Part Details for LT1086IM#TRPBF by Analog Devices Inc
Results Overview of LT1086IM#TRPBF by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (8 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LT1086IM#TRPBF Information
LT1086IM#TRPBF by Analog Devices Inc is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LT1086IM#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
50AK4553
|
Newark | Ldo, Adj, 1.5A, To-263-3, 125Deg C, Output Type:Adjustable, Input Voltage Min:2.55V, Input Voltage Max:25V, No. Of Outputs:-, Output Voltage Min:-, Output Voltage Max:-, Polarity:-, Ic Mounting:Surface Mount, No. Of Pins:3Pins Rohs Compliant: Yes |Analog Devices LT1086IM#TRPBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 614 |
|
$4.6500 / $8.0300 | Buy Now |
|
DISTI #
LT1086IM#TRPBFCT-ND
|
DigiKey | IC REG LIN POS ADJ 1.5A DDPAK-3 Min Qty: 1 Lead time: 10 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
886 In Stock |
|
$4.3250 / $9.5800 | Buy Now |
|
DISTI #
584-LT1086IM#TRPBF
|
Mouser Electronics | LDO Voltage Regulators 1.5A L Drop Pos Regs Adj & Fixed 2.85V, RoHS: Compliant | 703 |
|
$4.6500 / $8.0300 | Buy Now |
|
|
Analog Devices Inc | 1.5A L Drop Pos Regs Adj & Fix Min Qty: 1 Package Multiple: 750 | 928 |
|
$3.4600 / $9.5800 | Buy Now |
|
DISTI #
LT1086IM#TRPBF
|
Richardson RFPD | VOLTAGE REGULATOR RoHS: Compliant Min Qty: 750 | 0 |
|
$4.4700 / $4.7700 | Buy Now |
Part Details for LT1086IM#TRPBF
LT1086IM#TRPBF CAD Models
LT1086IM#TRPBF Part Data Attributes
|
|
LT1086IM#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LT1086IM#TRPBF
Analog Devices Inc
1.5A Low Dropout Positive Regulators Adjustable and Fixed 2.85V, 3.3V, 3.6V, 5V, 12V
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | LEAD FREE, PLASTIC, D2PAK-3 | |
| Pin Count | 3 | |
| Manufacturer Package Code | 05-08-1460 | |
| Reach Compliance Code | not_compliant | |
| Samacsys Manufacturer | Analog Devices | |
| Dropout Voltage1-Max | 1.5 V | |
| Input-Output Voltage Differential-Max | 15 V | |
| Input-Output Voltage Differential-Min | 1.5 V | |
| JESD-30 Code | R-PSSO-G3 | |
| JESD-609 Code | e3 | |
| Length | 10.2235 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 3 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Output Current1-Max | 1.5 A | |
| Output Voltage1-Max | 15 V | |
| Output Voltage1-Min | 1.2 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 245 | |
| Qualification Status | Not Qualified | |
| Regulator Type | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 4.877 mm | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | SINGLE | |
| Width | 8.89 mm |
Alternate Parts for LT1086IM#TRPBF
This table gives cross-reference parts and alternative options found for LT1086IM#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1086IM#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LM1086CS-ADJ | Texas Instruments | $1.0933 | 1.5-A, 29-V, linear voltage regulator 3-DDPAK/TO-263 | LT1086IM#TRPBF vs LM1086CS-ADJ |
| LM1086IS-ADJ | Texas Instruments | $1.0933 | 1.2 V-15V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5V DROPOUT, PSSO3, TO-263, 3 PIN | LT1086IM#TRPBF vs LM1086IS-ADJ |
| LT1086CM#TRPBF | Analog Devices Inc | $4.3058 | 1.5A Low Dropout Positive Regulators Adjustable and Fixed 2.85V, 3.3V, 3.6V, 5V, 12V | LT1086IM#TRPBF vs LT1086CM#TRPBF |
| LT1086IM#TRPBF | Linear Technology | Check for Price | LT1086 - 1.5A Low Dropout Positive Regulators Adjustable and Fixed 2.85V, 3.3V, 3.6V, 5V, 12V; Package: DD PAK; Pins: 3; Temperature Range: -40°C to 85°C | LT1086IM#TRPBF vs LT1086IM#TRPBF |
| LM1086ISX-ADJ | National Semiconductor Corporation | Check for Price | IC VREG 1.2 V-15 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, TO-263, 3 PIN, Adjustable Positive Single Output LDO Regulator | LT1086IM#TRPBF vs LM1086ISX-ADJ |
| LM1086ISX-ADJ | Texas Instruments | Check for Price | 1.2 V-15V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5V DROPOUT, PSSO3, TO-263, 3 PIN | LT1086IM#TRPBF vs LM1086ISX-ADJ |
| LM1086CSX-ADJ | National Semiconductor Corporation | Check for Price | IC VREG 1.2 V-15 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, TO-263, 3 PIN, Adjustable Positive Single Output LDO Regulator | LT1086IM#TRPBF vs LM1086CSX-ADJ |
| LT1086CM#TR | Analog Devices Inc | Check for Price | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 | LT1086IM#TRPBF vs LT1086CM#TR |
LT1086IM#TRPBF Frequently Asked Questions (FAQ)
-
The maximum input voltage is 15V, but it's recommended to keep it below 12V for optimal performance and to prevent overheating.
-
To ensure stability, use a minimum output capacitance of 10uF with an ESR (Equivalent Series Resistance) of 0.05 ohms or less, and a minimum input capacitance of 1uF with an ESR of 0.1 ohms or less.
-
The maximum output current is 1.5A, but it's recommended to derate the output current based on the input voltage and ambient temperature to prevent overheating.
-
Use a heat sink with a thermal resistance of 10°C/W or less, and ensure good airflow around the device. Also, derate the output current based on the ambient temperature and input voltage.
-
The LT1086IM#TRPBF is rated for operation up to 125°C, but the output current and input voltage should be derated based on the ambient temperature to prevent overheating.