Part Details for LT3008EDC#TRPBF by Analog Devices Inc
Results Overview of LT3008EDC#TRPBF by Analog Devices Inc
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
LT3008EDC#TRPBF Information
LT3008EDC#TRPBF by Analog Devices Inc is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LT3008EDC#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
505-LT3008EDC#TRPBFTR-ND
|
DigiKey | IC REG LINEAR POS ADJ 20MA 6-DFN Min Qty: 2500 Lead time: 10 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$1.8500 | Buy Now |
|
DISTI #
584-LT3008EDC#TRPBF
|
Mouser Electronics | LDO Voltage Regulators 3uA IQ, 20mA, 45V L Drop Lin Regs RoHS: Compliant | 0 |
|
$1.9200 / $5.2700 | Order Now |
|
|
Analog Devices Inc | 3µA IQ, 20mA, 45V L Drop Lin R Min Qty: 2500 Package Multiple: 2500 | 2500 |
|
$1.8500 / $5.1500 | Buy Now |
|
DISTI #
35242402
|
Verical | LDO Regulator Pos 0.6V to 44.5V 0.02A 6-Pin DFN EP T/R RoHS: Compliant Min Qty: 2500 Package Multiple: 2500 | Americas - 2500 |
|
$1.8306 | Buy Now |
|
DISTI #
LT3008EDC#TRPBF
|
Richardson RFPD | VOLTAGE REGULATOR RoHS: Compliant Min Qty: 2500 | 0 |
|
$1.9100 / $1.9900 | Buy Now |
|
|
Win Source Electronics | IC REG LINEAR POS ADJ 20MA 6DFN | 5300 |
|
$2.3421 / $3.5130 | Buy Now |
Part Details for LT3008EDC#TRPBF
LT3008EDC#TRPBF CAD Models
LT3008EDC#TRPBF Part Data Attributes
|
|
LT3008EDC#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LT3008EDC#TRPBF
Analog Devices Inc
LT3008EDC#TRPBF
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 2 X 2 MM, LEAD FREE, PLASTIC, M0-229WCCD-2, DFN-6 | |
| Pin Count | 6 | |
| Manufacturer Package Code | 05-08-1703 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Dropout Voltage1-Max | 0.5 V | |
| Input Voltage-Max | 45 V | |
| Input Voltage-Min | 2 V | |
| JESD-30 Code | S-PDSO-N6 | |
| JESD-609 Code | e3 | |
| Length | 2 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 6 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 0.02 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HVSON | |
| Package Equivalence Code | SOLCC6,.08,20 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 0.85 mm | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 2 mm |
Alternate Parts for LT3008EDC#TRPBF
This table gives cross-reference parts and alternative options found for LT3008EDC#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT3008EDC#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT3008EDC#TR | Linear Technology | Check for Price | IC VREG FIXED POSITIVE LDO REGULATOR, 0.5 V DROPOUT, PDSO6, 2 X 2 MM, LEAD FREE, PLASTIC, M0-229WCCD-2, DFN-6, Fixed Positive Single Output LDO Regulator | LT3008EDC#TRPBF vs LT3008EDC#TR |
| LT3008EDC#TR | Analog Devices Inc | Check for Price | Fixed Positive LDO Regulator, 0.5V Dropout, PDSO6 | LT3008EDC#TRPBF vs LT3008EDC#TR |
LT3008EDC#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LT3008EDC#TRPBF involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing trace lengths and widths to reduce noise and EMI. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
-
To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Also, ensure that the output capacitor has a low ESR and is properly decoupled from the input. Additionally, consider adding a small resistor (e.g., 10Ω) in series with the output capacitor to dampen oscillations.
-
The LT3008EDC#TRPBF is rated for operation up to 125°C ambient temperature, but it's recommended to derate the output current and voltage as the temperature increases to ensure reliable operation. Consult the datasheet for thermal derating curves.
-
While it's possible to use a different inductor value or type, it's not recommended as it may affect the device's performance and stability. The recommended inductor values and types are carefully selected to ensure optimal performance and efficiency. If you must use a different inductor, consult with Analog Devices' application engineers for guidance.
-
Start by checking the input and output voltages, currents, and waveforms using an oscilloscope. Verify that the device is properly powered and that the input and output capacitors are properly connected. Check for signs of overheating, and ensure that the PCB layout and component values are correct. Consult the datasheet and application notes for troubleshooting guides and FAQs.