-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LIS3L02AQ3 by STMicroelectronics
Results Overview of LIS3L02AQ3 by STMicroelectronics
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Environmental Monitoring
Financial Technology (Fintech)
Smart Cities
Transportation and Logistics
Agriculture Technology
Medical Imaging
Virtual Reality (VR), Augmented Reality (AR), and Vision Systems
Education and Research
Consumer Electronics
Security and Surveillance
Audio and Video Systems
Healthcare
Communication and Networking
Entertainment and Gaming
Robotics and Drones
LIS3L02AQ3 Information
LIS3L02AQ3 by STMicroelectronics is an Other Signal Circuit.
Other Signal Circuits are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for LIS3L02AQ3
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
ComSIT USA | MEMS INERTIAL SENSOR: 3-AXIS +/-2G,+/-6G LINEAR ACCELEROMETER Analog Circuit, 1 Func, CMOS, PQCC44 ECCN: EAR99 RoHS: Compliant |
|
|
RFQ | |
|
|
Chip 1 Exchange | INSTOCK | 416 |
|
RFQ |
Part Details for LIS3L02AQ3
LIS3L02AQ3 CAD Models
LIS3L02AQ3 Part Data Attributes
|
|
LIS3L02AQ3
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
LIS3L02AQ3
STMicroelectronics
SPECIALTY ANALOG CIRCUIT, PQCC44, 7 X 7 MM, 1.80 MM PITCH, QFN-44
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | QFN | |
| Package Description | 7 X 7 MM, 1.80 MM PITCH, QFN-44 | |
| Pin Count | 44 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | STMicroelectronics | |
| Analog IC - Other Type | ANALOG CIRCUIT | |
| JESD-30 Code | S-PQCC-N44 | |
| Length | 7 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 44 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HQCCN | |
| Package Equivalence Code | LCC44,.28SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.9 mm | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.4 V | |
| Supply Voltage-Nom (Vsup) | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Width | 7 mm |
LIS3L02AQ3 Frequently Asked Questions (FAQ)
-
The recommended power-on sequence is to first apply VDD (supply voltage) and then VDDIO (interface voltage). This ensures that the internal voltage regulators are properly initialized.
-
The self-test feature can be enabled by setting the ST (self-test) bit in the CTRL_REG3 register. During self-test, the sensor outputs a predefined acceleration value. The self-test result can be read from the OUT_X, OUT_Y, and OUT_Z registers.
-
The interrupt pins can be configured to generate interrupts based on various events, such as data ready, overrun, or threshold exceedance. This allows the microcontroller to be notified when new data is available or when a specific condition is met.
-
The LIS3L02AQ3 does not require calibration in the classical sense. However, it is recommended to perform a zero-g offset calibration by taking measurements with the sensor at rest and then subtracting the resulting values from subsequent measurements.
-
The maximum sampling rate of the LIS3L02AQ3 is 1.6 kHz, which can be achieved by setting the ODR (output data rate) bits in the CTRL_REG1 register to 10 (1600 Hz).