Part Details for LT1206CR#TRPBF by Linear Technology
Results Overview of LT1206CR#TRPBF by Linear Technology
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
LT1206CR#TRPBF Information
LT1206CR#TRPBF by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1206CR#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 514 |
|
RFQ |
Part Details for LT1206CR#TRPBF
LT1206CR#TRPBF CAD Models
LT1206CR#TRPBF Part Data Attributes
|
|
LT1206CR#TRPBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1206CR#TRPBF
Linear Technology
LT1206 - 250mA/60MHz Current Feedback Amplifier; Package: DD PAK; Pins: 7; Temperature Range: 0°C to 70°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | D2PAK | |
| Package Description | LEAD FREE, PLASTIC, DDPAK-7 | |
| Pin Count | 7 | |
| Manufacturer Package Code | R | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | CURRENT-FEEDBACK | |
| Average Bias Current-Max (IIB) | 5 µA | |
| Bias Current-Max (IIB) @25C | 34 µA | |
| Common-mode Reject Ratio-Nom | 62 dB | |
| Frequency Compensation | YES (AVCL>=2) | |
| Input Offset Voltage-Max | 15000 µV | |
| JESD-30 Code | R-PSSO-G7 | |
| JESD-609 Code | e3 | |
| Length | 10.2235 mm | |
| Low-Offset | NO | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -5 V | |
| Number of Functions | 1 | |
| Number of Terminals | 7 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | SMSIP7H,.55,50TB | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG | |
| Packing Method | TAPE AND REEL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | YES | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.877 mm | |
| Slew Rate-Min | 400 V/us | |
| Slew Rate-Nom | 900 V/us | |
| Supply Current-Max | 35 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | SINGLE | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 60000 | |
| Width | 8.89 mm |
Alternate Parts for LT1206CR#TRPBF
This table gives cross-reference parts and alternative options found for LT1206CR#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1206CR#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1206CR#PBF | Analog Devices Inc | $7.8750 | 250mA/60MHz Current Feedback Amplifier | LT1206CR#TRPBF vs LT1206CR#PBF |
| LT1206CR#TRPBF | Analog Devices Inc | $8.3315 | 250mA/60MHz Current Feedback Amplifier | LT1206CR#TRPBF vs LT1206CR#TRPBF |
| LT1206CR#TR | Linear Technology | Check for Price | LT1206 - 250mA/60MHz Current Feedback Amplifier; Package: DD PAK; Pins: 7; Temperature Range: 0°C to 70°C | LT1206CR#TRPBF vs LT1206CR#TR |
| LT1206CR | Linear Technology | Check for Price | LT1206 - 250mA/60MHz Current Feedback Amplifier; Package: DD PAK; Pins: 7; Temperature Range: 0°C to 70°C | LT1206CR#TRPBF vs LT1206CR |
| LT1206CR | Analog Devices Inc | Check for Price | Operational Amplifier, 1 Func, 15000uV Offset-Max, BIPolar, PSSO7 | LT1206CR#TRPBF vs LT1206CR |
LT1206CR#TRPBF Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the LT1206CR#TRPBF involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing trace lengths and widths to reduce parasitic inductance and capacitance. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
-
To ensure stability and prevent oscillations, it's essential to follow the recommended compensation network and output capacitor values, and to ensure that the output capacitor has a low equivalent series resistance (ESR). Additionally, the input voltage should be well-regulated, and the device should be operated within its recommended operating conditions.
-
The maximum junction temperature that the LT1206CR#TRPBF can withstand is 150°C. However, it's recommended to operate the device at a junction temperature below 125°C to ensure reliable operation and to prevent thermal shutdown.
-
Yes, the LT1206CR#TRPBF is suitable for high-reliability and automotive applications. It's manufactured using a high-reliability process, and it's qualified to meet the requirements of the AEC-Q100 standard for automotive applications.
-
The power dissipation of the LT1206CR#TRPBF can be calculated using the equation Pd = (Vin - Vout) x Iout. The heat sink requirements can be determined using the thermal resistance of the device and the maximum junction temperature. A heat sink calculator or thermal simulation tool can be used to determine the required heat sink size and thermal interface material.