Part Details for LT1014ISW#TRPBF by Analog Devices Inc
Results Overview of LT1014ISW#TRPBF by Analog Devices Inc
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LT1014ISW#TRPBF Information
LT1014ISW#TRPBF by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1014ISW#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
50AK4503
|
Newark | Op-Amp, -40 To 85Deg C, Wsoic, No. Of Channels:4Channels, Gain Bandwidth Product:-, Supply Voltage Range:± 2V To ± 18V, Ic Case/Package:Wsoic, No. Of Pins:16Pins, Amplifier Type:General Purpose, Rail To Rail:-, Product Range:- Rohs Compliant: Yes |Analog Devices LT1014ISW#TRPBF RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 0 |
|
$7.1000 / $13.8000 | Buy Now |
|
DISTI #
505-LT1014ISW#TRPBFCT-ND
|
DigiKey | IC OPAMP GP 4 CIRCUIT 16SO Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) | Temporarily Out of Stock |
|
$7.0375 / $13.8000 | Buy Now |
|
DISTI #
584-LT1014ISW#TRPBF
|
Mouser Electronics | Precision Amplifiers 4x Prec Op Amp RoHS: Compliant | 4 |
|
$7.5600 / $14.4500 | Buy Now |
|
|
Analog Devices Inc | 4x Prec Op Amp Min Qty: 1000 Package Multiple: 1000 | 0 |
|
$7.0375 / $13.8000 | Buy Now |
|
|
Bristol Electronics | 15 |
|
RFQ | ||
|
DISTI #
LT1014ISW#TRPBF
|
Richardson RFPD | AMPLIFIER - OP AMPS RoHS: Compliant Min Qty: 1000 | 0 |
|
$7.2700 / $7.5600 | Buy Now |
Part Details for LT1014ISW#TRPBF
LT1014ISW#TRPBF CAD Models
LT1014ISW#TRPBF Part Data Attributes
|
|
LT1014ISW#TRPBF
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
LT1014ISW#TRPBF
Analog Devices Inc
Quad Precision Op Amp
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | 0.300 INCH, LEAD FREE, PLASTIC, SOP-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 05-08-1620 (SW16) | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Average Bias Current-Max (IIB) | 0.038 µA | |
| Common-mode Reject Ratio-Nom | 113 dB | |
| Input Offset Voltage-Max | 400 µV | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 10.3 mm | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -22 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 4 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP16,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.642 mm | |
| Slew Rate-Nom | 0.4 V/us | |
| Supply Voltage Limit-Max | 22 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 7.493 mm |
Alternate Parts for LT1014ISW#TRPBF
This table gives cross-reference parts and alternative options found for LT1014ISW#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1014ISW#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1014DIDWR | Texas Instruments | $2.9051 | Low Power, 5V-44V wide supply range, quad operational amplifier 16-SOIC -40 to 105 | LT1014ISW#TRPBF vs LT1014DIDWR |
| LT1014ISW#TRPBF | Linear Technology | Check for Price | LT1014 - Quad Precision Op Amp; Package: SO; Pins: 16; Temperature Range: -40°C to 85°C | LT1014ISW#TRPBF vs LT1014ISW#TRPBF |
| MXL1014IS | Maxim Integrated Products | Check for Price | Operational Amplifier, 4 Func, 1000uV Offset-Max, BIPolar, PDSO16, SOP-16 | LT1014ISW#TRPBF vs MXL1014IS |
| LT1014ISW#TR | Analog Devices Inc | Check for Price | Operational Amplifier, 4 Func, 400uV Offset-Max, BIPolar, PDSO16 | LT1014ISW#TRPBF vs LT1014ISW#TR |
| LT1014DIDWRG4 | Texas Instruments | Check for Price | Quad Precision Operational Amplifier 16-SOIC -40 to 105 | LT1014ISW#TRPBF vs LT1014DIDWRG4 |
| LT1014ISW#TR | Linear Technology | Check for Price | LT1014 - Quad Precision Op Amp; Package: SO; Pins: 16; Temperature Range: -40°C to 85°C | LT1014ISW#TRPBF vs LT1014ISW#TR |
| FT1014ISW | Force Technologies Ltd | Check for Price | Operational Amplifier, 4 Func, 800uV Offset-Max, PDSO16, PLASTIC, SOP-16 | LT1014ISW#TRPBF vs FT1014ISW |
LT1014ISW#TRPBF Frequently Asked Questions (FAQ)
-
A good PCB layout for the LT1014 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
-
To ensure stability in high-gain configurations, it's essential to use a compensation capacitor (Cc) between pins 5 and 6. The value of Cc depends on the gain and bandwidth requirements. A good starting point is 10-22pF.
-
The maximum power dissipation of the LT1014 is 1.4W. To calculate the power dissipation, use the formula: Pd = (Vin - Vout) x Iout + Vout x Iq, where Vin is the input voltage, Vout is the output voltage, Iout is the output current, and Iq is the quiescent current.
-
Yes, the LT1014 can be used as a unity-gain buffer. However, it's essential to ensure that the input impedance is high enough to avoid loading the input signal. A buffer configuration also requires careful attention to PCB layout and decoupling to prevent oscillations.
-
To protect the LT1014 from overvoltage and ESD, use a voltage clamp or a transient voltage suppressor (TVS) diode at the input. Additionally, follow proper ESD handling and storage procedures to prevent damage during manufacturing and assembly.