Part Details for LT1083CP by Linear Technology
Results Overview of LT1083CP by Linear Technology
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (9 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Renewable Energy
LT1083CP Information
LT1083CP by Linear Technology is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for LT1083CP
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1 |
|
RFQ | ||
|
|
Quest Components | IC,VOLT REGULATOR,ADJUSTABLE,+1.2 TO +29V,BIPOLAR,SIP,3PIN,PLASTIC | 1 |
|
$20.8350 | Buy Now |
|
|
Component Electronics, Inc | IN STOCK SHIP TODAY | 1 |
|
$7.5000 / $11.5400 | Buy Now |
|
|
Vyrian | Regulators | 1532 |
|
RFQ |
Part Details for LT1083CP
LT1083CP CAD Models
LT1083CP Part Data Attributes
|
|
LT1083CP
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1083CP
Linear Technology
IC VREG 1.2 V-15 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSFM3, PLASTIC, TO-247, TO-3P, 3 PIN, Adjustable Positive Single Output LDO Regulator
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | TO-3P | |
| Package Description | PLASTIC, TO-247, TO-3P, 3 PIN | |
| Pin Count | 3 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Adjustability | ADJUSTABLE | |
| Dropout Voltage1-Max | 1.5 V | |
| Dropout Voltage1-Nom | 1.3 V | |
| Input-Output Voltage Differential-Max | 25 V | |
| Input-Output Voltage Differential-Min | 1.5 V | |
| JESD-30 Code | R-PSFM-T3 | |
| JESD-609 Code | e0 | |
| Line Regulation-Max (%/V) | 0.033 | |
| Load Regulation-Max(%) | 0.4% | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 3 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | ||
| Output Current1-Max | 7.5 A | |
| Output Voltage1-Max | 15 V | |
| Output Voltage1-Min | 1.2 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SFM | |
| Package Equivalence Code | SIP3,.1,215 | |
| Package Shape | RECTANGULAR | |
| Package Style | FLANGE MOUNT | |
| Peak Reflow Temperature (Cel) | 235 | |
| Qualification Status | Not Qualified | |
| Regulator Type | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Terminal Finish | Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 5.5 mm | |
| Terminal Position | SINGLE | |
| Time@Peak Reflow Temperature-Max (s) | 20 |
Alternate Parts for LT1083CP
This table gives cross-reference parts and alternative options found for LT1083CP. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1083CP, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MIC29752WWT | Microchip Technology Inc | $17.6883 | 1.25 V-25V ADJUSTABLE POSITIVE LDO REGULATOR, 0.75V DROPOUT, SFM5 | LT1083CP vs MIC29752WWT |
| MIC29752WWT | Micrel Inc | $8.2364 | Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.75V Dropout, BIPolar, ROHS COMPLIANT, TO-247, 5 PIN | LT1083CP vs MIC29752WWT |
| FT1083CP | Force Technologies Ltd | Check for Price | Adjustable Positive LDO Regulator, 1.5V Dropout, PSFM3, PLASTIC, TO-3P, 3 PIN | LT1083CP vs FT1083CP |
| LT1083CP#PBF | Linear Technology | Check for Price | IC VREG 1.2 V-15 V ADJUSTABLE POSITIVE LDO REGULATOR, 1.5 V DROPOUT, PSFM3, LEAD FREE, PLASTIC, TO-247, TO-3P, 3 PIN, Adjustable Positive Single Output LDO Regulator | LT1083CP vs LT1083CP#PBF |
| MIC29752BWT | Rochester Electronics LLC | Check for Price | Adjustable Positive LDO Regulator, | LT1083CP vs MIC29752BWT |
| MIC29752WWT-TR | Microchip Technology Inc | Check for Price | 1.25 V-25V ADJUSTABLE POSITIVE LDO REGULATOR, 0.75V DROPOUT, SFM5 | LT1083CP vs MIC29752WWT-TR |
| MIC29752WWTTR | Microchip Technology Inc | Check for Price | 1.25 V-25V ADJUSTABLE POSITIVE LDO REGULATOR, 0.75V DROPOUT, SFM5, ROHS COMPLIANT, TO-247, 5 PIN | LT1083CP vs MIC29752WWTTR |
| MIC29752WWT | Rochester Electronics LLC | Check for Price | Adjustable Positive LDO Regulator, | LT1083CP vs MIC29752WWT |
| MIC29752WWTTR | Micrel Inc | Check for Price | 1.25 V-25V ADJUSTABLE POSITIVE LDO REGULATOR, 0.75V DROPOUT, SFM5, ROHS COMPLIANT, TO-247, 5 PIN | LT1083CP vs MIC29752WWTTR |
LT1083CP Frequently Asked Questions (FAQ)
-
The LT1083CP can handle input voltages up to 30V, but it's recommended to keep the input voltage at least 2V above the output voltage to ensure proper regulation.
-
To ensure stability, use a minimum output capacitance of 10uF with an ESR (Equivalent Series Resistance) of 0.05 ohms or less, and keep the input capacitance to a minimum (less than 1uF).
-
The dropout voltage of the LT1083CP is typically around 1.5V, which means the input voltage must be at least 1.5V above the output voltage to maintain regulation.
-
The LT1083CP is rated for operation up to 125°C, but its performance may degrade at high temperatures. Be sure to derate the output current and consider using a heat sink if operating in a high-temperature environment.
-
Use a TVS (Transient Voltage Suppressor) diode or a voltage clamp at the input to protect the LT1083CP from voltage surges or spikes. You can also add a series resistor and capacitor to filter out high-frequency noise.