Part Details for LAN8710A-EZC by SMSC
Results Overview of LAN8710A-EZC by SMSC
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LAN8710A-EZC Information
LAN8710A-EZC by SMSC is a Network Interface.
Network Interfaces are under the broader part category of Telecommunication Circuits.
A telecommunications circuit transmits and receives information between points. Key components include transmitters, receivers, amplifiers, and multiplexers. Read more about Telecommunication Circuits on our Telecommunication Circuits part category page.
Part Details for LAN8710A-EZC
LAN8710A-EZC CAD Models
LAN8710A-EZC Part Data Attributes
|
|
LAN8710A-EZC
SMSC
Buy Now
Datasheet
|
Compare Parts:
LAN8710A-EZC
SMSC
Ethernet Transceiver, CMOS, 5 X 5 MM, 0.90 MM HEIGHT, ROHS COMPLIANT, QFN-32
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | STANDARD MICROSYSTEMS CORP | |
| Part Package Code | QFN | |
| Package Description | 5 X 5 MM, 0.90 MM HEIGHT, ROHS COMPLIANT, QFN-32 | |
| Pin Count | 32 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| JESD-30 Code | S-XQCC-N32 | |
| Length | 5 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 32 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | ||
| Package Body Material | UNSPECIFIED | |
| Package Code | HVQCCN | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1 mm | |
| Supply Voltage-Nom | 1.2 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Telecom IC Type | ETHERNET TRANSCEIVER | |
| Temperature Grade | OTHER | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Width | 5 mm |
LAN8710A-EZC Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the LAN8710A-EZC is to follow the layout guidelines provided in the SMSC application note AN19, which includes recommendations for component placement, routing, and thermal management.
-
The LAN8710A-EZC can be configured for half-duplex or full-duplex operation through the PHY control register (Register 0x1F). Setting bit 12 to 0 enables half-duplex mode, while setting it to 1 enables full-duplex mode.
-
The LAN8710A-EZC supports cable lengths up to 100 meters, as specified in the IEEE 802.3u standard for Fast Ethernet.
-
The LAN8710A-EZC has a built-in power management feature that can be controlled through the Power Management Register (Register 0x1E). The device can be put into low-power mode by setting bit 15 to 1, and can be woken up by an external interrupt or by setting bit 15 to 0.
-
The recommended clock source for the LAN8710A-EZC is a 25 MHz crystal oscillator, which is connected to the XTAL1 and XTAL2 pins. The device can also be clocked from an external clock source, but this requires additional circuitry and is not recommended.