Part Details for LT1086CM#TRPBF by Linear Technology
Results Overview of LT1086CM#TRPBF by Linear Technology
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LT1086CM#TRPBF Information
LT1086CM#TRPBF by Linear Technology is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LT1086CM#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 22 |
|
RFQ | ||
|
|
Quest Components | 16 |
|
$15.9707 / $19.4238 | Buy Now | |
|
|
Vyrian | Regulators | 2278 |
|
RFQ | |
|
|
Win Source Electronics | IC REG LDO ADJ 1.5A D2PAK | 9290 |
|
$7.3150 / $9.4485 | Buy Now |
Part Details for LT1086CM#TRPBF
LT1086CM#TRPBF CAD Models
LT1086CM#TRPBF Part Data Attributes
|
|
LT1086CM#TRPBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1086CM#TRPBF
Linear Technology
LT1086 - 1.5A Low Dropout Positive Regulators Adjustable and Fixed 2.85V, 3.3V, 3.6V, 5V, 12V; Package: DD PAK; Pins: 3; Temperature Range: 0°C to 70°C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | D2PAK | |
| Package Description | LEAD FREE, PLASTIC, D2PAK-3 | |
| Pin Count | 3 | |
| Manufacturer Package Code | M | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Adjustability | ADJUSTABLE | |
| Dropout Voltage1-Max | 1.5 V | |
| Dropout Voltage1-Nom | 1.3 V | |
| Input-Output Voltage Differential-Max | 15 V | |
| Input-Output Voltage Differential-Min | 1.5 V | |
| JESD-30 Code | R-PSSO-G3 | |
| JESD-609 Code | e3 | |
| Length | 10.2235 mm | |
| Line Regulation-Max (%/V) | 0.015 | |
| Load Regulation-Max(%) | 0.4% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 3 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | ||
| Output Current1-Max | 1.5 A | |
| Output Voltage1-Max | 15 V | |
| Output Voltage1-Min | 1.2 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TO-263 | |
| Package Equivalence Code | SMSIP3H,.55TB | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 4.877 mm | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | SINGLE | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 8.89 mm |
Alternate Parts for LT1086CM#TRPBF
This table gives cross-reference parts and alternative options found for LT1086CM#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1086CM#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LM1086IS-ADJ/NOPB | Texas Instruments | $1.3665 | 1.5-A, 29-V, linear voltage regulator 3-DDPAK/TO-263 -40 to 125 | LT1086CM#TRPBF vs LM1086IS-ADJ/NOPB |
| LM1086CS-ADJ/NOPB | Texas Instruments | $1.8296 | 1.5-A, 29-V, linear voltage regulator 3-DDPAK/TO-263 0 to 125 | LT1086CM#TRPBF vs LM1086CS-ADJ/NOPB |
| LM1086IS-ADJ/NOPB | National Semiconductor Corporation | Check for Price | IC VREG 1.2 V-15 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, ROHS COMPLIANT, TO-263, 3 PIN, Adjustable Positive Single Output LDO Regulator | LT1086CM#TRPBF vs LM1086IS-ADJ/NOPB |
| LM1086CSX-ADJ/NOPB | National Semiconductor Corporation | Check for Price | IC VREG 1.2 V-15 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSSO3, ROHS COMPLIANT, TO-263, 3 PIN, Adjustable Positive Single Output LDO Regulator | LT1086CM#TRPBF vs LM1086CSX-ADJ/NOPB |
| LT1086CM#TR | Linear Technology | Check for Price | LT1086 - 1.5A Low Dropout Positive Regulators Adjustable and Fixed 2.85V, 3.3V, 3.6V, 5V, 12V; Package: DD PAK; Pins: 3; Temperature Range: 0°C to 70°C | LT1086CM#TRPBF vs LT1086CM#TR |
LT1086CM#TRPBF Frequently Asked Questions (FAQ)
-
The maximum input voltage for the LT1086CM is 15V, but it's recommended to keep it below 12V for optimal performance and to prevent overheating.
-
To ensure a stable and accurate output voltage, make sure to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a minimum capacitance of 10uF. Also, keep the input voltage ripple low and use a good quality input capacitor.
-
The minimum input voltage required for the LT1086CM to function properly is 7.2V, but it's recommended to keep it above 8V for optimal performance.
-
To calculate the power dissipation of the LT1086CM, use the formula: Pd = (Vin - Vout) x Iout, where Vin is the input voltage, Vout is the output voltage, and Iout is the output current.
-
The maximum output current that the LT1086CM can provide is 3A, but it's recommended to keep it below 2.5A for optimal performance and to prevent overheating.