Part Details for LFCN-80 by Mini-Circuits
Results Overview of LFCN-80 by Mini-Circuits
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Education and Research
Environmental Monitoring
Industrial Automation
Audio and Video Systems
Agriculture Technology
Medical Imaging
Entertainment and Gaming
LFCN-80 Information
LFCN-80 by Mini-Circuits is a Ceramic Filter.
Ceramic Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for LFCN-80
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 574 |
|
RFQ | ||
|
|
Quest Components | 7 SECTIONS - 7 SECTIONS, 145 MHz, CERAMIC LPF | 18 |
|
$6.0000 / $9.0000 | Buy Now |
|
|
Quest Components | 7 SECTIONS - 7 SECTIONS, 145 MHz, CERAMIC LPF | 6 |
|
$2.5000 / $3.7500 | Buy Now |
Part Details for LFCN-80
LFCN-80 CAD Models
LFCN-80 Part Data Attributes
|
|
LFCN-80
Mini-Circuits
Buy Now
Datasheet
|
Compare Parts:
LFCN-80
Mini-Circuits
Ceramic LPF, 7 Section(s) Min, 7 Section(s) Max, 145MHz, CASE FV1206, 4 PIN
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MINI-CIRCUITS | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Additional Feature | ATTENUATION MIN 20 DB AT 200 MHZ; ATTENUATION MAX 40 DB AT 1550 MHZ | |
| Attenuation Frequency (+/- delta f)-Max | 80000 kHz | |
| Attenuation Frequency (+/- delta f)-Min | 55000 kHz | |
| Attenuation@Freq-Max | 40 dB | |
| Attenuation@Freq-Min | 20 dB | |
| Average Input Power | 8.5 W | |
| Center or Cutoff Frequency (fo/fc) | 145 MHz | |
| Filter Type | CERAMIC LPF | |
| Height | 0.94 mm | |
| Input/Output Impedance | 50 OHM | |
| Insertion Loss-Max | 3 dB | |
| JESD-609 Code | e0 | |
| Length | 3.2 mm | |
| Mounting Type | SURFACE MOUNT | |
| Number of Sections-Max | 7 | |
| Number of Sections-Min | 7 | |
| Number of Terminals | 4 | |
| Operating Temperature-Max | 100 °C | |
| Operating Temperature-Min | -55 °C | |
| Terminal Finish | Tin/Lead (Sn10Pb90) | |
| VSWR | 1.2 | |
| Width | 1.6 mm |
LFCN-80 Frequently Asked Questions (FAQ)
-
Mini-Circuits provides a recommended PCB layout and footprint for LFCN-80 in their application notes. It's essential to follow these guidelines to ensure optimal performance and minimize parasitic effects.
-
While LFCN-80 is designed for 50 ohm systems, it can be used in non-50 ohm systems with some performance degradation. However, it's crucial to consider the impedance mismatch and its impact on the overall system performance.
-
The maximum power handling of LFCN-80 is not explicitly stated in the datasheet. However, according to Mini-Circuits, the device can handle up to 1W of continuous power without damage. Exceeding this limit may result in reduced performance or even device failure.
-
While LFCN-80 is a high-performance device, it's not specifically designed for high-reliability or space applications. For such applications, it's recommended to consult with Mini-Circuits or consider alternative devices that meet the required standards and specifications.
-
LFCN-80 is rated for operation up to 85°C. However, its performance may degrade at higher temperatures. If your application requires operation above 85°C, it's essential to consult with Mini-Circuits or consider alternative devices with higher temperature ratings.