Part Details for LT1114S by Linear Technology
Results Overview of LT1114S by Linear Technology
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Education and Research
Environmental Monitoring
Industrial Automation
Audio and Video Systems
Agriculture Technology
Medical Imaging
Entertainment and Gaming
LT1114S Information
LT1114S by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1114S
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 17 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,QUAD,BIPOLAR,SOP,16PIN,PLASTIC | 28 |
|
$7.0000 / $10.5000 | Buy Now |
|
|
Component Electronics, Inc | IN STOCK SHIP TODAY | 10 |
|
$5.0000 / $7.6900 | Buy Now |
|
|
Vyrian | Amplifiers | 763 |
|
RFQ |
Part Details for LT1114S
LT1114S CAD Models
LT1114S Part Data Attributes
|
|
LT1114S
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1114S
Linear Technology
LT1114 - Dual/Quad Low Power Precision, Picoamp Input Op Amps; Package: SO; Pins: 16; Temperature Range: 0°C to 70°C
|
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, PLASTIC, SOP-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | S | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.00055 µA | |
| Bias Current-Max (IIB) @25C | 0.00045 µA | |
| Common-mode Reject Ratio-Nom | 133 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 150 µV | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e0 | |
| Length | 9.9 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -20 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 4 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.752 mm | |
| Slew Rate-Min | 0.13 V/us | |
| Slew Rate-Nom | 0.27 V/us | |
| Supply Current-Max | 2.04 mA | |
| Supply Voltage Limit-Max | 20 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 750 | |
| Voltage Gain-Min | 300000 | |
| Width | 3.9 mm |
Alternate Parts for LT1114S
This table gives cross-reference parts and alternative options found for LT1114S. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1114S, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1114S#TR | Analog Devices Inc | Check for Price | Operational Amplifier, 4 Func, 150uV Offset-Max, BIPolar, PDSO16 | LT1114S vs LT1114S#TR |
| LT1114S#TRPBF | Linear Technology | Check for Price | LT1114 - Dual/Quad Low Power Precision, Picoamp Input Op Amps; Package: SO; Pins: 16; Temperature Range: 0°C to 70°C | LT1114S vs LT1114S#TRPBF |
| LT1114IS#PBF | Linear Technology | Check for Price | LT1114 - Dual/Quad Low Power Precision, Picoamp Input Op Amps; Package: SO; Pins: 16; Temperature Range: -40°C to 85°C | LT1114S vs LT1114IS#PBF |
| LT1114IS#TRPBF | Analog Devices Inc | Check for Price | Dual/Quad Low Power Precision, Picoamp Input Op Amps | LT1114S vs LT1114IS#TRPBF |
| LT1114IS#TR | Analog Devices Inc | Check for Price | Operational Amplifier, 4 Func, 160uV Offset-Max, BIPolar, PDSO16 | LT1114S vs LT1114IS#TR |
| LT1114IS#TRPBF | Linear Technology | Check for Price | LT1114 - Dual/Quad Low Power Precision, Picoamp Input Op Amps; Package: SO; Pins: 16; Temperature Range: -40°C to 85°C | LT1114S vs LT1114IS#TRPBF |
| FT1114S | Force Technologies Ltd | Check for Price | Operational Amplifier, 4 Func, PDSO16, PLASTIC, SOP-16 | LT1114S vs FT1114S |
| FT1114IS | Force Technologies Ltd | Check for Price | Operational Amplifier, 4 Func, 130uV Offset-Max, PDSO16, PLASTIC, SOP-16 | LT1114S vs FT1114IS |
LT1114S Frequently Asked Questions (FAQ)
-
The LT1114S can handle input voltages up to 80V, but it's recommended to limit the input voltage to 60V for reliable operation.
-
To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, keep the input and output capacitors close to the regulator to minimize parasitic inductance.
-
The LT1114S can maintain regulation down to a minimum load current of 1mA, but it's recommended to have a minimum load current of 10mA for optimal performance.
-
The LT1114S is rated for operation up to 125°C, but its performance may degrade at high temperatures. Make sure to derate the output current and input voltage according to the temperature derating curves in the datasheet.
-
Use a TVS (Transient Voltage Suppressor) diode or a voltage clamp circuit at the input to protect the LT1114S from voltage transients. Also, make sure to use a input capacitor with a high voltage rating to absorb voltage spikes.