-
Part Symbol
-
Footprint
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LFCN-800D+ by Mini-Circuits
Results Overview of LFCN-800D+ by Mini-Circuits
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Industrial Automation
Computing and Data Storage
Medical Imaging
Electronic Manufacturing
Communication and Networking
LFCN-800D+ Information
LFCN-800D+ by Mini-Circuits is a Ceramic Filter.
Ceramic Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for LFCN-800D+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
3157-LFCN-800D+TR-ND
|
DigiKey | CER FILTER 990MHZ LOW PASS Min Qty: 3000 Lead time: 8 Weeks Container: Tape & Reel (TR) | Temporarily Out of Stock |
|
$2.2920 | Buy Now |
|
DISTI #
139-LFCN-800D
|
Mouser Electronics | Signal Conditioning LOW PASS FLTR / SURF MT / RoHS RoHS: Compliant | 3562 |
|
$2.7500 / $4.1800 | Buy Now |
|
|
LCSC | 50 990MHz SMD3216-4P Ceramic Filters ROHS | 5 |
|
$3.4731 / $3.6571 | Buy Now |
Part Details for LFCN-800D+
LFCN-800D+ CAD Models
LFCN-800D+ Part Data Attributes
|
|
LFCN-800D+
Mini-Circuits
Buy Now
Datasheet
|
Compare Parts:
LFCN-800D+
Mini-Circuits
Ceramic LPF, 5 Section(s) Min, 5 Section(s) Max, 990MHz, ROHS COMPLIANT, CERAMIC, CASE FV1206, 4 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MINI-CIRCUITS | |
| Package Description | ROHS COMPLIANT, CERAMIC, CASE FV1206, 4 PIN | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Samacsys Manufacturer | Mini-Circuits | |
| Additional Feature | TAPE AND REEL | |
| Attenuation Frequency (+/- delta f)-Max | 510000 kHz | |
| Attenuation Frequency (+/- delta f)-Min | 410000 kHz | |
| Attenuation@Freq-Max | 30 dB | |
| Attenuation@Freq-Min | 20 dB | |
| Average Input Power | 9 W | |
| Center or Cutoff Frequency (fo/fc) | 990 MHz | |
| Filter Type | CERAMIC LPF | |
| Height | 0.94 mm | |
| Input/Output Impedance | 50 OHM | |
| Insertion Loss-Max | 3 dB | |
| JESD-609 Code | e3 | |
| Length | 3.2 mm | |
| Mounting Type | SURFACE MOUNT | |
| Number of Sections-Max | 5 | |
| Number of Sections-Min | 5 | |
| Number of Terminals | 4 | |
| Operating Temperature-Max | 100 °C | |
| Operating Temperature-Min | -55 °C | |
| Terminal Finish | MATTE TIN OVER NICKEL | |
| VSWR | 1.2 | |
| Width | 1.6 mm |
LFCN-800D+ Frequently Asked Questions (FAQ)
-
Mini-Circuits recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a via-stitched ground plane on the top layer. The device should be placed near the edge of the board to minimize signal reflections. A low-impedance path to ground is essential for the device's internal biasing network.
-
The LFCN-800D+ requires a 5V power supply and a bias current of 50mA. Ensure that the power supply is clean and well-regulated, and that the bias current is set correctly using the recommended bias resistor values. Improper biasing can lead to reduced performance and instability.
-
The LFCN-800D+ can handle input powers up to +15dBm. Exceeding this limit can cause compression, distortion, and potentially damage the device. Ensure that the input signal is attenuated or amplified accordingly to prevent overdrive.
-
The LFCN-800D+ is a broadband amplifier, but its performance can be optimized for specific frequency ranges by adjusting the input and output matching networks. Use simulation tools or consult with a Mini-Circuits application engineer to optimize the matching networks for your specific frequency range.
-
The typical noise figure of the LFCN-800D+ is around 2.5dB. To minimize noise, ensure that the input signal is clean and well-filtered, and that the device is operated at the recommended bias current and voltage. Additionally, use a low-noise power supply and minimize electromagnetic interference (EMI) in the surrounding environment.