-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for LCDA12C-8 by Semtech Corporation
Results Overview of LCDA12C-8 by Semtech Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Robotics and Drones
LCDA12C-8 Information
LCDA12C-8 by Semtech Corporation is a Transient Suppressor.
Transient Suppressors are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for LCDA12C-8
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | TRANSIENT SUPPRESSOR DIODE ARRAY,BIDIRECTIONAL,12V V(RWM),SO | 102 |
|
$3.1395 / $7.2450 | Buy Now |
|
|
Vyrian | Diodes | 492 |
|
RFQ |
Part Details for LCDA12C-8
LCDA12C-8 CAD Models
LCDA12C-8 Part Data Attributes
|
|
LCDA12C-8
Semtech Corporation
Buy Now
Datasheet
|
Compare Parts:
LCDA12C-8
Semtech Corporation
Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Unidirectional, 16 Element, Silicon, MS-012AC, SOP-16
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | SEMTECH CORP | |
| Part Package Code | SOIC | |
| Package Description | R-PDSO-G16 | |
| Pin Count | 16 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.50 | |
| Samacsys Manufacturer | SEMTECH | |
| Additional Feature | LOW INDUCTANCE | |
| Breakdown Voltage-Min | 13.3 V | |
| Clamping Voltage-Max | 26.6 V | |
| Configuration | COMPLEX | |
| Diode Element Material | SILICON | |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE | |
| JEDEC-95 Code | MS-012AC | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e0 | |
| Non-rep Peak Rev Power Dis-Max | 500 W | |
| Number of Elements | 16 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Polarity | UNIDIRECTIONAL | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 12 V | |
| Surface Mount | YES | |
| Technology | AVALANCHE | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL |
Alternate Parts for LCDA12C-8
This table gives cross-reference parts and alternative options found for LCDA12C-8. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LCDA12C-8, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LCDA12C-8.TBT | Semtech Corporation | $4.4346 | Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Unidirectional, 16 Element, Silicon, MS-012AC, LEAD FREE, SOP-16 | LCDA12C-8 vs LCDA12C-8.TBT |
| LCDA12C-8.TE | Semtech Corporation | Check for Price | Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Bidirectional, 8 Element, Silicon, PLASTIC, SO-16 | LCDA12C-8 vs LCDA12C-8.TE |
LCDA12C-8 Frequently Asked Questions (FAQ)
-
Semtech recommends a 4-layer PCB with a solid ground plane, and to keep the signal traces as short as possible. Additionally, it's recommended to use a common mode filter or a ferrite bead to reduce EMI emissions.
-
To ensure reliable operation in high-temperature environments, it's recommended to follow proper thermal management practices, such as using a heat sink, and to operate the device within its specified temperature range. Additionally, it's recommended to use a thermal interface material to improve heat transfer between the device and the heat sink.
-
The maximum cable length that can be used with the LCDA12C-8 depends on the specific application and the type of cable used. However, as a general rule, it's recommended to keep the cable length as short as possible to minimize signal attenuation and reflections. Semtech recommends using a cable length of up to 10 meters for most applications.
-
To troubleshoot issues with the LCDA12C-8, it's recommended to follow a systematic approach, starting with checking the power supply and signal connections. Use an oscilloscope to verify the signal integrity and check for any signs of signal degradation or distortion. Additionally, it's recommended to consult the datasheet and application notes for troubleshooting guidelines specific to the LCDA12C-8.
-
Yes, the LCDA12C-8 can be used in a redundant or fault-tolerant system. However, it's recommended to follow proper design practices to ensure that the redundant system can operate correctly in the event of a failure. This may include using multiple LCDA12C-8 devices, and implementing a voting scheme or other fault-tolerant mechanism to ensure continued operation in the event of a failure.