Part Details for K8BU41GLFS by C&K
Results Overview of K8BU41GLFS by C&K
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
K8BU41GLFS Information
K8BU41GLFS by C&K is a Keypad Switch.
Keypad Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for K8BU41GLFS
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
K8BU41GLFS
|
TME | Microswitch TACT, SPST-NO, Pos: 2, 0.05A/32VDC, SMT, LED, 4N, 6mm Min Qty: 4500 | 0 |
|
$3.2400 | RFQ |
|
DISTI #
K8BU41GLFS
|
IBS Electronics | SWITCH TACTILE N.O. SPST BUTTON GULL WING 0.05A 32VDC 1VA 300000CYCLES 4N SMD AUTOMOTIVE T/R Min Qty: 900 Package Multiple: 1 | 0 |
|
$3.7180 | Buy Now |
|
DISTI #
000000000005592735
|
Sager | Tactile Switches Lighted SMT Tact Blue, 4N, Gold Min Qty: 900 | 0 |
|
$2.8600 | Buy Now |
Part Details for K8BU41GLFS
K8BU41GLFS CAD Models
K8BU41GLFS Part Data Attributes
|
|
K8BU41GLFS
C&K
Buy Now
Datasheet
|
Compare Parts:
K8BU41GLFS
C&K
KEYPAD SWITCH
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | C & K COMPONENTS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.40 | |
| Factory Lead Time | 22 Weeks | |
| Samacsys Manufacturer | C & K COMPONENTS | |
| Actuator Length | 0.045 inch | |
| Actuator Travel | 0.45 mm | |
| Additional Feature | BLUE COLOR LED | |
| Body Breadth | 8 mm | |
| Body Height | 4.85 mm | |
| Body Length or Diameter | 8.4 mm | |
| Center Contact Material | SILVER | |
| Center Contact Plating | SILVER | |
| Circuit Configuration | 1X1 | |
| Contact Bounce Time-Max | 10 ms | |
| Contact Current(DC)-Max | 0.05 A | |
| Contact (DC) Max Power Rating R Load | 1VA@32VDC | |
| Contact (DC) Max Rating R Load | 0.001A@32VDC | |
| Contact Resistance | 0.1 mΩ | |
| Contact Voltage(DC)-Max | 32 V | |
| Dielectric Withstand Volts | 250VRMS V | |
| Electrical Life | 300000 Cycle(s) | |
| End Contact Material | SILVER | |
| End Contact Plating | SILVER | |
| Illumination | BLUE LED | |
| Insulation Resistance | 1000000000 Ω | |
| Mounting Feature | SURFACE MOUNT-STRAIGHT | |
| Number of Switches | 1 | |
| Operating Force-Max | 4 N | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Packing Method | TR, 15 INCH | |
| Sealing | IP40 | |
| Surface Mount | NO | |
| Switch Action | MOMENTARY | |
| Switch Function | SPST | |
| Switch Type | KEYPAD SWITCH | |
| Termination Type | SOLDER |
Alternate Parts for K8BU41GLFS
This table gives cross-reference parts and alternative options found for K8BU41GLFS. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of K8BU41GLFS, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| KMS223GPLFS | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KMS223GPLFS |
| KSC821JLFS | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KSC821JLFS |
| KSC421V2RTLFS | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KSC421V2RTLFS |
| KSEK43JLFS | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KSEK43JLFS |
| KSC921GLFG | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KSC921GLFG |
| KSC941JLFS | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KSC941JLFS |
| KMS221GPLFG | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KMS221GPLFG |
| K8BU43GLFS | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs K8BU43GLFS |
| KMS233GPLFS | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KMS233GPLFS |
| KSC941GLFG | C&K | Check for Price | KEYPAD SWITCH | K8BU41GLFS vs KSC941GLFG |
K8BU41GLFS Frequently Asked Questions (FAQ)
-
The recommended soldering temperature is between 250°C to 260°C for a maximum of 5 seconds.
-
Handle the device in an ESD-protected environment, wear an ESD wrist strap, and use ESD-safe packaging and tools.
-
The maximum operating frequency is 100 MHz, but it's recommended to consult the datasheet for specific frequency-related characteristics.
-
The device is rated for operation up to 85°C, but it's recommended to derate the voltage and current ratings for temperatures above 70°C.
-
The device has a polarity marker (a white dot or a notch) indicating the correct orientation; ensure the marker is aligned with the PCB's polarity indicator.