-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LM2902MX by ROHM Semiconductor
Results Overview of LM2902MX by ROHM Semiconductor
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LM2902MX Information
LM2902MX by ROHM Semiconductor is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LM2902MX
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 2032 |
|
RFQ | ||
|
|
Quest Components | IC,OP-AMP,QUAD,BIPOLAR,SOP,14PIN,PLASTIC | 1625 |
|
$1.8338 / $3.6675 | Buy Now |
Part Details for LM2902MX
LM2902MX CAD Models
LM2902MX Part Data Attributes
|
|
LM2902MX
ROHM Semiconductor
Buy Now
Datasheet
|
Compare Parts:
LM2902MX
ROHM Semiconductor
Operational Amplifier, 4 Func, 10000uV Offset-Max, BIPolar, PDSO14, ROHS COMPLIANT, SOP-14
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ROHM CO LTD | |
| Part Package Code | SOIC | |
| Package Description | ROHS COMPLIANT, SOP-14 | |
| Pin Count | 14 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | ROHM Semiconductor | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.5 µA | |
| Bias Current-Max (IIB) @25C | 0.25 µA | |
| Common-mode Reject Ratio-Min | 50 dB | |
| Common-mode Reject Ratio-Nom | 70 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 10000 µV | |
| JESD-30 Code | R-PDSO-G14 | |
| Length | 8.65 mm | |
| Low-Offset | NO | |
| Micropower | YES | |
| Number of Functions | 4 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LSOP | |
| Package Equivalence Code | SOP14,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, LOW PROFILE | |
| Packing Method | TAPE AND REEL | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.65 mm | |
| Supply Current-Max | 3 mA | |
| Supply Voltage Limit-Max | 26 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Voltage Gain-Min | 25000 | |
| Width | 3.9 mm |
Alternate Parts for LM2902MX
This table gives cross-reference parts and alternative options found for LM2902MX. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LM2902MX, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LM2902MX | onsemi | Check for Price | Operational Amplifier, Single Supply, Quad, SOIC-14 N, 3000-REEL | LM2902MX vs LM2902MX |
| LM2902KVQDR | ROHM Semiconductor | Check for Price | Operational Amplifier, 4 Func, 10000uV Offset-Max, BIPolar, PDSO14, ROHS COMPLIANT, SOIC-14 | LM2902MX vs LM2902KVQDR |
| LM2902M | Texas Instruments | Check for Price | Quad 26-V 1-MHz operational amplifier 14-SOIC -40 to 85 | LM2902MX vs LM2902M |
| LM2902MEP | Texas Instruments | Check for Price | QUAD OP-AMP, 7000uV OFFSET-MAX, PDSO14, SOIC-14 | LM2902MX vs LM2902MEP |
| LM2902M | Rochester Electronics LLC | Check for Price | Operational Amplifier, | LM2902MX vs LM2902M |
LM2902MX Frequently Asked Questions (FAQ)
-
The recommended operating voltage range for the LM2902MX is 4.75V to 16V, although it can operate up to 18V with reduced performance.
-
To ensure stability, make sure to decouple the power supply pins (VCC and GND) with a 0.1uF ceramic capacitor, and use a minimum of 1kΩ resistors in the feedback network. Also, avoid using long wires or traces for the feedback connections.
-
The maximum power dissipation of the LM2902MX is 1.4W, assuming a junction temperature of 150°C. However, this value can be derated based on the ambient temperature and package type.
-
Yes, the LM2902MX can be used as a comparator, but it's not recommended due to its op-amp architecture. The LM2902MX is optimized for amplification and filtering, not for high-speed comparison. For comparator applications, consider using a dedicated comparator IC like the LM2901 or LM339.
-
To protect the LM2902MX from ESD and overvoltage, use TVS diodes or ESD protection devices on the input pins, and consider adding a voltage clamp or overvoltage protection circuit on the power supply lines.