-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Automotive low-voltage commodity comparator 8-TSSOP -40 to 125
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM393LVQPWRQ1 by Texas Instruments is a Comparator.
Comparators are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
DISTI #
296-LM393LVQPWRQ1CT-ND
|
DigiKey | IC COMPARATOR 2 GEN PUR 8TSSOP Min Qty: 1 Lead time: 6 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
1481 In Stock |
|
$0.1562 / $0.4400 | Buy Now |
DISTI #
595-LM393LVQPWRQ1
|
Mouser Electronics | Analog Comparators Automotive low-volta ge commodity compara RoHS: Compliant | 2495 |
|
$0.1560 / $0.4400 | Buy Now |
|
Vyrian | Amplifiers | 3268 |
|
RFQ |
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
|
LM393LVQPWRQ1
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
LM393LVQPWRQ1
Texas Instruments
Automotive low-voltage commodity comparator 8-TSSOP -40 to 125
|
Pbfree Code | Yes | |
Rohs Code | Yes | |
Part Life Cycle Code | Active | |
Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
Package Description | TSSOP-8 | |
Reach Compliance Code | compliant | |
Samacsys Manufacturer | Texas Instruments | |
Amplifier Type | COMPARATOR | |
Bias Current-Max (IIB) @25C | 0.000005 µA | |
Input Offset Voltage-Max | 2000 µV | |
JESD-30 Code | R-PDSO-G8 | |
JESD-609 Code | e4 | |
Length | 4.4 mm | |
Moisture Sensitivity Level | 1 | |
Number of Functions | 2 | |
Number of Terminals | 8 | |
Operating Temperature-Max | 125 °C | |
Operating Temperature-Min | -40 °C | |
Output Type | OPEN-DRAIN | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | TSSOP | |
Package Equivalence Code | TSSOP8,.25 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
Packing Method | TR, 13 INCH | |
Peak Reflow Temperature (Cel) | 260 | |
Response Time-Nom | 600 ns | |
Screening Level | AEC-Q100 | |
Seated Height-Max | 1.2 mm | |
Supply Current-Max | 0.1 mA | |
Supply Voltage Limit-Max | 6 V | |
Supply Voltage-Nom (Vsup) | 5 V | |
Surface Mount | YES | |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | |
Terminal Form | GULL WING | |
Terminal Pitch | 0.65 mm | |
Terminal Position | DUAL | |
Width | 3 mm |
The recommended operating voltage range for the LM393LVQPWRQ1 is 2.7V to 5.5V, although it can operate down to 2.3V with reduced performance.
To ensure the output of the LM393LVQPWRQ1 is stable, make sure to decouple the power supply pins with a 0.1uF capacitor, and use a pull-up or pull-down resistor on the output pin to prevent floating.
The maximum input voltage that can be applied to the LM393LVQPWRQ1 without damaging the device is 6.5V, although it's recommended to keep the input voltage within the recommended operating voltage range for optimal performance.
Yes, the LM393LVQPWRQ1 can be used as a comparator with hysteresis by adding an external resistor and capacitor network to create a Schmitt trigger circuit.
The typical propagation delay of the LM393LVQPWRQ1 is around 1.3us, although this can vary depending on the operating voltage and temperature.