Part Details for KSA0V311LFTR by C&K
Results Overview of KSA0V311LFTR by C&K
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (6 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Renewable Energy
KSA0V311LFTR Information
KSA0V311LFTR by C&K is a Keypad Switch.
Keypad Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for KSA0V311LFTR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
KSA0V311LFTR
|
TTI | Tactile Switches Switch Tact Short Vert Sealed RoHS: Compliant Min Qty: 2500 Package Multiple: 2500 Container: Reel |
Americas - 5000 In Stock |
|
$0.3800 / $0.3950 | Buy Now |
|
DISTI #
KSA0V311LFTR
|
TME | Microswitch TACT, SPST-NO, Pos: 2, 0.05A/32VDC, THT, 1.3N, 4.7mm Min Qty: 10000 | 0 |
|
$0.5130 | RFQ |
|
DISTI #
000000000005592764
|
Sager | Tactile Switches Switch Tact Short Vert Sealed Min Qty: 2500 | 0 |
|
$0.5150 | Buy Now |
|
|
New Advantage Corporation | RoHS: Compliant Min Qty: 1 Package Multiple: 2500 | 10000 |
|
$0.4272 | Buy Now |
Part Details for KSA0V311LFTR
KSA0V311LFTR CAD Models
KSA0V311LFTR Part Data Attributes
|
|
KSA0V311LFTR
C&K
Buy Now
Datasheet
|
Compare Parts:
KSA0V311LFTR
C&K
Keypad Switch
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | C & K COMPONENTS LLC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.40 | |
| Samacsys Manufacturer | C & K COMPONENTS | |
| Actuator Travel | 0.5 mm | |
| Actuator Type | SHORT HARD PLASTIC TYPE | |
| Body Breadth | 7.7 mm | |
| Body Length or Diameter | 8.77 mm | |
| Center Contact Material | SILVER | |
| Circuit Configuration | 1X1 | |
| Contact Bounce Time-Max | 1 ms | |
| Contact Current(DC)-Max | 0.05 A | |
| Contact (DC) Max Power Rating R Load | 1VA@32VDC | |
| Contact (DC) Max Rating R Load | 0.05A@32VDC | |
| Contact Resistance | 0.1 mΩ | |
| Contact Voltage(DC)-Max | 32 V | |
| Dielectric Withstand Volts | 250VRMS V | |
| Electrical Life | 1000000 Cycle(s) | |
| End Contact Material | SILVER | |
| Insulation Resistance | 1000000000 Ω | |
| Mounting Feature | THROUGH HOLE-RIGHT ANGLE | |
| Number of Switches | 1 | |
| Operating Force-Max | 1.3 N | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| PCB Hole Count | 4 | |
| Packing Method | BULK | |
| Sealing | IP60 | |
| Solderability | WAVE | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPST | |
| Switch Type | KEYPAD SWITCH | |
| Terminal Length | 0.187 inch | |
| Termination Type | SOLDER |
Alternate Parts for KSA0V311LFTR
This table gives cross-reference parts and alternative options found for KSA0V311LFTR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of KSA0V311LFTR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| KSA0A331LFTR | C&K | $1.3187 | Keypad Switch | KSA0V311LFTR vs KSA0A331LFTR |
| KSL0M332LFT | C&K | Check for Price | KEYPAD SWITCH, SPST, MOMENTARY-TACTILE, 0.01A, 32VDC, 1.3N, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT | KSA0V311LFTR vs KSL0M332LFT |
| KSL0V311 | C&K | Check for Price | PUSHBUTTON SWITCH,RIGHT ANGLE,SPST,PC TAIL TERMINAL,4 | KSA0V311LFTR vs KSL0V311 |
| KSL0M331LFT | C&K | Check for Price | KEYPAD SWITCH, SPST, MOMENTARY-TACTILE, 0.01A, 32VDC, 1.8N, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT | KSA0V311LFTR vs KSL0M331LFT |
| KSL0M312LFT | C&K | Check for Price | KEYPAD SWITCH, SPST, MOMENTARY-TACTILE, 0.05A, 32VDC, 1.3N, THROUGH HOLE-STRAIGHT, ROHS COMPLIANT | KSA0V311LFTR vs KSL0M312LFT |
| KSL0M331LFTR | C&K | Check for Price | Keypad Switch | KSA0V311LFTR vs KSL0M331LFTR |
KSA0V311LFTR Frequently Asked Questions (FAQ)
-
The recommended soldering temperature for the KSA0V311LFTR is between 250°C to 260°C for a maximum of 5 seconds.
-
Yes, the KSA0V311LFTR is compatible with lead-free soldering processes.
-
The maximum operating temperature range for the KSA0V311LFTR is -40°C to 85°C.
-
Yes, the KSA0V311LFTR is designed to withstand high-vibration environments and is suitable for use in applications with high mechanical stress.
-
Yes, the KSA0V311LFTR is compliant with the RoHS and REACH directives, making it suitable for use in EU-based applications.