths and widths.
-
To ensure stability, follow the datasheet's guidelines for output capacitor selection, and make sure the output capacitor's ESR is within the recommended range. Additionally, ensure that the input capacitor is properly sized and placed close to the IC. If oscillations occur, try adding a small ceramic capacitor (e.g., 10nF) between the VOUT and GND pins.
-
The maximum ambient temperature for the LT3008EDC-2.5 is 125°C, but the device's performance and reliability may degrade at high temperatures. It's essential to consider the device's thermal characteristics and ensure proper heat sinking and airflow in the system design.
-
While the LT3008EDC-2.5 is a high-quality device, it may not meet the specific requirements for high-reliability or automotive applications. Analog Devices offers other devices, such as the LT3008H, which are specifically designed for high-reliability and automotive applications. Consult the datasheet and Analog Devices' support team to determine the best device for your specific application.
-
To troubleshoot issues, start by verifying the input voltage, output voltage, and current. Check the PCB layout and component values against the datasheet's recommendations. Use an oscilloscope to monitor the output voltage and current waveforms. If issues persist, consult the datasheet's troubleshooting section and contact Analog Devices' support team for further assistance.