Part Details for KBPC606 by Yangzhou Yangjie Electronics Co Ltd
Results Overview of KBPC606 by Yangzhou Yangjie Electronics Co Ltd
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Electronic Manufacturing
KBPC606 Information
KBPC606 by Yangzhou Yangjie Electronics Co Ltd is a Bridge Rectifier Diode.
Bridge Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for KBPC606
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
KBPC606-YAN
|
TME | Bridge rectifier: single-phase, Urmax: 600V, If: 6A, Ifsm: 150A Min Qty: 1 | 86 |
|
$0.2400 / $0.9460 | Buy Now |
Part Details for KBPC606
KBPC606 CAD Models
KBPC606 Part Data Attributes
|
|
KBPC606
Yangzhou Yangjie Electronics Co Ltd
Buy Now
Datasheet
|
Compare Parts:
KBPC606
Yangzhou Yangjie Electronics Co Ltd
Bridge Rectifier Diode, 6A, 600V V(RRM),
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | YANGZHOU YANGJIE ELECTRONICS CO LTD | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Configuration | BRIDGE, 4 ELEMENTS | |
| Diode Element Material | SILICON | |
| Diode Type | BRIDGE RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1 V | |
| Non-rep Pk Forward Current-Max | 150 A | |
| Number of Elements | 4 | |
| Number of Phases | 1 | |
| Operating Temperature-Max | 150 °C | |
| Output Current-Max | 6 A | |
| Rep Pk Reverse Voltage-Max | 600 V | |
| Surface Mount | NO |
Alternate Parts for KBPC606
This table gives cross-reference parts and alternative options found for KBPC606. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of KBPC606, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| KBPC606 | Vishay Intertechnologies | Check for Price | Bridge Rectifier Diode, 1 Phase, 6A, 600V V(RRM), Silicon, ROHS COMPLIANT, D-72, 4 PIN | KBPC606 vs KBPC606 |
| GBPC606 | Vishay Intertechnologies | Check for Price | Bridge Rectifier Diode, 6A, 600V V(RRM), | KBPC606 vs GBPC606 |
| GBPC606/1 | Vishay Semiconductors | Check for Price | Bridge Rectifier Diode, 3A, 600V V(RRM), | KBPC606 vs GBPC606/1 |
KBPC606 Frequently Asked Questions (FAQ)
-
The recommended PCB layout for optimal thermal performance involves placing the device near a thermal pad or a heat sink, ensuring good thermal conductivity, and keeping the PCB traces as short and wide as possible to minimize thermal resistance.
-
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves, provide adequate heat sinking, and ensure good airflow around the device. Additionally, consider using a thermal interface material to improve heat transfer.
-
The recommended soldering temperature for the KBPC606 is between 250°C to 260°C, with a maximum soldering time of 5 seconds. It's essential to follow the manufacturer's recommended soldering profile to prevent damage to the device.
-
Yes, the KBPC606 can be used in switching power supply designs, but it's essential to consider the device's reverse recovery time, voltage rating, and current handling capabilities to ensure reliable operation. Additionally, proper snubber circuits and layout considerations are crucial to minimize electromagnetic interference (EMI).
-
To protect the KBPC606 from voltage transients and surges, consider adding a transient voltage suppressor (TVS) diode or a metal-oxide varistor (MOV) in parallel with the device. This will help absorb voltage spikes and prevent damage to the rectifier.