-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LT1112ACN8#PBF by Analog Devices Inc
Results Overview of LT1112ACN8#PBF by Analog Devices Inc
- Distributor Offerings: (7 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LT1112ACN8#PBF Information
LT1112ACN8#PBF by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1112ACN8#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
51AK7788
|
Newark | Op-Amp, 750Khz, -40 To 85Deg C, Dip-8, No. Of Channels:2Channels, Gain Bandwidth Product:750Khz, Supply Voltage Range:± 1V To ± 20V, Ic Case/Package:Dip, No. Of Pins:8Pins, Amplifier Type:General Purpose, Rail To Rail:- Rohs Compliant: Yes |Analog Devices LT1112ACN8#PBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Bulk | 31 |
|
$5.7600 / $10.9200 | Buy Now |
|
DISTI #
LT1112ACN8#PBF-ND
|
DigiKey | IC OPAMP GP 2 CIRCUIT 8DIP Min Qty: 1 Lead time: 10 Weeks Container: Tube | Temporarily Out of Stock |
|
$5.4625 / $11.4000 | Buy Now |
|
DISTI #
584-LT1112ACN8#PBF
|
Mouser Electronics | Precision Amplifiers 2x L Pwr Prec, pA In Op Amps RoHS: Compliant | 123 |
|
$5.6800 / $10.9200 | Buy Now |
|
DISTI #
V36:1790_06413840
|
Arrow Electronics | Op Amp Dual Low Power Amplifier ±20V 8-Pin PDIP N Tube RoHS: Compliant Min Qty: 100 Package Multiple: 50 Lead time: 10 Weeks Date Code: 1921 | Americas - 8 |
|
$5.1020 | Buy Now |
|
|
Analog Devices Inc | 2x L Pwr Prec, pA In Op Amps Package Multiple: 50 | 2300 |
|
$4.3700 / $11.4000 | Buy Now |
|
|
Rochester Electronics | LT1112 - Dual Low Power Precision, Picoamp Input Op Amps RoHS: Compliant Status: Active Min Qty: 1 | 9 |
|
$4.6000 / $5.7500 | Buy Now |
|
DISTI #
LT1112ACN8#PBF
|
Richardson RFPD | AMPLIFIER - OP AMPS RoHS: Compliant Min Qty: 100 | 0 |
|
$5.6400 / $6.1900 | Buy Now |
Part Details for LT1112ACN8#PBF
LT1112ACN8#PBF CAD Models
LT1112ACN8#PBF Part Data Attributes
|
|
LT1112ACN8#PBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LT1112ACN8#PBF
Analog Devices Inc
Dual Low Power Precision, Picoamp Input Op Amps
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.300 INCH, PLASTIC, DIP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 05-08-1510 (N8) | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.0003 µA | |
| Common-mode Reject Ratio-Nom | 133 dB | |
| Input Offset Voltage-Max | 100 µV | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -20 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 3.937 mm | |
| Slew Rate-Nom | 0.27 V/us | |
| Supply Voltage Limit-Max | 20 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 750 | |
| Width | 7.62 mm |
Alternate Parts for LT1112ACN8#PBF
This table gives cross-reference parts and alternative options found for LT1112ACN8#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1112ACN8#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1112IN8#PBF | Analog Devices Inc | $4.8951 | Dual Low Power Precision, Picoamp Input Op Amps | LT1112ACN8#PBF vs LT1112IN8#PBF |
| LT1112ACJ8 | Linear Technology | Check for Price | IC DUAL OP-AMP, 95 uV OFFSET-MAX, 0.65 MHz BAND WIDTH, CDIP8, CERDIP-8, Operational Amplifier | LT1112ACN8#PBF vs LT1112ACJ8 |
| LT1112ACN8#PBF | Linear Technology | Check for Price | LT1112 - Dual Low Power Precision, Picoamp Input Op Amps; Package: PDIP; Pins: 8; Temperature Range: 0°C to 70°C | LT1112ACN8#PBF vs LT1112ACN8#PBF |
| LT1112MJ8/883B | Linear Technology | Check for Price | IC DUAL OP-AMP, 130 uV OFFSET-MAX, 0.65 MHz BAND WIDTH, CDIP8, CERDIP-8, Operational Amplifier | LT1112ACN8#PBF vs LT1112MJ8/883B |
| FT1112ACN8 | Force Technologies Ltd | Check for Price | Operational Amplifier, 2 Func, 110uV Offset-Max, PDIP8, PLASTIC, DIP-8 | LT1112ACN8#PBF vs FT1112ACN8 |
| LT1112IN8 | Analog Devices Inc | Check for Price | Operational Amplifier, 2 Func, 135uV Offset-Max, BIPolar, PDIP8 | LT1112ACN8#PBF vs LT1112IN8 |
| LT1112AMJ8/883B | Linear Technology | Check for Price | IC DUAL OP-AMP, 95 uV OFFSET-MAX, 0.65 MHz BAND WIDTH, CDIP8, CERDIP-8, Operational Amplifier | LT1112ACN8#PBF vs LT1112AMJ8/883B |
| LT1112AIN8 | Linear Technology | Check for Price | IC DUAL OP-AMP, PDIP8, PLASTIC, DIP-8, Operational Amplifier | LT1112ACN8#PBF vs LT1112AIN8 |
| LT1112MJ8 | Linear Technology | Check for Price | LT1112 - Dual Low Power Precision, Picoamp Input Op Amps; Package: CERDIP; Pins: 8; Temperature Range: -55°C to 125°C | LT1112ACN8#PBF vs LT1112MJ8 |
| LT1112IN8#PBF | Linear Technology | Check for Price | LT1112 - Dual Low Power Precision, Picoamp Input Op Amps; Package: PDIP; Pins: 8; Temperature Range: -40°C to 85°C | LT1112ACN8#PBF vs LT1112IN8#PBF |
LT1112ACN8#PBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LT1112 involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing trace lengths and widths to reduce parasitic inductance and capacitance. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
-
To ensure stability, make sure to follow the recommended compensation network, use a minimum output capacitance of 10uF, and avoid using capacitors with high ESR. Also, ensure that the input voltage is within the recommended range and the device is operated within its specified temperature range.
-
The LT1112 can operate in an ambient temperature range of -40°C to 125°C. However, the device's performance and reliability may degrade at higher temperatures, so it's recommended to operate it at a temperature below 85°C for optimal performance.
-
Yes, the LT1112 is qualified for automotive and high-reliability applications. It meets the requirements of AEC-Q100 and is manufactured using a qualified process. However, it's essential to follow the recommended design and layout guidelines to ensure the device operates reliably in these applications.
-
To troubleshoot issues with the LT1112, start by verifying the input voltage, output voltage, and current. Check for any signs of overheating, and ensure that the device is operated within its specified temperature range. Use an oscilloscope to check for any oscillations or noise on the output, and verify that the compensation network is correctly implemented.