Part Details for LM358DR2 by onsemi
Results Overview of LM358DR2 by onsemi
- Distributor Offerings: (8 listings)
- Number of FFF Equivalents: (7 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM358DR2 Information
LM358DR2 by onsemi is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LM358DR2
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
LM358DR2
|
Avnet Americas | - Tape and Reel (Alt: LM358DR2) RoHS: Not Compliant Min Qty: 5000 Package Multiple: 2500 Lead time: 111 Weeks, 0 Days Container: Reel | 0 |
|
RFQ | |
|
|
Bristol Electronics | 2400 |
|
RFQ | ||
|
|
Bristol Electronics | 1015 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,8PIN,PLASTIC | 3472 |
|
$0.0741 / $0.1710 | Buy Now |
|
|
Quest Components | IC,OP-AMP,DUAL,BIPOLAR,SOP,8PIN,PLASTIC | 1576 |
|
$0.1710 / $0.5700 | Buy Now |
|
|
ComSIT USA | Electronic Component RoHS: Not Compliant |
|
|
RFQ | |
|
|
Cytech Systems Limited | IC OPAMP DUAL LOW POWER 8SOIC | 3750 |
|
RFQ | |
|
|
Win Source Electronics | DUAL DIFFERENTIAL INPUT OPERATIONAL AMPLIFIERS | IC OPAMP GP 2 CIRCUIT 8SOIC | 512230 |
|
$0.0260 / $0.0335 | Buy Now |
Part Details for LM358DR2
LM358DR2 CAD Models
LM358DR2 Part Data Attributes
|
|
LM358DR2
onsemi
Buy Now
Datasheet
|
Compare Parts:
LM358DR2
onsemi
Operational Amplifier, Single Supply, Dual, SOIC-8 Narrow Body, 2500-REEL
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ONSEMI | |
| Part Package Code | SOIC | |
| Package Description | SOIC-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 751-07 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Factory Lead Time | 111 Weeks | |
| Samacsys Manufacturer | onsemi | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.5 µA | |
| Bias Current-Max (IIB) @25C | 0.25 µA | |
| Common-mode Reject Ratio-Min | 65 dB | |
| Common-mode Reject Ratio-Nom | 70 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 9000 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Low-Bias | NO | |
| Low-Offset | NO | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage-Nom (Vsup) | ||
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 235 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 3 mA | |
| Supply Voltage Limit-Max | 32 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Gain-Min | 15000 | |
| Wideband | NO | |
| Width | 3.9 mm |
Alternate Parts for LM358DR2
This table gives cross-reference parts and alternative options found for LM358DR2. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LM358DR2, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| KA358D | Fairchild Semiconductor Corporation | Check for Price | Operational Amplifier, 2 Func, 9000uV Offset-Max, BIPolar, PDSO8, SOIC-8 | LM358DR2 vs KA358D |
| KA358DTF | onsemi | Check for Price | Dual Operational Amplifier, SOIC-8, 3000-REEL | LM358DR2 vs KA358DTF |
| LM358M | National Semiconductor Corporation | Check for Price | IC DUAL OP-AMP, 9000 uV OFFSET-MAX, 1 MHz BAND WIDTH, PDSO8, SOIC-8, Operational Amplifier | LM358DR2 vs LM358M |
| LM358M/NOPB | National Semiconductor Corporation | Check for Price | IC DUAL OP-AMP, 9000 uV OFFSET-MAX, 1 MHz BAND WIDTH, PDSO8, SOIC-8, Operational Amplifier | LM358DR2 vs LM358M/NOPB |
| LM358M | Rochester Electronics LLC | Check for Price | DUAL OP-AMP, 9000uV OFFSET-MAX, PDSO8, SOP-8 | LM358DR2 vs LM358M |
| LM358D | Motorola Mobility LLC | Check for Price | DUAL OP-AMP, 7000uV OFFSET-MAX, 1MHz BAND WIDTH, PDSO8, PLASTIC, SO-8 | LM358DR2 vs LM358D |
| KA358DTF | Fairchild Semiconductor Corporation | Check for Price | Operational Amplifier, 2 Func, 9000uV Offset-Max, BIPolar, PDSO8, SOIC-8 | LM358DR2 vs KA358DTF |
LM358DR2 Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the LM358DR2 is dependent on the package type and ambient temperature. For the SOIC-8 package, the maximum power dissipation is 640mW at 25°C. However, it's recommended to derate the power dissipation to ensure reliable operation.
-
While the LM358DR2 is an op-amp, it can be used as a comparator in a pinch. However, it's not recommended as it's not optimized for comparator applications. The LM358DR2 has a relatively slow slew rate and limited output current, which may not be suitable for high-speed comparator applications. A dedicated comparator like the LM339 or LM2901 would be a better choice.
-
The input impedance of the LM358DR2 is typically around 2MΩ, but it can vary depending on the specific application and operating conditions. It's recommended to consult the datasheet and application notes for more information on input impedance and how it affects circuit performance.
-
Yes, the LM358DR2 can be used in a single-supply configuration. However, the input common-mode voltage range is limited to within 1.5V of the positive supply rail, so the input signal should be biased accordingly. Additionally, the output voltage swing will be limited to within 1.5V of the positive supply rail, so the output stage should be designed to accommodate this limitation.
-
The LM358DR2 has a relatively high input voltage noise density of 35nV/√Hz at 1kHz, which can affect circuit noise performance. However, the noise performance can be improved by using a noise-reducing circuit topology, such as a differential amplifier or a chopper-stabilized amplifier. Additionally, the noise performance can be improved by using a lower-noise op-amp, such as the OP07 or OP27.