-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LM833N by Texas Instruments
Results Overview of LM833N by Texas Instruments
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM833N Information
LM833N by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for LM833N
LM833N CAD Models
LM833N Part Data Attributes
|
|
LM833N
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
LM833N
Texas Instruments
2 CHANNEL, AUDIO AMPLIFIER, PDIP8, PLASTIC, DIP-8
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | DIP | |
| Package Description | DIP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e0 | |
| Length | 9.817 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Seated Height-Max | 5.08 mm | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Width | 7.62 mm |
LM833N Frequently Asked Questions (FAQ)
-
The maximum power supply voltage that can be applied to the LM833N is 22V. Exceeding this voltage can cause damage to the device.
-
Yes, the LM833N can be used as a single-supply op-amp, but it requires a voltage divider to set the input common-mode voltage to half the supply voltage. Additionally, the output voltage swing will be limited to about 1.5V below the positive supply rail.
-
The gain resistors for the LM833N should be chosen based on the desired gain and bandwidth. A good starting point is to use 1kΩ to 10kΩ resistors for gains up to 100. For higher gains, use smaller resistors. Also, consider the noise bandwidth and input impedance when selecting the resistors.
-
The maximum output current that the LM833N can provide is 50mA. Exceeding this current can cause the device to overheat or become unstable.
-
Yes, the LM833N is suitable for audio applications due to its low noise, high gain bandwidth, and low distortion. However, it may not be the best choice for high-fidelity audio applications due to its limited output voltage swing and slew rate.