Part Details for LM358D-JF by Texas Instruments
Results Overview of LM358D-JF by Texas Instruments
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM358D-JF Information
LM358D-JF by Texas Instruments is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LM358D-JF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
86121083
|
Verical | Industry-Standard Dual Operational Amplifier Min Qty: 1747 Package Multiple: 1 Date Code: 0701 | Americas - 14175 |
|
$0.2148 | Buy Now |
|
|
Rochester Electronics | LM358 Dual standard operational amplifier RoHS: Compliant Status: Obsolete Min Qty: 1 | 14175 |
|
$0.1065 / $0.1718 | Buy Now |
Part Details for LM358D-JF
LM358D-JF CAD Models
LM358D-JF Part Data Attributes
|
|
LM358D-JF
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
LM358D-JF
Texas Instruments
Dual, 30-V, 700-kHz operational amplifier 8-SOIC 0 to 70
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Package Description | SOIC-8 | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Texas Instruments | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.5 µA | |
| Bias Current-Max (IIB) @25C | 0.25 µA | |
| Common-mode Reject Ratio-Min | 65 dB | |
| Common-mode Reject Ratio-Nom | 80 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 9000 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Length | 4.9 mm | |
| Low-Bias | NO | |
| Low-Offset | NO | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.24 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUT LINE | |
| Packing Method | TUBE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Seated Height-Max | 1.75 mm | |
| Slew Rate-Nom | 0.3 V/us | |
| Supply Current-Max | 2 mA | |
| Supply Voltage Limit-Max | 32 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 700 | |
| Voltage Gain-Min | 15000 | |
| Wideband | NO | |
| Width | 3.9 mm |
LM358D-JF Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the LM358D-JF is dependent on the package type and ambient temperature. For the SOIC package, the maximum power dissipation is 670mW at 25°C. However, it's recommended to derate the power dissipation to 500mW or less to ensure reliable operation.
-
While the LM358D-JF can be used as a comparator, it's not the best choice due to its relatively slow slew rate (0.5V/μs) and limited bandwidth (1MHz). TI recommends using a dedicated comparator like the LM339 or LM2903 for comparator applications.
-
To ensure stability, it's essential to follow proper PCB layout practices, such as keeping the input and output traces short and away from each other, using a solid ground plane, and decoupling the power supply with capacitors. Additionally, consider adding a compensation capacitor (e.g., 10nF to 100nF) between the output and the inverting input to improve stability.
-
The input impedance of the LM358D-JF is typically around 2MΩ to 5MΩ, depending on the specific application and operating conditions. This is relatively high, making the LM358D-JF suitable for high-impedance sources.
-
Yes, the LM358D-JF can be used in a single-supply configuration, but it's essential to ensure that the input common-mode voltage range is within the specified limits (typically 0V to VCC-1.5V). Additionally, consider using a voltage divider or level-shifter to bias the input signals to the correct voltage range.