Part Details for LT1206CS8 by Analog Devices Inc
Results Overview of LT1206CS8 by Analog Devices Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
LT1206CS8 Information
LT1206CS8 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1206CS8
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LT1206CS8-ND
|
DigiKey | IC OPAMP CFA 1 CIRCUIT 8SO Lead time: 10 Weeks Container: Tube | Temporarily Out of Stock |
|
Buy Now | |
|
DISTI #
VN5:3623_16965808
|
Arrow Electronics | Op Amp Single Low Noise Amplifier ±15V 8-Pin SOIC N RoHS: Not Compliant Min Qty: 1 Package Multiple: 1 Lead time: 110 Weeks Date Code: 2004 | Americas - 25 |
|
$88.1500 / $101.7100 | Buy Now |
|
DISTI #
36451514
|
Verical | Op Amp Single Low Noise Amplifier ±15V 8-Pin SOIC N RoHS: Not Compliant Min Qty: 1 Package Multiple: 1 Date Code: 2004 | Americas - 25 |
|
$88.1500 / $101.7100 | Buy Now |
Part Details for LT1206CS8
LT1206CS8 CAD Models
LT1206CS8 Part Data Attributes
|
|
LT1206CS8
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LT1206CS8
Analog Devices Inc
Operational Amplifier, 1 Func, 15000uV Offset-Max, BIPolar, PDSO8
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.150 INCH, PLASTIC, SOP-8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Average Bias Current-Max (IIB) | 5 µA | |
| Common-mode Reject Ratio-Nom | 62 dB | |
| Input Offset Voltage-Max | 15000 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9025 mm | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.752 mm | |
| Slew Rate-Nom | 900 V/us | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 60000 | |
| Width | 3.899 mm |
Alternate Parts for LT1206CS8
This table gives cross-reference parts and alternative options found for LT1206CS8. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1206CS8, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1206CS8 | Linear Technology | $4.9165 | LT1206 - 250mA/60MHz Current Feedback Amplifier; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C | LT1206CS8 vs LT1206CS8 |
| LT1206CS8#PBF | Analog Devices Inc | $7.9345 | 250mA/60MHz Current Feedback Amplifier | LT1206CS8 vs LT1206CS8#PBF |
| LT1206CS8#PBF | Linear Technology | Check for Price | LT1206 - 250mA/60MHz Current Feedback Amplifier; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C | LT1206CS8 vs LT1206CS8#PBF |
| LT1206CS8#TR | Analog Devices Inc | Check for Price | Operational Amplifier, 1 Func, 15000uV Offset-Max, BIPolar, PDSO8 | LT1206CS8 vs LT1206CS8#TR |
| LT1206CS8#TRPBF | Linear Technology | Check for Price | LT1206 - 250mA/60MHz Current Feedback Amplifier; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C | LT1206CS8 vs LT1206CS8#TRPBF |
LT1206CS8 Frequently Asked Questions (FAQ)
-
A good PCB layout for the LT1206CS8 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a low-ESR output capacitor and to minimize the loop area of the input and output traces to reduce EMI.
-
To ensure stability, make sure to follow the recommended compensation network in the datasheet, and use a minimum output capacitance of 10uF with an ESR of less than 1 ohm. Additionally, avoid using long input and output traces, and keep the device away from noise sources.
-
The LT1206CS8 is rated for operation from -40°C to 125°C, but the maximum ambient temperature range depends on the specific application and the device's power dissipation. It's recommended to derate the device's power dissipation at higher temperatures to ensure reliable operation.
-
The LT1206CS8 is a commercial-grade device, but Analog Devices Inc offers a military-grade version, the LT1206MS8, which is designed for high-reliability and aerospace applications. The military-grade version has additional screening and testing to ensure higher reliability and performance in harsh environments.
-
To troubleshoot issues with the LT1206CS8, start by checking the input voltage, output load, and PCB layout for any errors or deviations from the recommended design. Use an oscilloscope to measure the output voltage and current, and check for any signs of oscillation or instability. Also, ensure that the device is properly decoupled and that the input and output capacitors are of sufficient value and quality.