Part Details for LAN8720A-CP-TR by SMSC
Results Overview of LAN8720A-CP-TR by SMSC
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LAN8720A-CP-TR Information
LAN8720A-CP-TR by SMSC is a Network Interface.
Network Interfaces are under the broader part category of Telecommunication Circuits.
A telecommunications circuit transmits and receives information between points. Key components include transmitters, receivers, amplifiers, and multiplexers. Read more about Telecommunication Circuits on our Telecommunication Circuits part category page.
Part Details for LAN8720A-CP-TR
LAN8720A-CP-TR CAD Models
LAN8720A-CP-TR Part Data Attributes
|
|
LAN8720A-CP-TR
SMSC
Buy Now
Datasheet
|
Compare Parts:
LAN8720A-CP-TR
SMSC
Ethernet Transceiver, 1-Trnsvr, CMOS, 4 X 4 MM, 0.85 MM HEIGHT, ROHS COMPLIANT, QFN-24
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | STANDARD MICROSYSTEMS CORP | |
| Part Package Code | QFN | |
| Package Description | 4 X 4 MM, 0.85 MM HEIGHT, ROHS COMPLIANT, QFN-24 | |
| Pin Count | 24 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Data Rate | 100000 Mbps | |
| JESD-30 Code | S-XQCC-N24 | |
| Length | 4 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 24 | |
| Number of Transceivers | 1 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | ||
| Package Body Material | UNSPECIFIED | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC24,.16SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1 mm | |
| Supply Current-Max | 0.054 mA | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Telecom IC Type | ETHERNET TRANSCEIVER | |
| Temperature Grade | OTHER | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Width | 4 mm |
Alternate Parts for LAN8720A-CP-TR
This table gives cross-reference parts and alternative options found for LAN8720A-CP-TR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LAN8720A-CP-TR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LAN8720A-CP-TR | Microchip Technology Inc | $0.9758 | DATACOM, ETHERNET TRANSCEIVER, QCC24, 4 X 4 MM, 0.85 MM HEIGHT, ROHS COMPLIANT, QFN-24 | LAN8720A-CP-TR vs LAN8720A-CP-TR |
LAN8720A-CP-TR Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the LAN8720A-CP-TR can be found in the SMSC application note AN2054, which provides guidelines for PCB design, component placement, and routing to ensure optimal performance and minimize EMI.
-
The LAN8720A-CP-TR supports auto-negotiation through the use of the ANA (Auto-Negotiation Advertisement) registers. The device can be configured for auto-negotiation by setting the ANA registers to advertise the desired speed and duplex mode. The specific configuration will depend on the application and the link partner.
-
The LAN8720A-CP-TR supports cable lengths up to 100 meters, as specified in the IEEE 802.3u standard for Fast Ethernet. However, the actual cable length that can be supported may be shorter depending on the quality of the cable and the environment in which it is used.
-
The LAN8720A-CP-TR has a built-in power management feature that allows it to be powered down when not in use. This can be implemented through the use of the Power Down (PD) pin, which can be controlled by the system's power management circuitry. Additionally, the device can be configured to enter a low-power mode during periods of inactivity.
-
The LAN8720A-CP-TR has an operating temperature range of -40°C to +85°C, making it suitable for use in a wide range of applications, including industrial and automotive systems.