Part Details for LT1637HS8#PBF by Linear Technology
Results Overview of LT1637HS8#PBF by Linear Technology
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Industrial Automation
Agriculture Technology
Medical Imaging
Electronic Manufacturing
LT1637HS8#PBF Information
LT1637HS8#PBF by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1637HS8#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 43 |
|
RFQ |
Part Details for LT1637HS8#PBF
LT1637HS8#PBF CAD Models
LT1637HS8#PBF Part Data Attributes
|
|
LT1637HS8#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1637HS8#PBF
Linear Technology
LT1637 - 1.1MHz, 0.4V/us Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp; Package: SO; Pins: 8; Temperature Range: -40°C to 125°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, PLASTIC, SO-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | S8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.25 µA | |
| Bias Current-Max (IIB) @25C | 0.05 µA | |
| Common-mode Reject Ratio-Nom | 72 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 3400 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Low-Bias | NO | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -22 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Slew Rate-Min | 0.18 V/us | |
| Slew Rate-Nom | 0.4 V/us | |
| Supply Current-Max | 0.37 mA | |
| Supply Voltage Limit-Max | 22 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 1100 | |
| Voltage Gain-Min | 50000 | |
| Wideband | NO | |
| Width | 3.9 mm |
Alternate Parts for LT1637HS8#PBF
This table gives cross-reference parts and alternative options found for LT1637HS8#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1637HS8#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1637CS8#TRPBF | Analog Devices Inc | $3.0892 | 1.1MHz, 0.4V/µs Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp | LT1637HS8#PBF vs LT1637CS8#TRPBF |
| LT1637CS8#PBF | Analog Devices Inc | $3.4694 | 1.1MHz, 0.4V/µs Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp | LT1637HS8#PBF vs LT1637CS8#PBF |
| LT1637IS8#TRPBF | Analog Devices Inc | $3.5304 | 1.1MHz, 0.4V/µs Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp | LT1637HS8#PBF vs LT1637IS8#TRPBF |
| LT1637IS8#PBF | Analog Devices Inc | $3.5968 | 1.1MHz, 0.4V/µs Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp | LT1637HS8#PBF vs LT1637IS8#PBF |
| LT1637MPS8#PBF | Analog Devices Inc | $9.9235 | 1.1MHz, 0.4V/µs Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp | LT1637HS8#PBF vs LT1637MPS8#PBF |
| LT1637HS8#TRPBF | Analog Devices Inc | Check for Price | 1.1MHz, 0.4V/µs Over-The-Top Micropower, Rail-To-Rail Input and Output Op Amp | LT1637HS8#PBF vs LT1637HS8#TRPBF |
| LT1637IS8#TR | Analog Devices Inc | Check for Price | Operational Amplifier, 1 Func, 800uV Offset-Max, BIPolar, PDSO8 | LT1637HS8#PBF vs LT1637IS8#TR |
LT1637HS8#PBF Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the LT1637HS8#PBF is -40°C to 125°C.
-
To ensure stability, follow the recommended layout and component selection guidelines in the datasheet, and use a compensation capacitor between pins 5 and 6. Additionally, ensure that the input and output capacitors are of high quality and have low ESR.
-
The recommended input capacitor value for the LT1637HS8#PBF is 10uF to 22uF, with a low ESR (Equivalent Series Resistance) of less than 1 ohm.
-
The LT1637HS8#PBF is designed for high-current applications, but it's essential to ensure that the device is properly heat-sinked and that the maximum current rating is not exceeded. The device can deliver up to 3A of output current.
-
Use voltage protection devices such as TVS diodes or zener diodes to protect the LT1637HS8#PBF from overvoltage conditions. For undervoltage protection, use a voltage supervisor or a reset IC to monitor the input voltage and reset the system if it falls below a certain threshold.