Part Details for LF1005-S/SP22 by LEM Holdings SSA
Results Overview of LF1005-S/SP22 by LEM Holdings SSA
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LF1005-S/SP22 Information
LF1005-S/SP22 by LEM Holdings SSA is an Other Sensor/Transducer.
Other Sensors/Transducers are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Price & Stock for LF1005-S/SP22
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
000000000006372851
|
Sager | Industrial Current Sensors Min Qty: 1 | 0 |
|
$232.7700 / $270.9300 | Buy Now |
|
|
MacroQuest Electronics | ISO 9001: 2015, ISO 14001:2015, ISO 45001:2018, Lead time:6-8 Weeks | 21 Stock,2000 Available |
|
$105.8500 / $190.5700 | Buy Now |
Part Details for LF1005-S/SP22
LF1005-S/SP22 CAD Models
LF1005-S/SP22 Part Data Attributes
LF1005-S/SP22 Frequently Asked Questions (FAQ)
-
A good thermal management is crucial for the LF1005-S/SP22. It's recommended to use a multi-layer PCB with a large copper area for heat dissipation, and to place the device on a heat sink or a metal core PCB. A minimum of 2 oz copper thickness is recommended. Additionally, ensure good airflow around the device and avoid placing heat-sensitive components nearby.
-
To ensure accurate current measurement, it's essential to follow the recommended PCB layout and to use a low-impedance path for the current sensing lines. Additionally, use a high-precision shunt resistor and ensure that the sensing lines are well shielded to minimize electromagnetic interference (EMI). It's also recommended to use a low-noise, high-precision ADC for current measurement.
-
The maximum allowed voltage drop across the LF1005-S/SP22 is typically around 100 mV to 200 mV, depending on the specific application and operating conditions. Exceeding this voltage drop may lead to inaccurate current measurements or even damage the device. It's essential to ensure that the voltage drop is within the recommended range to maintain accurate and reliable operation.
-
The LF1005-S/SP22 does not have built-in overcurrent protection. It's recommended to use an external overcurrent protection circuit, such as a fuse or a current limiter, to prevent damage to the device and the system in case of an overcurrent condition. The protection circuit should be designed to respond quickly to overcurrent conditions and disconnect the power supply to prevent damage.
-
The LF1005-S/SP22 requires calibration to ensure accurate current measurement. The recommended calibration procedure involves applying a known current to the device and adjusting the gain and offset of the current sensing circuit to match the measured current. It's essential to follow the manufacturer's recommended calibration procedure to ensure accurate and reliable operation.