-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LM358DGKRG4 by Texas Instruments
Results Overview of LM358DGKRG4 by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM358DGKRG4 Information
LM358DGKRG4 by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LM358DGKRG4
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 807 |
|
RFQ | |
|
|
Win Source Electronics | IC OPAMP GP 700KHZ 8VSSOP | 315000 |
|
$0.0785 / $0.1178 | Buy Now |
Part Details for LM358DGKRG4
LM358DGKRG4 CAD Models
LM358DGKRG4 Part Data Attributes
|
|
LM358DGKRG4
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
LM358DGKRG4
Texas Instruments
Dual, 30-V, 700-kHz operational amplifier 8-VSSOP 0 to 70
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | MSOP | |
| Package Description | VSSOP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Date Of Intro | 1989-03-01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.5 µA | |
| Bias Current-Max (IIB) @25C | 0.25 µA | |
| Common-mode Reject Ratio-Min | 65 dB | |
| Common-mode Reject Ratio-Nom | 80 dB | |
| Frequency Compensation | YES | |
| Input Offset Current-Max (IIO) | 0.05 µA | |
| Input Offset Voltage-Max | 9000 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Length | 3 mm | |
| Low-Bias | NO | |
| Low-Offset | NO | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.11 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 0.3 V/us | |
| Supply Current-Max | 2 mA | |
| Supply Voltage Limit-Max | 32 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | NICKEL PALLADIUM GOLD SILVER | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 700 | |
| Voltage Gain-Min | 25000 | |
| Wideband | NO | |
| Width | 3 mm |
Alternate Parts for LM358DGKRG4
This table gives cross-reference parts and alternative options found for LM358DGKRG4. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LM358DGKRG4, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LM358DGKR | Texas Instruments | $0.1069 | Dual, 30-V, 700-kHz operational amplifier 8-VSSOP 0 to 70 | LM358DGKRG4 vs LM358DGKR |
LM358DGKRG4 Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the LM358DGKRG4 is 670mW, which is calculated based on the maximum junction temperature (150°C) and the thermal resistance from junction to ambient (125°C/W).
-
While the LM358DGKRG4 can be used as a comparator, it's not the best choice due to its limited slew rate (0.5V/μs) and bandwidth (1MHz). TI recommends using a dedicated comparator like the LM339 or LM2903 for comparator applications.
-
To ensure stability, make sure to follow proper PCB layout practices, use a bypass capacitor (e.g., 10nF) between the supply pins, and avoid using long wires or traces that can introduce parasitic inductance. Additionally, consider adding a compensation capacitor (e.g., 10pF) between the output and the inverting input.
-
The input impedance of the LM358DGKRG4 is typically around 2MΩ, but it can vary depending on the specific application and operating conditions. This is relatively low compared to other op-amps, so it's essential to consider the input impedance when designing your circuit.
-
Yes, the LM358DGKRG4 can be used in a single-supply configuration, but you'll need to ensure that the input common-mode voltage range is within the specified limits (typically 0V to VCC-1.5V). You may also need to add a voltage divider or level shifter to adjust the input signal to the correct voltage range.