Part Details for LM4864MM by Texas Instruments
Results Overview of LM4864MM by Texas Instruments
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Price & Stock for LM4864MM
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
296-LM4864MMCT-ND
|
DigiKey | IC AMP CLSS AB MONO 675MW 8VSSOP Min Qty: 1 Lead time: 6 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
1885 In Stock |
|
$0.8723 / $1.8000 | Buy Now |
|
DISTI #
926-LM4864MM
|
Mouser Electronics | Audio Amplifiers 725-mW mono analog input Class-AB aud A 926-LM4864MM/NOPB RoHS: Not Compliant | 1663 |
|
$0.8490 / $1.8000 | Buy Now |
|
DISTI #
85991550
|
Verical | Audio Amp Speaker 1-CH Mono Class-AB 8-Pin VSSOP T/R RoHS: Not Compliant Min Qty: 271 Package Multiple: 1 Date Code: 1401 | Americas - 16707 |
|
$0.8570 / $1.3875 | Buy Now |
|
DISTI #
85990517
|
Verical | Audio Amp Speaker 1-CH Mono Class-AB 8-Pin VSSOP T/R RoHS: Not Compliant Min Qty: 271 Package Multiple: 1 Date Code: 1101 | Americas - 9669 |
|
$0.8570 / $1.3875 | Buy Now |
|
|
Rochester Electronics | LM4864 300 mW Audio Power Amplifier with Shutdown Mode RoHS: Not Compliant Status: Active Min Qty: 1 | 26376 |
|
$0.6856 / $1.1100 | Buy Now |
|
|
LCSC | Monaural 675mWx18 VSSOP-8 Audio Amplifiers | 100 |
|
$1.8223 / $2.6896 | Buy Now |
Part Details for LM4864MM
LM4864MM CAD Models
LM4864MM Part Data Attributes
|
|
LM4864MM
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
LM4864MM
Texas Instruments
725-mW, mono, analog input, Class-AB audio amplifier 8-VSSOP -40 to 85
|
| Pbfree Code | Yes | |
| Rohs Code | No | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | MSOP | |
| Package Description | 0.118 INCH, MSOP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Bandwidth-Nom | 20 kHz | |
| Consumer IC Type | AUDIO AMPLIFIER | |
| Harmonic Distortion | 1% | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 3 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Power-Nom | 0.85 W | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.09 mm | |
| Supply Current-Max | 6 mA | |
| Supply Voltage-Max (Vsup) | 5.5 V | |
| Supply Voltage-Min (Vsup) | 2.7 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Width | 3 mm |
Alternate Parts for LM4864MM
This table gives cross-reference parts and alternative options found for LM4864MM. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LM4864MM, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| PAM8304AYR | Diodes Incorporated | $0.4798 | Audio Amplifier, 3W, 1 Channel(s), 1 Func, CMOS, PDSO8, DFN-8 | LM4864MM vs PAM8304AYR |
| LM4864MM/NOPB | Texas Instruments | $0.5847 | 725-mW, mono, analog input, Class-AB audio amplifier 8-VSSOP -40 to 85 | LM4864MM vs LM4864MM/NOPB |
| LM4864MMX | Texas Instruments | Check for Price | 0.55W, 1 CHANNEL, AUDIO AMPLIFIER, PDSO8, 0.118 INCH, MSOP-8 | LM4864MM vs LM4864MMX |
| LM4864MM/NOPB | National Semiconductor Corporation | Check for Price | IC 0.55 W, 1 CHANNEL, AUDIO AMPLIFIER, PDSO8, 0.118 INCH, MSOP-8, Audio/Video Amplifier | LM4864MM vs LM4864MM/NOPB |
| IS31AP2005-GRLS2-TR | Lumissil Microsystems | Check for Price | Audio Amplifier, | LM4864MM vs IS31AP2005-GRLS2-TR |
LM4864MM Frequently Asked Questions (FAQ)
-
A good PCB layout for the LM4864MM involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended.
-
The choice of gain resistors depends on the desired gain and input impedance. A higher gain resistor value will result in a higher gain, but may also increase noise and distortion. A good starting point is to use the recommended values in the datasheet, and then adjust based on the specific application requirements.
-
The maximum power dissipation of the LM4864MM is dependent on the ambient temperature and the thermal resistance of the package. According to the datasheet, the maximum power dissipation is 1.4W at 25°C ambient temperature. However, this can be derated based on the actual operating conditions.
-
Yes, the LM4864MM can be used in a single-supply configuration. However, this will affect the output voltage swing and the input common-mode range. The datasheet provides guidance on how to configure the device for single-supply operation.
-
The LM4864MM has a built-in filter capacitor, but additional filtering may be required depending on the application. A simple RC filter or a more complex active filter can be used to filter out noise and ripple. The choice of filter depends on the frequency range of interest and the desired attenuation.