Part Details for LM324PWR by ROHM Semiconductor
Results Overview of LM324PWR by ROHM Semiconductor
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM324PWR Information
LM324PWR by ROHM Semiconductor is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LM324PWR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 1889 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,QUAD,BIPOLAR,TSSOP,14PIN,PLASTIC | 1511 |
|
$0.1644 / $0.5480 | Buy Now |
Part Details for LM324PWR
LM324PWR CAD Models
LM324PWR Part Data Attributes
|
|
LM324PWR
ROHM Semiconductor
Buy Now
Datasheet
|
Compare Parts:
LM324PWR
ROHM Semiconductor
Operational Amplifier, 4 Func, 9000uV Offset-Max, BIPolar, PDSO14, ROHS COMPLIANT, TSSOP-14
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ROHM CO LTD | |
| Part Package Code | TSSOP | |
| Package Description | TSSOP-14 | |
| Pin Count | 14 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | ROHM Semiconductor | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.5 µA | |
| Bias Current-Max (IIB) @25C | 0.25 µA | |
| Common-mode Reject Ratio-Min | 65 dB | |
| Common-mode Reject Ratio-Nom | 80 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 9000 µV | |
| JESD-30 Code | R-PDSO-G14 | |
| JESD-609 Code | e2 | |
| Length | 5 mm | |
| Low-Bias | NO | |
| Low-Offset | NO | |
| Micropower | NO | |
| Number of Functions | 4 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TR, EMBOSSED | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.2 mm | |
| Slew Rate-Nom | 0.5 V/us | |
| Supply Current-Max | 3 mA | |
| Supply Voltage Limit-Max | 32 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Tin/Copper (Sn/Cu) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 1200 | |
| Voltage Gain-Min | 25000 | |
| Wideband | NO | |
| Width | 4.4 mm |
Alternate Parts for LM324PWR
This table gives cross-reference parts and alternative options found for LM324PWR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LM324PWR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LM324PWRG3 | Texas Instruments | $0.1180 | Quad 30-V 1.2-MHz operational amplifier 14-TSSOP 0 to 70 | LM324PWR vs LM324PWRG3 |
| LM324PW | Texas Instruments | Check for Price | Quad 30-V 1.2-MHz operational amplifier 14-TSSOP 0 to 70 | LM324PWR vs LM324PW |
| LM324PWRG4 | Texas Instruments | Check for Price | Quad 30-V 1.2-MHz operational amplifier 14-TSSOP 0 to 70 | LM324PWR vs LM324PWRG4 |
| LM324PWG4 | Texas Instruments | Check for Price | Quadruple Operational Amplifier 14-TSSOP 0 to 70 | LM324PWR vs LM324PWG4 |
| LM324KPWRE4 | Texas Instruments | Check for Price | Quadruple Operational Amplifier 14-TSSOP 0 to 70 | LM324PWR vs LM324KPWRE4 |
| LM324KPW | Texas Instruments | Check for Price | Quad, 30-V 1.2-MHz improved ESD (2 kV) operational amplifier 14-TSSOP 0 to 70 | LM324PWR vs LM324KPW |
LM324PWR Frequently Asked Questions (FAQ)
-
The maximum power dissipation of the LM324PWR is 670mW when mounted on a 4-layer PCB with a copper area of 1in².
-
To ensure stability, it is recommended to use a compensation capacitor (typically 10-100nF) between the output and the inverting input, and to minimize the stray capacitance at the inverting input.
-
The recommended operating voltage range for the LM324PWR is 3V to 32V, with a maximum rating of 36V.
-
Yes, the LM324PWR can be used as a comparator, but it is not recommended due to its limited slew rate and bandwidth. A dedicated comparator IC is recommended for comparator applications.
-
To reduce noise and oscillations, use a decoupling capacitor (typically 10-100nF) between the power supply pins, and minimize the length of the input and output traces.